- The experimental study of the effect of zinc phosphate cement on the solubility of enamel
-
Kim SN
- KMID: 1675741
- Korean J Orthod.
- 1975 Dec;5(1):21-24.
The purpose of this study was to investigate the effect of sinc phosphate cement on the enamel surface of extracted teeth. The tooth was placed in a test tube, which... -
- CITED
-
- Close
- SHARE
-
- Close
- STUDY OF THE EFFECT OF ULTRASONIC INSTRUMENTATION ON BOND STRENGTH OF SEVERAL DENTAL CEMENTS
-
Kim WS, Lim JH, Cho IH
- KMID: 2118578
- J Korean Acad Prosthodont.
- 1997 Sep;35(3):504-516.
Ultrasonic instruments transfer electrical energy to mechanical energy resulting in vibration used for various dental treatments. If we could know the effect of ultrasonic instruments on the dental cements within the... -
- CITED
-
- Close
- SHARE
-
- Close
- A literature review on cementation of implant prosthesis
-
Lee ES, Ko KH, Huh YH, Park CJ, Cho LR
- KMID: 2388227
- J Korean Acad Prosthodont.
- 2016 Oct;54(4):458-467.
- doi: 10.4047/jkap.2016.54.4.458
Cement-retained implant prosthesis has several advantages in the esthetic and occlusal aspects. However, the difficulty of the retrievability and the possibility of peri-implantitis induced by the cement excess would be... -
- CITED
-
- Close
- SHARE
-
- Close
- Biomechanical three-dimensional finite element analysis of monolithic zirconia crown with different cement type
-
Ha SR
- KMID: 2176623
- J Adv Prosthodont.
- 2015 Dec;7(6):475-483.
- doi: 10.4047/jap.2015.7.6.475
PURPOSE: The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the retention of the full veneer casted gold crowns with varying convergence angle, crown length and dental cements
-
Yun JH, Cho JH, Kim JH, Lee KW
- KMID: 2045112
- J Korean Acad Prosthodont.
- 2013 Apr;51(2):99-106.
- doi: 10.4047/jkap.2013.51.2.99
PURPOSE: The aim of this research was to establish the effect and variation in differing convergence angle and length of abutment on the retention of full veneer casted gold crown. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- THE EFFECT OF CYCLIC LOADING ON THE RETENTIVE STRENGTH OF FULL VENEER CROWNS
-
Kim KY, Lee SH, Chung HY, Yang JH, Heo SJ
- KMID: 2195953
- J Korean Acad Prosthodont.
- 2000 Oct;38(5):583-594.
Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the complete retrieval system of the cementation type implant abutment
-
Choi JH, Lee JB
- KMID: 2195752
- J Korean Acad Prosthodont.
- 2004 Oct;42(5):597-607.
PURPOSE: This study was performed to investigate the retrievability of the cemented crown from the cementation type implant abutment. MATERIAL AND METHOD: The cementation type implant abutments (NEOBIOTECH implant abutment... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY OF CORE TYPE AND LUTING CEMENTS ON COMPLETE CAST CROWN RETENTION
-
Paek SH, Chang IT, Lee SH, Yang JH, Heo SJ
- KMID: 2196016
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):169-177.
The purpose of this study was to compare the retention of complete cast crown over amalgam cores, composite resin cores, and cast gold cores when cemented with three different luting... -
- CITED
-
- Close
- SHARE
-
- Close
- MARGINAL FITNESS AND MARGINAL LEAKAGE OF FIBER-REINFORCED COMPOSITE CROWNS DEPENDING UPON LUTING CEMENTS
-
Kim SJ, Shin SW, Han JS, Suh KW
- KMID: 2195958
- J Korean Acad Prosthodont.
- 2000 Oct;38(5):618-630.
As Fiber-reinforced composite restorations cannot be made without leaving a marginal gap, luting cements play a pivotal role in sealing the margins as a prevention against margnal leakage. A recently... -
- CITED
-
- Close
- SHARE
-
- Close
- SHEAR BOND STRENGTH OF LUTING CEMENTS TO DENTIN TREATED WITH RESIN BONDING AGENTS
-
Kim KC, Choi BB
- KMID: 2195352
- J Korean Acad Prosthodont.
- 1998 Feb;36(1):26-49.
The purpose of this study was to confirm the formation of hybrid layer and resin tags in dentin tissue and the possibility of bonding between luting cements used for the... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of Hybrid Coat on shear bond strength of five cements: an in vitro study
-
Guo Y, Zhou HD, Feng YZ
- KMID: 2398049
- J Adv Prosthodont.
