- The biofilm removal effect of MnOâ‚‚-diatom microbubbler from the dental prosthetic surfaces: In vitro study
-
Lee EH, Seo Y, Kwon HB, Yim YJ, Kong H, Kim MJ
- KMID: 2469916
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):14-22.
- doi: 10.4047/jkap.2020.58.1.14
PURPOSE: The aim of this study is to evaluate the effectiveness of MnOâ‚‚-diatom microbubbler (DM) on the surface of prosthetic materials as a mouthwash by comparing the biofilm removal effect... -
- CITED
-
- Close
- SHARE
-
- Close
- Bone and tissue reaction of porous nickel-titanium alloy implant for dental implants in rabbits
-
Min GH, Lee KH, Sung SJ, Lee WP, Yu SJ, Kim BO
- KMID: 2470504
- Oral Biol Res.
- 2019 Dec;43(4):269-277.
- doi: 10.21851/obr.43.04.201912.269
Porous nickel–titanium (Ni-Ti) alloy implants have been previously introduced, and many studies have been performed. Porous Ni-Ti alloys have excellent properties for use in the dental field. Thus, the use... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of silane and alkali treatment on the shear bond strength between two Ni-Cr alloys and acrylic resin
-
Park1 KS, Kwon TY
- KMID: 2470304
- Korean J Dent Mater.
- 2019 Dec;46(4):243-252.
- doi: 10.14815/kjdm.2019.46.4.243
Sufficient bonding between the framework of the cast alloy and the denture base resin is essential for the clinical success of removable partial dentures. In this study, we investigated whether... -
- CITED
-
- Close
- SHARE
-
- Close
- Changes in hardness and microstructure of a Pd-Ag-In-Ga-based metal-ceramic alloy during porcelain firing simulation and subsequent cooling
-
Shin HJ, Kwon YH, Seol HJ
- KMID: 2470303
- Korean J Dent Mater.
- 2019 Dec;46(4):229-242.
- doi: 10.14815/kjdm.2019.46.4.229
In this experiment, the alloy having the composition of 49.5Pd-40Ag-9In-1Ga (wt.%) was used to find the most effective cooling rate for the hardening of alloy during porcelain firing simulation. In... -
- CITED
-
- Close
- SHARE
-
- Close
- Shape memory alloy actuation of non-bonded piezo sensor configuration for bone diagnosis and impedance based analysis
-
Srivastava S, Bhalla S, Madan A
- KMID: 2470038
- Biomed Eng Lett.
- 2019 Nov;9(4):435-447.
- doi: 10.1007/s13534-019-00128-6
In the recent years, there has been a growing interest in research community towards the application of smart materials for bio-medical structural health monitoring. Amongst the smart materials, directly bonded... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional analysis of tooth movement in Class II malocclusion treatment using arch wire with continuous tip-back bends and intermaxillary elastics
-
Lee JY, Choi SK, Kwon TH, Kang KH, Kim SC
- KMID: 2464198
- Korean J Orthod.
- 2019 Nov;49(6):349-359.
- doi: 10.4041/kjod.2019.49.6.349
OBJECTIVE: The aim of this study was to analyze three-dimensional (3D) changes in maxillary dentition in Class II malocclusion treatment using arch wire with continuous tip-back bends or compensating curve,... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative clinical study of the marginal discrepancy of fixed dental prosthesis fabricated by the milling-sintering method using a presintered alloy
-
Kim M, Kim J, Mai HN, Kwon TY, Choi YD, Lee CH, Lee DH
- KMID: 2462111
- J Adv Prosthodont.
- 2019 Oct;11(5):280-285.
- doi: 10.4047/jap.2019.11.5.280
PURPOSE: The present study was designed to examine the clinical fit of fixed dental prosthesis fabricated by the milling-sintering method using a presintered cobalt-chromium alloy. MATERIALS AND METHODS: Two single metal-ceramic crowns... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of Mechanical Properties of Milled and Casted Cobalt-Chromium Alloys Using Three-point Bending Test
-
Hong JK, Kim SK, Heo SJ, Koak JY, Ahn JS
- KMID: 2465787
- Implantology.
- 2019 Sep;23(3):162-168.
- doi: 10.32542/implantology.2019013
PURPOSE: The objective of this study was to investigate the mechanical properties of Cobalt-Chromium (Co-Cr) alloys made by conventional casting method and Computer-Aided Design/Computer–Aided Manufacturing (CAD-CAM) milling method. MATERIAL AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- Platelet-Rich Plasma Pretreatment on Grit-Blasted Titanium Alloy for Enhanced Osteogenic Differentiation of Human Adipose-Derived Stem Cells
-
Hong SH, Nam J, Kim HJ, Yoo JJ
- KMID: 2462567
- Clin Orthop Surg.
- 2019 Sep;11(3):361-368.
