- Comparison of implant stability measurements between a resonance frequency analysis device and a modified damping capacity analysis device: an in vitro study
-
Lee J, Pyo SW, Cho HJ, An JS, Lee JH, Koo KT, Lee YM
- KMID: 2470831
- J Periodontal Implant Sci.
- 2020 Feb;50(1):56-66.
- doi: 10.5051/jpis.2020.50.1.56
PURPOSE: A stability-measuring device that utilizes damping capacity analysis (DCA) has recently been introduced in the field of dental implantology. This study aimed to evaluate the sensitivity and reliability of... -
- CITED
-
- Close
- SHARE
-
- Close
- Histological analysis of explanted implant-bone interface: a case report
-
Kim DD, Kang DY, Cho IW, Song YG, Shin HS, Park JC
- KMID: 2470629
- J Dent Rehabil Appl Sci.
- 2019 Dec;35(4):235-243.
- doi: 10.14368/jdras.2019.35.4.235
Osseointegration has been reported to be a dynamic process in which the alveolar bone comes in direct contact with the implant. Various methods were tried to evaluate degree of osseointegration... -
- CITED
-
- Close
- SHARE
-
- Close
- Dentistry and otorhinolaryngology cooperative therapy of chronic maxillary sinusitis: Case series study
-
Yu HC, Yun PY, Chang NH, Kim YK
- KMID: 2470505
- Oral Biol Res.
- 2019 Dec;43(4):278-282.
- doi: 10.21851/obr.43.04.201912.278
For the maxillary sinus to normally function, the ventilation and drainage should be well maintained. The natural ostium of the maxillary sinus could be blocked owing to various reasons. In... -
- CITED
-
- Close
- SHARE
-
- Close
- Rehabilitation with implant-supported fixed dental prostheses using digital duplication technique on customized artificial tooth, interim denture and implant surgical template: A case report
-
Jeong DG, Oh KC, Shim JS, Park JM
- KMID: 2461147
- J Korean Acad Prosthodont.
- 2019 Oct;57(4):397-404.
- doi: 10.4047/jkap.2019.57.4.397
Bone and soft tissue conditions are important for successful implant treatment. But, the placement itself is also very important. Implants which is installed in the wrong position result in the... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of removal torque of dual-acid etched and single-acid etched implants in rabbit tibias
-
Kim JJ, Cho SA
- KMID: 2461139
- J Korean Acad Prosthodont.
- 2019 Oct;57(4):335-341.
- doi: 10.4047/jkap.2019.57.4.335
PURPOSE: Chemically strong-acids (HF and HCl/Hâ‚‚SOâ‚„) dual etching implant surfaces have higher strengths of osseointegration than machined implant surfaces. However, the dual acid treatment deteriorates the physical properties of the... -
- CITED
-
- Close
- SHARE
-
- Close
- Early implant failure: a retrospective analysis of contributing factors
-
Kang DY, Kim M, Lee SJ, Cho IW, Shin HS, Caballé-Serrano J, Park JC
- KMID: 2461019
- J Periodontal Implant Sci.
- 2019 Oct;49(5):287-298.
- doi: 10.5051/jpis.2019.49.5.287
PURPOSE: The aim of this retrospective study was to determine the prevalence of early implant failure using a single implant system and to identify the factors contributing to early implant... -
- CITED
-
- Close
- SHARE
-
- Close
- Proton pump inhibitor intake negatively affects the osseointegration of dental implants: a retrospective study
-
Altay MA, Sindel A, Özalp O, Yıldırımyan N, Kocabalkan B
- KMID: 2451320
- J Korean Assoc Oral Maxillofac Surg.
- 2019 Jun;45(3):135-140.
