J Adv Prosthodont.  2023 Apr;15(2):63-71. 10.4047/jap.2023.15.2.63.

Effect of hemispherical dimples at titanium implant abutments for the retention of cemented crowns

• Choi JH
• Heo SJ
• Koak JY
• Kim SK
• Park JM
• Ahn JS

• KMID: 2541803
• DOI: http://doi.org/10.4047/jap.2023.15.2.63

Abstract

PURPOSE
. The aim of this study was to assess the effect of hemispherical dimple structures on the retention of cobalt–chromium (Co–Cr) crowns cemented to titanium abutments, with different heights and numbers of dimples on the axial walls.
MATERIALS AND METHODS
. 3.0-mm and 6.0-mm abutments (N = 180) and Co-Cr crowns were prepared. The experimental groups were divided into two and four dimple groups. The crowns were cemented by TempBond and PANAVIA F 2.0 cements. The retention forces were measured after thermal treatments. A twoway Analysis of Variance (ANOVA) and post-hoc Tukey HSD test were conducted to analyze change in retention forces by use of dimples between groups, as well as t test for the effect of abutment height change (α = .05).
RESULTS
. Results of the two-way ANOVA showed a statistically significant difference in retention force due to the use of dimples, regardless of the types of cements used (P < .001). A significantly higher mean retention forces were observed in the groups with dimples than in the control group, using the post hoc Tukey HSD test (P < .001).
Results
of t test displayed a statistically significant increase in the retention force with 6.0-mm abutments compared with 3.0-mm abutments (P < .001). The groups without dimples revealed adhesive failure of cements, while the groups with dimples showed mixed failure of cements.
CONCLUSION
. Use of hemispherical dimples was effective for increasing retention forces of cemented crowns.

Keyword

Dental implant; Implant prosthesis; Implant abutment; Retentive force