Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

10 results
Display

A comparison of the accuracy of intraoral scanners using an intraoral environment simulator

Park HN, Lim YJ, Yi WJ, Han JS, Lee SP

PURPOSE: The aim of this study was to design an intraoral environment simulator and to assess the accuracy of two intraoral scanners using the simulator. MATERIALS AND METHODS: A box-shaped intraoral...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of abutment diameter, luting agent type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments

Safari S, Hosseini Ghavam F, Amini P, Yaghmaei K

PURPOSE: The aim of this study was to evaluate the effects of abutment diameter, cement type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative color and surface parameters of current esthetic restorative CAD/CAM materials

Egilmez F, Ergun G, Cekic-Nagas I, Vallittu P, Lassila LV

PURPOSE: The purpose of this study was to derive and compare the inherent color (hue angle, chroma), translucency (TP(SCI)), surface gloss (ΔE* SCE-SCI), and surface roughness (Ra) amongst selected shades and...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of nano alumina coating on the flexural bond strength between zirconia and resin cement

Akay C, Tanış MC, Mumcu E, Kılıçarslan MA, Şen M

PURPOSE: The purpose of this in vitro study is to examine the effects of a nano-structured alumina coating on the adhesion between resin cements and zirconia ceramics using a four-point...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of removal torques between laser-etched and modified sandblasted acid-etched Ti implant surfaces in rabbit tibias

Park KS, Al Awamleh AGI, Cho SA

PURPOSE: The purpose of this study was to analyze the effects of two different implant surface treatments on initial bone connection by comparing the Removal Torque Values (RTQs) at 7...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Survival rate of modern all-ceramic FPDs during an observation period from 2011 to 2016

Pott PC, Eisenburger M, Stiesch M

PURPOSE: In literature, many studies compare survival rates of different types of FPDs. Most of them compared restorations, which originated from one university, but from different clinicians. Data about restoration...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Metal-ceramic bond strength between a feldspathic porcelain and a Co-Cr alloy fabricated with Direct Metal Laser Sintering technique

Dimitriadis K, Spyropoulos K, Papadopoulos T

PURPOSE: The aim of the present study was to record the metal-ceramic bond strength of a feldspathic dental porcelain and a Co-Cr alloy, using the Direct Metal Laser Sintering technique...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of glazing and aging on the surface properties of CAD/CAM resin blocks

Tekçe N, Fidan S, Tuncer S, Kara D, Demirci M

PURPOSE: To investigate the effect of accelerated aging on surface properties of glazed CAD/CAM resin blocks using a 2D surface profilometer and a 3D non-contact optical profilometer. MATERIALS AND METHODS: Three...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Fracture resistance of implant- supported monolithic crowns cemented to zirconia hybrid-abutments: zirconia-based crowns vs. lithium disilicate crowns

Elshiyab S, Nawafleh N, Öchsner A, George R

PURPOSE: The aim of this in vitro study was to investigate the fracture resistance under chewing simulation of implant-supported posterior restorations (crowns cemented to hybrid-abutments) made of different all-ceramic materials. MATERIALS...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy and reproducibility of 3D digital tooth preparations made by gypsum materials of various colors

Tan FB, Wang C, Dai HW, Fan YB, Song JL

PURPOSE: The study aimed to identify the accuracy and reproducibility of preparations made by gypsum materials of various colors using quantitative and semi-quantitative three-dimensional (3D) approach. MATERIALS AND METHODS: A titanium...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr