- Use of polyaryletherketone (PAEK) based polymer for implant-supported telescopic overdenture: A case report
-
Park C, Jun DJ, Park SW, Lim HP
- KMID: 2368215
- J Adv Prosthodont.
- 2017 Feb;9(1):74-76.
- doi: 10.4047/jap.2017.9.1.74
Although many prosthetic materials exist for fabrication of implant-supported telescopic overdentures, available materials have not been thoroughly evaluated from a functional standpoint. This case report describes the use of polyaryletherketone... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the fit of cast gold crowns fabricated from the digital and the conventional impression techniques
-
Yun MJ, Jeon YC, Jeong CM, Huh JB
- KMID: 2368206
- J Adv Prosthodont.
- 2017 Feb;9(1):1-13.
- doi: 10.4047/jap.2017.9.1.1
PURPOSE: The purpose of this study was to compare the fit of cast gold crowns fabricated from the conventional and the digital impression technique. MATERIALS AND METHODS: Artificial tooth in a... -
- CITED
-
- Close
- SHARE
-
- Close
- The influence of the number and the type of magnetic attachment on the retention of mandibular mini implant overdenture
-
Lee E, Shin SY
- KMID: 2368207
- J Adv Prosthodont.
- 2017 Feb;9(1):14-21.
- doi: 10.4047/jap.2017.9.1.14
PURPOSE: The aim of this study was to compare the retention of mini implant overdenture by the number, the type of magnetic attachment, and the directions of applied dislodging force. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of repeated bonding on the shear bond strength of different resin cements to enamel and dentin
-
Bulut AC, Atsü SS
- KMID: 2368213
- J Adv Prosthodont.
- 2017 Feb;9(1):57-66.
- doi: 10.4047/jap.2017.9.1.57
PURPOSE: Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the bond strength of ceramics to Co-Cr alloys made by casting and selective laser melting
-
Lawaf S, Nasermostofi S, Afradeh M, Azizi A
- KMID: 2368212
- J Adv Prosthodont.
- 2017 Feb;9(1):52-56.
- doi: 10.4047/jap.2017.9.1.52
PURPOSE: Considering the importance of metal-ceramic bond, the present study aimed to compare the bond strength of ceramics to cobalt-chrome (Co-Cr) alloys made by casting and selective laser melting (SLM). MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional finite element analysis of platform switched implant
-
Moon SY, Lim YJ, Kim MJ, Kwon HB
- KMID: 2368209
- J Adv Prosthodont.
- 2017 Feb;9(1):31-37.
- doi: 10.4047/jap.2017.9.1.31
PURPOSE: The purpose of this study was to analyze the influence of the platform switching concept on an implant system and peri-implant bone using three-dimensional finite element analysis. MATERIALS AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- Microtensile bond strength of repaired indirect resin composite
-
Visuttiwattanakorn P, Suputtamongkol K, Angkoonsit D, Kaewthong , Charoonanan P
- KMID: 2368210
- J Adv Prosthodont.
- 2017 Feb;9(1):38-44.
- doi: 10.4047/jap.2017.9.1.38
PURPOSE: The objective of this study was to investigate the effect of surface treatments on microtensile bond strengths (MTBSs) of two types of indirect resin composites bonded to a conventional... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of coloring liquid dipping time on the fracture load and color of zirconia ceramics
-
Orhun E
- KMID: 2368214
- J Adv Prosthodont.
- 2017 Feb;9(1):67-73.
- doi: 10.4047/jap.2017.9.1.67
PURPOSE: The aims of the study were to evaluate the fracture load of zirconia core material after dipping in coloring liquid at different time intervals and to compare the color... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the fracture resistances of glass fiber mesh- and metal mesh-reinforced maxillary complete denture under dynamic fatigue loading
-
Im SM, Huh YH, Cho LR, Park CJ
- KMID: 2368208
- J Adv Prosthodont.
- 2017 Feb;9(1):22-30.
- doi: 10.4047/jap.2017.9.1.22
PURPOSE: The aim of this study was to investigate the effect of reinforcing materials on the fracture resistances of glass fiber mesh- and Cr–Co metal mesh-reinforced maxillary complete dentures under... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of different lateral occlusion schemes on peri-implant strain: A laboratory study
-
Lo J, Abduo J, Palamara J
- KMID: 2368211
- J Adv Prosthodont.
- 2017 Feb;9(1):45-51.
- doi: 10.4047/jap.2017.9.1.45
PURPOSE: This study aims to investigate the effects of four different lateral occlusion schemes and different excursions on peri-implant strains of a maxillary canine implant. MATERIALS AND METHODS: Four metal crowns... -
- CITED
-
- Close
- SHARE
-
- Close