- doi: 10.5125/jkaoms.2019.45.3.135
OBJECTIVES: This study sought to investigate the association between the systemic intake of proton pump inhibitors (PPI) and the early failure of dental implants. MATERIALS AND METHODS: A retrospective cohort study... -
- CITED
-
- Close
- SHARE
-
- Close
- An experimental investigation of the effects of chronic stress on bone-to-implant contact
-
Dundar S, Bozoglan A, Yaman F, Kirtay M, Bulmus O, Sahin Aydinyurt H, Solmaz MY, Yanen C
- KMID: 2467152
- J Korean Assoc Oral Maxillofac Surg.
- 2019 Apr;45(2):91-96.
- doi: 10.5125/jkaoms.2019.45.2.91
OBJECTIVES: This study aimed to investigate the effects of chronic restraint stress on the osseointegration of titanium implants. MATERIALS AND METHODS: Twenty adult male Wistar albino rats were used in the... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of bioactivity and osseointegration for ti-6al-4v alloy implant modified by anodic oxidation and cyclic precalcification treatments
-
Jang YS, Kang JY, Lee KG, Lim CH, Lee MH, Bae TS
- KMID: 2448023
- Korean J Dent Mater.
- 2019 Mar;46(1):43-52.
- doi: 10.14815/kjdm.2019.46.1.43
The aim of this study was to examine the bioactivity and osseointegration of Ti-6Al-4V alloy implant which was modified by an anodic oxidation and a cyclic precalcification treatments. After blasting... -
- CITED
-
- Close
- SHARE
-
- Close
- Titanium Powder Coating Using Metal 3D Printing: A Novel Coating Technology for Cobalt-Chromium Alloy Implants
-
Kim SC, Jo WL, Kim YS, Kwon SY, Cho YS, Lim YW
- KMID: 2441251
- Tissue Eng Regen Med.
- 2019 Feb;16(1):11-18.
- doi: 10.1007/s13770-018-0168-0
BACKGROUND: Three-dimensional (3D) printing with a direct metal fabrication (DMF) technology has been innovatively introduced in the field of surface treatment of prostheses. The purpose of this study was to... -
- CITED
-
- Close
- SHARE
-
- Close
- Bone healing dynamics associated with 3 implants with different surfaces: histologic and histomorphometric analyses in dogs
-
Lee J, Yoo JM, Amara HB, Lee YM, Lim YJ, Kim H, Koo KT
- KMID: 2440175
- J Periodontal Implant Sci.
- 2019 Feb;49(1):25-38.
- doi: 10.5051/jpis.2019.49.1.25
PURPOSE: This study evaluated differences in bone healing and remodeling among 3 implants with different surfaces: sandblasting and large-grit acid etching (SLA; IS-III Active®), SLA with hydroxyapatite nanocoating (IS-III Bioactive®),... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the removal torque and a histomorphometric evaluation of the RBM treated implants with the RBM followed by laser treated implants: an experimental study in rabbits
-
Park EY, Sohn HO, Kim EK
- KMID: 2434098
- Yeungnam Univ J Med.
- 2019 Jan;36(1):43-49.
- doi: 10.12701/yujm.2019.00094
BACKGROUND: In the osseointegration of dental implants, the implant surface properties have been reported to be some of the most important critical factors. The effect of implant's surfaces created by... -
- CITED
-
- Close
- SHARE
-
- Close
- Relationship between cortical bone thickness and implant stability at the time of surgery and secondary stability after osseointegration measured using resonance frequency analysis
-
Tanaka K, Sailer I, Iwama R, Yamauchi K, Nogami S, Yoda N, Takahashi
- KMID: 2429864
- J Periodontal Implant Sci.
- 2018 Dec;48(6):360-372.
- doi: 10.5051/jpis.2018.48.6.360
PURPOSE: It has been suggested that resonance frequency analysis (RFA) can measure changes in the stability of dental implants during osseointegration. This retrospective study aimed to evaluate dental implant stability... -
- CITED
-
- Close
- SHARE
-
- Close
- Hydroxyapatite Nanorod-Modified Sand Blasted Titanium Disk for Endosseous Dental Implant Applications
-
Park SJ, Kim BS, Gupta KC, Lee DY, Kang IK
- KMID: 2422674
- Tissue Eng Regen Med.
