Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

9 results
Display

Comparison of three-dimensional digital technique with two-dimensional replica method for measuring marginal and internal fit of full coverage restorations

Hasanzade M, Koulivand S, Moslemian N, Alikhasi M

PURPOSE. This study compared digital (reference point matching) and replica methods for measuring marginal and internal fit of full coverage restorations. MATERIALS AND METHODS. A maxillary left first molar typodent...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of repetitive firing on passive fit of metal substructure produced by the laser sintering in implant-supported fixed prosthesis

Altintas MA, Akin H

PURPOSE. The aim of the present study was to investigate the passive fit of metal substructure after repetitive firing processes in implant-supposed prosthesis. MATERIALS AND METHODS. Five implants (4 mm...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The biocompatibility and mechanical properties of plasma sprayed zirconia coated abutment

Huang Z, Wang Z, Yin K, Li C, Guo M, Lan J

PURPOSE. The aim of this study was to evaluate the clinical performance and reliability of plasma sprayed nanostructured zirconia (NSZ) coating. MATERIALS AND METHODS. This study consisted of three areas...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of surface finishing treatments on the color stability of CAD/CAM materials

Ozen F, Demirkol N, Oz OP

PURPOSE. The aim of this study was to evaluate the effect of different surface finishing processes on the color stabilities of lithium disilicate glass-ceramics, zirconia-reinforced lithium silicate ceramics, and resin...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of the repair capacities and color stabilities of a resin nanoceramic and hybrid CAD/CAM blocks

Bahadır HS, Bayraktar Y

PURPOSE. This study evaluated the color stabilities of two computer-aided design and computer-aided manufacturing (CAD/CAM) blocks and a nanofill composite resin and the microtensile bond strength (μTBS) between the materials....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Repair bond strength of resin composite to three aged CAD/CAM blocks using different repair systems

Gul P, Altınok-Uygun L

PURPOSE. The purpose of this study is to evaluate the repair bond strength of a nanohybrid resin composite to three CAD/CAM blocks using different intraoral ceramic repair systems. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of marginal discrepancy in metal frameworks fabricated by sintering-based computer-aided manufacturing methods

Kaleli N, Ural , Us Y

PURPOSE. The aim of this in vitro study was to evaluate the effect of sintering procedures on marginal discrepancies of fixed partial metal frameworks fabricated using different sintering-based computer-aided design...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of corrosion resistance of Co-Cr alloys fabricated with different metal laser sintering systems

Tuna SH, Karaca E, Aslan , Pekkan G, Pekmez N

PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of the improperly scanned scan body images on the accuracy of virtual implant positioning in computer-aided design software

Park SW, Choi YD, Lee DH

PURPOSE. The aim of this study was to examine the importance of the defect-free scanning of a scan body by assessing the accuracy of virtual implant positioning in computer-aided design...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2021 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr