- The comparison of shear strength and bracket placement between bonding techniques
-
Pak YK, Kook YA, Kim SC
- KMID: 2271515
- Korean J Orthod.
- 1991 Nov;21(3):513-520.
The purpose of this study was to compare the bracket placement and the shear bond strength of indirect-bonded brackets with those of direct-bonded ones. Forty eight extracted human teeth were... -
- CITED
-
- Close
- SHARE
-
- Close
- A study of bonding strength and change of bracket slot width of chemically recycled metal brackets
-
Ko YS, Lee DJ
- KMID: 1977158
- Korean J Orthod.
- 1990 Jul;20(2):283-291.
The purpose of this study was to measure and compare tensile and shear strength for 4 types of new direct-bonding brackets and same brackets after recycling and to evaluate the... -
- CITED
-
- Close
- SHARE
-
- Close
- Macro-shear bond strength and micro-shear bond strength of ceromer bonded to metal alloy and fiber reinforced composite
-
Park HY, Cho LR, Cho KM, Park CJ
- KMID: 2000769
- J Korean Acad Prosthodont.
- 2004 Dec;42(6):654-663.
STATEMENT OF PROBLEM: According to the fracture pattern in several reports, fractures most frequently occur in the interface between the ceromer and the substructure. PURPOSE: The aim of this in... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of ceramic and resin brackets used with visible light-cured adhesives
-
Hwang YS, Row J, Hwang CJ
- KMID: 2037995
- Korean J Orthod.
- 1996 Apr;26(2):233-244.
The purpose of this study was to compare the shear bond strength obtained from ceramic and plastic brackets bonded with various light-cured adhesives and to evaluate their debonded failure sites.... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of orthodontic bonding resins to porcelain; an in vitro study
-
Ko JH, Lee KS
- KMID: 2271530
- Korean J Orthod.
- 1992 Mar;22(1):43-65.
Bonding orthodontic adhesive resins to glazed porcelain surface is not attainable. The aim of this investigation was to examine, in vitro, the effect of three methods of porcelain surface pretreatment... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of composite resin core used in combination with various resin cements and dentin bonding agents
-
Kim HO, Vang MS
- KMID: 2195786
- J Korean Acad Prosthodont.
- 2004 Feb;42(1):30-40.
PURPOSE: The purpose of this study was aimed to compare the shear bond strength on dentin of three dentin bonding agents and two resin cements used in conjunction with self-cured... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of veneering porcelain to zirconia and metal cores
-
Choi BK, Han JS, Yang JH, Lee JB, Kim SH
- KMID: 2392502
- J Adv Prosthodont.
- 2009 Nov;1(3):129-135.
STATEMENT OF PROBLEM: Zirconia-based restorations have the common technical complication of delamination, or porcelain chipping, from the zirconia core. Thus the shear bond strength between the zirconia core and the... -
- CITED
-
- Close
- SHARE
-
- Close
- An effect of immediate dentin sealing on the shear bond strength of resin cement to porcelain restoration
-
Choi YS, Cho IH
- KMID: 1456752
- J Adv Prosthodont.
- 2010 Jun;2(2):39-45.
- doi: 10.4047/jap.2010.2.2.39
PURPOSE: The aim of this study was to determine differences in shear bond strength to human dentin using immediate dentin sealing (IDS) technique compared to delayed dentin sealing (DDS). MATERIAL AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Tooth surface treatment strategies for adhesive cementation
-
Rohr N, Fischer J
- KMID: 2376294
- J Adv Prosthodont.
- 2017 Apr;9(2):85-92.
- doi: 10.4047/jap.2017.9.2.85
PURPOSE: The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of dentin surface roughness on the shear bond strength of resin bonded restorations
-
Koodaryan , Hafezeqoran A, Poursoltan S
- KMID: 2376848
- J Adv Prosthodont.
- 2016 Jun;8(3):224-228.
- doi: 10.4047/jap.2016.8.3.224
PURPOSE: This study aimed to investigate whether dentin surface preparation with diamond rotary instruments of different grit sizes affects the shear bond strength of resin-bonded restorations. MATERIALS AND METHODS: The buccal... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the shear bond strengths and shrinkage stresses of various domestic composite resins
-
Lee JM, Park SY, Lee SH, Jih MK, Lee NY
- KMID: 2470502
- Oral Biol Res.
- 2019 Dec;43(4):250-258.
- doi: 10.21851/obr.43.04.201912.250
The aim of this study was to evaluate the shrinkage stresses and shear bond strengths of various domestic composite resins by comparing them using Filtek Z-250â„¢ (3M ESPE, USA). In... -
- CITED
-
- Close
- SHARE
-
- Close
- The feasibility of shear wave elastography for diagnosing superficial benign soft tissue masses
-
Yeoh HJ, Kim TY, Ryu JA
- KMID: 2433290
- Ultrasonography.
- 2019 Jan;38(1):37-43.
- doi: 10.14366/usg.17059
PURPOSE: The purpose of this study was to investigate the feasibility of shear wave ultrasound elastography for differentiating superficial benign soft tissue masses through a comparison of their shear moduli. METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of indirect composite material to monolithic zirconia
-
Sari F, Secilmis A, Simsek I, Ozsevik S
- KMID: 2349334
- J Adv Prosthodont.
- 2016 Aug;8(4):267-274.
- doi: 10.4047/jap.2016.8.4.267
PURPOSE: This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). MATERIALS AND METHODS: Partially... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of repeated bonding on the shear bond strength of different resin cements to enamel and dentin
-
Bulut AC, Atsü SS
- KMID: 2368213
- J Adv Prosthodont.
- 2017 Feb;9(1):57-66.
- doi: 10.4047/jap.2017.9.1.57
PURPOSE: Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of various bleaching treatments on shear bond strength of different universal adhesives and application modes
-
Oz FD, Kutuk ZB
- KMID: 2416520
- Restor Dent Endod.
- 2018 May;43(2):e20.
- doi: 10.5395/rde.2018.43.e20
OBJECTIVES: The aim of this in vitro study was to evaluate the bond strength of 2 universal adhesives used in different application modes to bleached enamel. MATERIALS AND METHODS: Extracted 160... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface anodization on stability of orthodontic microimplant
-
Karmarker , Yu W, Kyung HM
- KMID: 2393238
- Korean J Orthod.
- 2012 Feb;42(1):4-10.
OBJECTIVE: To determine the effect of surface anodization on the interfacial strength between an orthodontic microimplant (MI) and the rabbit tibial bone, particularly in the initial phase after placement. METHODS: A... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface treatment methods on the shear bond strength of resin cement to zirconia ceramic
-
Lee HJ, Ryu JJ, Shin SW, Suh KW
- KMID: 2195629
- J Korean Acad Prosthodont.
- 2007 Dec;45(6):743-752.
STATEMENT OF PROBLEM: The aims of the study were to evaluate the effect of current surface conditioning methods on the bond strength of a resin composite luting cement bonded to... -
- CITED
-
- Close
- SHARE
-
- Close
- Bond strength of self-adhesive resin cements to composite submitted to different surface pretreatments
-
dos Santos VH, Griza S, de Moraes , Faria-e-Silva AL
- KMID: 2316864
- Restor Dent Endod.
- 2014 Feb;39(1):12-16.
OBJECTIVES: Extensively destroyed teeth are commonly restored with composite resin before cavity preparation for indirect restorations. The longevity of the restoration can be related to the proper bonding of the... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of silane activation on shear bond strength of fiber-reinforced composite post to resin cement
-
Kim HD, Lee JH, Ahn KM, Kim HS, Cha HS
- KMID: 2284748
- J Adv Prosthodont.
- 2013 May;5(2):104-109.
- doi: 10.4047/jap.2013.5.2.104
PURPOSE: Among the surface treatment methods suggested to enhance the adhesion of resin cement to fiber-reinforced composite posts, conflicting results have been obtained with silanization. In this study, the effects... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement
-
Pyun JH, Shin TB, Lee JH, Ahn KM, Kim TH, Cha HS
- KMID: 2176644
- J Adv Prosthodont.
- 2016 Apr;8(2):94-100.
- doi: 10.4047/jap.2016.8.2.94
PURPOSE: To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS: The specimens... -
- CITED
-
- Close
- SHARE
-
- Close
