- Effect of application methods of a self-etching primer adhesive system on enamel bond strength
-
Park JG, Cho KH, Cho YG
- KMID: 1986753
- J Korean Acad Conserv Dent.
- 2008 Mar;33(2):90-97.
- doi: 10.5395/JKACD.2008.33.2.090
The purpose of this study was to evaluate the effect of passive or active application of primer and coat times of bond on the shear bond strength when a self-etching... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study on the properties of filler-added methacrylate polymers
-
Park DW, Choi BB, Kwon KR
- KMID: 2321710
- J Korean Acad Prosthodont.
- 2003 Oct;41(5):606-616.
PURPOSE: The purpose of this study was to research the properties of some chemically cured methacrylate polymers such as MMA, HEMA, TEG-DMA, bis-GMA, GMA. MATERIAL AND METHOD: 5 kinds of... -
- CITED
-
- Close
- SHARE
-
- Close
- Microshear bond strength of a self-etching primer adhesive to enamel according to the type of bur
-
Jeong JH, Cho YG, Lee MS
- KMID: 2176599
- J Korean Acad Conserv Dent.
- 2011 Nov;36(6):477-482.
- doi: 10.5395/JKACD.2011.36.6.477
OBJECTIVES: The purpose of this study was to compare the microshear bond strength (uSBS) to enamel prepared with different burs and to determine what type of bur were chosen when... -
- CITED
-
- Close
- SHARE
-
- Close
- Real-time measurement of dentinal fluid flow during desensitizing agent application
-
Kim SY, Kim EJ, Lee IB
- KMID: 2176429
- J Korean Acad Conserv Dent.
- 2010 Sep;35(5):313-320.
- doi: 10.5395/JKACD.2010.35.5.313
OBJECTIVES: The aim of this study was to examine changes in the dentinal fluid flow (DFF) during desensitizing agent application and to compare permeability after application among the agents. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength between gold alloy and orthodontic metal bracket using light emitting diode curing light
-
Jung MH, Chung SH, Shon WJ
- KMID: 1975621
- Korean J Orthod.
- 2010 Feb;40(1):27-33.
- doi: 10.4041/kjod.2010.40.1.27
OBJECTIVE: The need to bond orthodontic brackets onto various alloys has increased because of the increasing demand for adult orthodontic treatment. This study tried to evaluate the shear bond strength... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of metal primer and thermocycling on shear bonding strength between the orthodontic bracket and gold alloy
-
Lee YK, Cha JY, Yu HS, Hwang CJ
- KMID: 2400569
- Korean J Orthod.
- 2009 Oct;39(5):320-329.
OBJECTIVE: The aim of this study was to evaluate the effect of metal primers and thermocycling on shear bond strength between the orthodontic bracket and gold alloy. METHODS: For this study,... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of moisture and drying time on the bond strength of the one-step self-etching adhesive system
-
Lee Y, Park JW
- KMID: 1995655
- Restor Dent Endod.
- 2012 Aug;37(3):155-159.
- doi: 10.5395/rde.2012.37.3.155
OBJECTIVES: To investigate the effect of dentin moisture degree and air-drying time on dentin-bond strength of two different one-step self-etching adhesive systems. MATERIALS AND METHODS: Twenty-four human third molars were used... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the shear bond strength between Co-Cr denture base and relining materials
-
Lee NY, Kim DY, Lee YS, Park WH
- KMID: 2000278
- J Korean Acad Prosthodont.
- 2011 Jan;49(1):8-15.
- doi: 10.4047/jkap.2011.49.1.8
PURPOSE: This study evaluated the bonding strength of direct relining resin to Co-Cr denture base material according to surface treatment and immersion time. MATERIALS AND METHODS: In this study, Co-Cr alloy... -
- CITED
-
- Close
- SHARE
-
- Close
- Optimal combination of 3-component photoinitiation system to increase the degree of conversion of resin monomers
-
Kim CG, Moon HJ, Shin DH
- KMID: 1986694
- J Korean Acad Conserv Dent.
- 2011 Jul;36(4):313-323.
- doi: 10.5395/JKACD.2011.36.4.313
OBJECTIVES: This study investigated the optimal combination of 3-component photoinitiation system, consisting of CQ, p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), and 2-dimethylaminoethyl methacrylate (DMAEMA) to increase the degree of conversion of resin... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study on the dislodging force of magnetic attachment to the denture resin by magnetic design and fixing materials
-
Lee JH, Lee JH, Cho IH
- KMID: 2118757
- J Korean Acad Prosthodont.
- 2008 Jun;46(3):261-268.
STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases
-
Cilingir A, Bilhan H, Geckili O, Sulun T, Bozdag E, Sunbuloglu E
- KMID: 2176528
- J Adv Prosthodont.
- 2013 Nov;5(4):396-401.
- doi: 10.4047/jap.2013.5.4.396
PURPOSE: The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of 2% chlorhexidine application on microtensile bond strength of resin composite to dentin using one-step self-etch adhesives
-
Jang SH, Hur B, Kim HC, Kwon YH, Park JK
- KMID: 2176471
- J Korean Acad Conserv Dent.
- 2010 Nov;35(6):486-491.
- doi: 10.5395/JKACD.2010.35.6.486
OBJECTIVES: This study examined the effect of 2% chlorhexidine on the microTBS of a direct composite restoration using one-step self-etch adhesives on human dentin. MATERIALS AND METHODS: Twenty-four extracted permanent molars... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of cutting instruments on the dentin bond strength of a self-etch adhesive
-
Lee YG, Moon SR, Cho YG
- KMID: 2176272
- J Korean Acad Conserv Dent.
- 2010 Jan;35(1):13-19.
- doi: 10.5395/JKACD.2010.35.1.013
The purpose of this study was to compare the microshear bond strength of a self-etching primer adhesive to dentin prepared with different diamond points, carbide burs and SiC papers, and... -
- CITED
-
- Close
- SHARE
-
- Close
- Flexural properties of a light-cure and a self-cure denture base materials compared to conventional alternatives
-
Mumcu E, Cilingir A, Gencel B, Sulun T
- KMID: 2118122
- J Adv Prosthodont.
- 2011 Sep;3(3):136-139.
- doi: 10.4047/jap.2011.3.3.136
PURPOSE: A new light curing urethane dimethacrylate and a cold curing resin with simpler and faster laboratory procedures may have even improved flexural properties. This study investigated the 3-point flexural... -
- CITED
-
- Close
- SHARE
-
- Close
- Marginal microleakage of self-etching primer adhesives and a self-etching adhesive
-
Cho YG, Cho KC
- KMID: 1987306
- J Korean Acad Conserv Dent.
- 2002 Sep;27(5):493-501.
- doi: 10.5395/JKACD.2002.27.5.493
This study evaluated the microleakage performance of four self-etcing primer adhesives(Clearfil SE Bond, Clearfil Liner Bond 2, UniFil Bond, and FL Bond) and one self-etching adhesive(Prompt L-Pop). Class V cavity... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of a desensitizer on dentinal bond strength in cementation of composite resin inlay
-
Han SH, Cho YG
- KMID: 2176148
- J Korean Acad Conserv Dent.
- 2009 May;34(3):223-231.
- doi: 10.5395/JKACD.2009.34.3.223
The purpose of this study was to evaluate the effect of a desensitizer on dentinal bond strength in cementation of composite resin inlay. Fifty four molar teeth were exposed the... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of conventional and self-etching adhesive systems on bond strength of orthodontic attachments bonded to erupted and unerupted teeth
-
Nur M, Uysal T, Yesilyurt , Bayram M
- KMID: 1975607
- Korean J Orthod.
- 2010 Aug;40(4):267-275.
- doi: 10.4041/kjod.2010.40.4.267
OBJECTIVE: The aim of this study was to evaluate and compare the shear bond strength (SBS) and failure-mode of orthodontic buttons bonded to erupted and unerupted teeth with conventional and... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of polymer-based temporary crown and fixed partial denture materials by diametral tensile strength
-
Ha SR, Yang JH, Lee JB, Han JS, Kim SH
- KMID: 1975172
- J Adv Prosthodont.
- 2010 Mar;2(1):14-17.
- doi: 10.4047/jap.2010.2.1.14
PURPOSE: The purpose of this study was to investigate the diametral tensile strength of polymer-based temporary crown and fixed partial denture (FPD) materials, and the change of the diametral tensile... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of adhesive hydrophobicity on microtensile bond strength of low-shrinkage silorane resin to dentin
-
Cho SY, Kang HY, Kim KA, Yu MK, Lee KW
- KMID: 1986690
- J Korean Acad Conserv Dent.
- 2011 Jul;36(4):280-289.
- doi: 10.5395/JKACD.2011.36.4.280
OBJECTIVES: The purpose of this study was to evaluate microTBS (microtensile bond strength) of current dentin bonding adhesives which have different hydrophobicity with low-shrinkage silorane resin. MATERIALS AND METHODS: Thirty-six human... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of the strength and wetting characteristics of Bis-GMA/TEGDMA-based adhesives on the bond strength to dentin
-
Park ES, Kim CK, Bae JH, Cho BH
- KMID: 2251819
- J Korean Acad Conserv Dent.
- 2011 Mar;36(2):139-148.
- doi: 10.5395/JKACD.2011.36.2.139
OBJECTIVES: This study investigated the effect of the strength and wetting characteristics of adhesives on the bond strength to dentin. The experimental adhesives containing various ratios of hydrophobic, low-viscosity Bis-M-GMA,... -
- CITED
-
- Close
- SHARE
-
- Close