- 2018 Oct;15(5):601-614.
- doi: 10.1007/s13770-018-0151-9
BACKGROUND: Sand blasted titanium (Ti) is commonly used in designing endosseous dental implants due to its biocompatibility and ability to form bonds with bone tissues. However, titanium implants do not... -
- CITED
-
- Close
- SHARE
-
- Close
- Retrospective radiographic and clinical analysis of implant survival placed after alveolar ridge preservation
-
Lee SJ, Jang H, Shin HS, Park JC, Song YG, Cho IW
- KMID: 2422635
- J Dent Rehabil Appl Sci.
- 2018 Sep;34(3):167-174.
- doi: 10.14368/jdras.2018.34.3.167
PURPOSE: The purpose of present study was to retrospectively analyze the survival rate of implant placed after alveolar ridge preservation by initial stability and radiographic measurements. MATERIALS AND METHODS: In total,... -
- CITED
-
- Close
- SHARE
-
- Close
- Surface morphology characterization of laser-induced titanium implants: lesson to enhance osseointegration process
-
Tavakoli J, Khosroshahi ME
- KMID: 2434892
- Biomed Eng Lett.
- 2018 Aug;8(3):249-257.
- doi: 10.1007/s13534-018-0063-6
The surface properties of implant are responsible to provide mechanical stability by creating an intimate bond between the bone and implant; hence, play a major role on osseointegration process. The... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of Implant Surface Coated with pH Buffering Agent on Early Osseointegration
-
Kang JH, Kim SK, Pae HC, Park JY, Cha JK, Choi SH
- KMID: 2437216
- J Korean Dent Sci.
- 2018 Jun;11(1):5-13.
- doi: 10.5856/JKDS.2018.11.1.5
PURPOSE: Surface treatment with pH buffering agent has been developed to achieve higher and faster osseointegration. The aim of this study was to evaluate its influence by measuring removal torque... -
- CITED
-
- Close
- SHARE
-
- Close
- Tissue integration of zirconia and titanium implants with and without buccal dehiscence defects
-
Lim HC, Jung RE, Hämmerle , Kim MJ, Paeng KW, Jung UW, Thoma DS
- KMID: 2414931
- J Periodontal Implant Sci.
- 2018 Jun;48(3):182-192.
- doi: 10.5051/jpis.2018.48.3.182
PURPOSE: The purpose of the present study was to validate an experimental model for assessing tissue integration of titanium and zirconia implants with and without buccal dehiscence defects. METHODS: In 3... -
- CITED
-
- Close
- SHARE
-
- Close
- Osteogenic Nanofibrous Coated Titanium Implant Results in Enhanced Osseointegration: In Vivo Preliminary Study in a Rabbit Model
-
Das S, Gurav S, Soni V, Ingle A, Mohanty BS, Chaudhari , Bendale K, Dholam K, Bellare JR
- KMID: 2410517
- Tissue Eng Regen Med.
- 2018 Apr;15(2):231-247.
- doi: 10.1007/s13770-017-0106-6
A titanium implant surface when coated with biodegradable, highly porous, osteogenic nanofibrous coating has shown enhanced intrinsic osteoinductive and osteoconductive properties. This coating mimics extracellular matrix resulting in differentiation of... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional finite element analysis according to the insertion depth of an immediately loaded implant in the anterior maxilla
-
Park CW, Kim SH, Yeo IS, Yoon HI, Han JS
- KMID: 2410113
- J Korean Acad Prosthodont.
- 2018 Apr;56(2):105-113.
- doi: 10.4047/jkap.2018.56.2.105
PURPOSE: The purpose of this study was to investigate the effects of the insertion depth of an immediately loaded implant on the stress distribution of the surrounding bone and the... -
- CITED
-
- Close
- SHARE
-
- Close
