Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

11 results
Display

Evaluation of the reproducibility of various abutments using a blue light model scanner

Kim DY, Lee KE, Jeon JH, Kim JH, Kim WC

PURPOSE: To evaluate the reproducibility of scan-based abutments using a blue light model scanner. MATERIALS AND METHODS: A wax cast abutment die was fabricated, and a silicone impression was prepared using...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A study on the machining accuracy of dental digital method focusing on dental inlay

Bae EJ, Jeong ID, Kim WC, Kim JH

PURPOSE: The purpose of this study was to compare the cutting method and the lamination method to investigate whether the CAD data of the proposed inlay shape are machined correctly. MATERIALS...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Polish of interface areas between zirconia, silicate-ceramic, and composite with diamond-containing systems

Pott PC, Hoffmann J, Stiesch M, Eisenburger M

PURPOSE: Fractures, occlusal adjustments, or marginal corrections after removing excess composite cements result in rough surfaces of all-ceramic FPDs. These have to be polished to prevent damage of the surrounding...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of nonthermal argon plasma on the shear bond strength between zirconia and different adhesives and luting composites after artificial aging

Pott PC, Syväri TS, Stiesch M, Eisenburger M

PURPOSE: Plasma activation of hydrophobic zirconia surfaces might be suitable to improve the bond strength of luting materials. The aim of this study was to analyze the influence of nonthermal...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
In vitro performance and fracture resistance of novel CAD/CAM ceramic molar crowns loaded on implants and human teeth

Preis V, Hahnel S, Behr M, Rosentritt M

PURPOSE: To investigate the fatigue and fracture resistance of computer-aided design and computer-aided manufacturing (CAD/CAM) ceramic molar crowns on dental implants and human teeth. MATERIALS AND METHODS: Molar crowns (n=48; n=8/group)...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement

Çetindemir AB, Şermet B, Öngül D

PURPOSE: To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of the amount of tooth surface preparation on the shear bond strength of zirconia cantilever single-retainer resin-bonded fixed partial denture

Sillam CE, Cetik S, Ha TH, Atash R

PURPOSE: Conventional resin-bonded fixed partial dentures (RBFPDs) are usually made with a two-retainer design. Unlike conventional RBFPDs, cantilever resin-bonded fixed partial dentures (Cantilever RBFPDs) are, for their part, made with...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The accuracy of a 3D printing surgical guide determined by CBCT and model analysis

Ma B, Park T, Chun I, Yun K

PURPOSE: The aim of this clinical study was to assess the accuracy of the implants placed using a universal digital surgical guide. MATERIALS AND METHODS: Among 17 patients, 28 posterior implants...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing

Şen N, Tuncelli B, Göller G

PURPOSE: The purpose of this in vitro study was to evaluate the effect of abrasive toothbrushing on the surface properties of monolithic computer-assisted design and computer-assisted manufacturing (CAD/CAM) materials stored...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy of new implant impression technique using dual arch tray and bite impression coping

Lee SE, Yang SE, Lee CW, Lee WS, Lee SY

PURPOSE: The purpose of this in vitro study was to evaluate the accuracy of a new implant impression technique using bite impression coping and a dual arch tray. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of zirconia surface architecturing technique on the zirconia/veneer interfacial bond strength

Her SB, Kim KH, Park SE, Park EJ

PURPOSE: The purpose of this study was to evaluate the effect of the zirconia surface architecturing technique (ZSAT) on the bond strength between veneering porcelain and zirconia ceramic. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2021 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr