- Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot
-
Choi KH, Son K, Lee DH, Lee KB
- KMID: 2422875
- J Adv Prosthodont.
- 2018 Oct;10(5):381-387.
- doi: 10.4047/jap.2018.10.5.381
PURPOSE: Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of liners and primers on tensile bond strength between zirconia and resin-based luting agent
-
Jo EH, Huh YH, Ko KH, Park CJ, Cho LR
- KMID: 2422874
- J Adv Prosthodont.
- 2018 Oct;10(5):374-380.
- doi: 10.4047/jap.2018.10.5.374
PURPOSE: The effect of silica-based glass-ceramic liners on the tensile bond strength between zirconia and resin-based luting agent was evaluated and compared with the effect of 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of relining materials on the flexural strength of relined thermoplastic denture base resins
-
Sun Y, Song SY, Lee KS, Park JH, Ryu JJ, Lee JY
- KMID: 2422872
- J Adv Prosthodont.
- 2018 Oct;10(5):361-366.
- doi: 10.4047/jap.2018.10.5.361
PURPOSE: The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS: For shear bond... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of luting cements to fixed superstructure metal surfaces under various seating forces
-
Ozer F, Pak-Tunc E, Dagli NE, Ramachandran D, Sen D, Blatz MB
- KMID: 2422869
- J Adv Prosthodont.
- 2018 Oct;10(5):340-346.
- doi: 10.4047/jap.2018.10.5.340
PURPOSE: In this study, the shear bond strengths (SBS) of luting cements to fixed superstructure metal surfaces under various seating forces were investigated. MATERIALS AND METHODS: Seven different cements [Polycarboxylate (PCC),... -
- CITED
-
- Close
- SHARE
-
- Close
- Digital evaluation of axial displacement by implant-abutment connection type: An in vitro study
-
Kim SJ, Son K, Lee KB
- KMID: 2422876
- J Adv Prosthodont.
- 2018 Oct;10(5):388-394.
- doi: 10.4047/jap.2018.10.5.388
PURPOSE: To measure axial displacement of different implant-abutment connection types and materials during screw tightening at the recommended torque by using a contact scanner for two-dimensional (2D) and three-dimensional (3D)... -
- CITED
-
- Close
- SHARE
-
- Close
- Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique
-
Kang SY, Park JH, Kim JH, Kim WC
- KMID: 2422871
- J Adv Prosthodont.
- 2018 Oct;10(5):354-360.
- doi: 10.4047/jap.2018.10.5.354
PURPOSE: To compare and analyze trueness and precision of provisional crowns made using stereolithography apparatus and subtractive technology. MATERIALS AND METHODS: Digital impressions were made using a master model and an... -
- CITED
-
- Close
- SHARE
-
- Close
- Trueness and precision of scanning abutment impressions and stone models according to dental CAD/CAM evaluation standards
-
Jeon JH, Hwang SS, Kim JH, Kim WC
- KMID: 2422868
- J Adv Prosthodont.
- 2018 Oct;10(5):335-339.
- doi: 10.4047/jap.2018.10.5.335
PURPOSE: The purpose of the present study was to compare scanning trueness and precision between an abutment impression and a stone model according to dental computer-aided design/computer-aided manufacturing (CAD/CAM) evaluation... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of marginal discrepancy of pressable ceramic veneer fabricated using CAD/CAM system: Additive and subtractive manufacturing
-
Kang SY, Lee HN, Kim JH, Kim WC
- KMID: 2422870
- J Adv Prosthodont.
- 2018 Oct;10(5):347-353.
- doi: 10.4047/jap.2018.10.5.347
PURPOSE: The purpose of this study was to evaluate the marginal discrepancy of heat-pressed ceramic veneers manufactured using a CAD/CAM system. MATERIALS AND METHODS: The ceramic veneers for the abutment of... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the marginal and internal fit of a single crown fabricated based on a three-dimensional printed model
-
Jang Y, Sim JY, Park JK, Kim WC, Kim HY, Kim JH
- KMID: 2422873
- J Adv Prosthodont.
- 2018 Oct;10(5):367-373.
- doi: 10.4047/jap.2018.10.5.367
PURPOSE: To evaluate the fit of a crown produced based on a 3D printed model and to investigate its clinical applicability. MATERIALS AND METHODS: A master die was fabricated with epoxy.... -
- CITED
-
- Close
- SHARE
-
- Close