- 2017 Dec;9(6):447-452.
- doi: 10.4047/jap.2017.9.6.447
PURPOSE: To evaluate the sealing performance of Hybrid Coat and its influence on the shear bond strength of five dentin surface cements. MATERIALS AND METHODS: Six premolars were pretreated to expose... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro cytotoxicity of four kinds orthodontic band cements
-
Lee WC, Park SB
- KMID: 2074786
- Korean J Orthod.
- 2004 Aug;34(4):351-362.
Orthodontic band cements are widely used in the fields of orthodontics, but they are commonly known as cytotoxic material. Within an oral cavity several ions and components are released from... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of effect of desensitizing agents on the retention of crowns cemented with luting agents: an in vitro study
-
Jalandar S, Pandharinath DS, Arun K, Smita V
- KMID: 2176406
- J Adv Prosthodont.
- 2012 Aug;4(3):127-133.
- doi: 10.4047/jap.2012.4.3.127
PURPOSE: Many dentists use desensitizing agents to prevent hypersensitivity. This study compared and evaluated the effect of two desensitizing agents on the retention of cast crowns when cemented with various... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of adhesive luting on the fracture resistance of zirconia compared to that of composite resin and lithium disilicate glass ceramic
-
Lim MJ, Lee KW
- KMID: 2367315
- Restor Dent Endod.
- 2017 Feb;42(1):1-8.
- doi: 10.5395/rde.2017.42.1.1
OBJECTIVES: The purpose of this study was to evaluate the effect of adhesive luting on the fracture resistance of zirconia compared to that of a composite resin and a lithium... -
- CITED
-
- Close
- SHARE
-
- Close
- INFLUENCE OF TOOTH SURFACE ROUGHNESS AND TYPE OF CEMENT ON RETENTION OF COMPLETE CAST CROWNS
-
Kim KS, Song CY, Ahn SG, Park CW
- KMID: 2321670
- J Korean Acad Prosthodont.
- 1999 Aug;37(4):465-473.
Bond strength of luting cements to dentin is a critical consideration for success of complete cast crowns. This study was performed to evaluate the relationship between surface characteristics of teeth... -
- CITED
-
- Close
- SHARE
-
- Close
- Bilateral Serous Retinal Detachment Associated With Alport's Syndrome
-
Song YB, Park SP
- KMID: 2337824
- J Korean Ophthalmol Soc.
- 2010 Mar;51(3):463-468.
PURPOSE: To report a case of bilateral serous retinal detachment associated with Alport's syndrome that resolved following intensive blood pressure control and electrolyte imbalance correction. CASE SUMMARY: A 50-year-old male patient... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of ultrasonic tip designs on intraradicular post removal
-
Aguiar AC, de Meireles DA, Marques AA, Sponchiado Junior EC, Garrido AD, Garcia LD
- KMID: 2316906
- Restor Dent Endod.
- 2014 Nov;39(4):265-269.
- doi: 10.5395/rde.2014.39.4.265
OBJECTIVES: To evaluate the effect of different ultrasonic tip designs on intraradicular post removal. MATERIALS AND METHODS: The crowns of forty human canine teeth were removed, and after biomechanical preparation and... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of micro CT and cross-section technique for evaluation of marginal and internal fit of lithium disilicate crowns
-
Ko IS, Kim JM, Cho HW
- KMID: 2344860
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):226-233.
- doi: 10.4047/jkap.2016.54.3.226
PURPOSE: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different... -
- CITED
-
- Close
- SHARE
-
- Close
- Dislodgement resistance of modified resin-bonded fixed partial dentures utilizing tooth undercuts: an in vitro study
-
Doh RM, Lee KW
- KMID: 2045468
- J Adv Prosthodont.
- 2009 Jul;1(2):85-90.
- doi: 10.4047/jap.2009.1.2.85
STATEMENT OF PROBLEM: Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY ON FRACTURE STRENGTH OF COLLARLESS METAL CERAMIC CROWN WITH DIFFERENT METAL COPING DESIGN
-
Yun JW, Yang JH, Chang IT, Lee SH, Chung HY
- KMID: 2321669
- J Korean Acad Prosthodont.
- 1999 Aug;37(4):454-464.
The metal ceramic crown is currently the most popular complete veneer restoration in dentistry, but in many cases, the metal cervical collar at the facial margin is unesthetic and unacceptable.... -
- CITED
-
- Close
- SHARE
-
- Close