- doi: 10.4055/cios.2019.11.3.361
BACKGROUND: Adequate bone formation around titanium alloy implants is integral to successful implantation surgery. Stem cell-coated implants may accelerate peri-implant bone formation. This study investigates the effect of platelet-rich plasma... -
- CITED
-
- Close
- SHARE
-
- Close
- 3D-Printed Prosthesis Replacement for Limb Salvage after Radical Resection of an Ameloblastoma in the Tibia with 1 Year of Follow Up: A Case Report
-
Feng D, He J, Zhang C, Wang L, Gu X, Guo Y
- KMID: 2457485
- Yonsei Med J.
- 2019 Sep;60(9):882-886.
- doi: 10.3349/ymj.2019.60.9.882
Ameloblastoma in the tibia is rare. Limb reconstruction after tumor resection is challenging in terms of selection of the operative method. Here, we report a case of radical resection of... -
- CITED
-
- Close
- SHARE
-
- Close
- Biodegradable Magnesium Alloy Stents as a Treatment for Vein Graft Restenosis
-
Li Y, Wang L, Chen S, Yu D, Sun W, Xin S
- KMID: 2443246
- Yonsei Med J.
- 2019 May;60(5):429-439.
- doi: 10.3349/ymj.2019.60.5.429
PURPOSE: To explore the effects of biodegradable magnesium alloy stents (BMAS) on remodeling of vein graft (VG) anastomotic restenosis. MATERIALS AND METHODS: To establish a VG restenosis model, seventy two New... -
- CITED
-
- Close
- SHARE
-
- Close
- Correction of Single Thoracic Adolescent Idiopathic Scoliosis Using Pedicle Screw Instrumentation: Comparison of Stainless Steel to Titanium Alloy Instruments
-
Kim SS, Lim DJ, Kim JH, Choi BW, Kim HY, Lee JS
- KMID: 2444779
- J Korean Orthop Assoc.
- 2019 Apr;54(2):141-149.
- doi: 10.4055/jkoa.2019.54.2.141
PURPOSE: To compare the results of two different instruments made of stainless steel and titanium alloy for correction of single thoracic adolescent idiopathic scoliosis (AIS) using pedicle screw instrumentation. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Inhibition of Osteoclast differentiation based on precipitation time of titanium surfaces immersed in modified simulated body fluid
-
Chang HM, Heo SJ, Kim SK, Koak JY
- KMID: 2444183
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):142-149.
- doi: 10.4047/jkap.2019.57.2.142
PURPOSE: The purpose of this study is to investigate the changes of osteoclast differentiation inhibition according to the period of precipitation when titanium disks were immersed in Modified simulated body... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of primers on the microtensile bond strength of resin cements to cobalt-chromium alloy
-
Jung HT, Campana SA, Park JH, Shin JH, Lee JY
- KMID: 2444177
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):95-101.
- doi: 10.4047/jkap.2019.57.2.95
PURPOSE: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (µTBS) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of bioactivity and osseointegration for ti-6al-4v alloy implant modified by anodic oxidation and cyclic precalcification treatments
-
Jang YS, Kang JY, Lee KG, Lim CH, Lee MH, Bae TS
- KMID: 2448023
- Korean J Dent Mater.
- 2019 Mar;46(1):43-52.
- doi: 10.14815/kjdm.2019.46.1.43
The aim of this study was to examine the bioactivity and osseointegration of Ti-6Al-4V alloy implant which was modified by an anodic oxidation and a cyclic precalcification treatments. After blasting... -
- CITED
-
- Close
- SHARE
-
- Close
- Additive manufacturing to veterinary practice: recovery of bony defects after the osteosarcoma resection in canines
-
Popov VV, Muller-Kamskii G, Katz-Demyanetz A, Kovalevsky A, Usov S, Trofimcow , Dzhenzhera G, Koptyug A
- KMID: 2448400
- Biomed Eng Lett.
- 2019 Feb;9(1):97-108.
- doi: 10.1007/s13534-018-00092-7
The paper outlines the achievements and challenges in the additive manufacturing (AM) application to veterinary practice. The state-of-the-art in AM application to the veterinary surgery is presented, with the focus... -
- CITED
-
- Close
- SHARE
-
- Close
- Titanium Powder Coating Using Metal 3D Printing: A Novel Coating Technology for Cobalt-Chromium Alloy Implants
-
Kim SC, Jo WL, Kim YS, Kwon SY, Cho YS, Lim YW
- KMID: 2441251
- Tissue Eng Regen Med.
- 2019 Feb;16(1):11-18.
- doi: 10.1007/s13770-018-0168-0
BACKGROUND: Three-dimensional (3D) printing with a direct metal fabrication (DMF) technology has been innovatively introduced in the field of surface treatment of prostheses. The purpose of this study was to... -
- CITED
-
- Close
- SHARE
-
- Close
- Corrosion Behaviors of Dental Implant Alloy after Micro-sized Surface Modification in Electrolytes Containing Mn Ion
-
Kang JI, Son MK, Choe HC
- KMID: 2437344
- J Korean Dent Sci.
- 2018 Dec;11(2):71-81.
- doi: 10.5856/JKDS.2018.11.2.71
PURPOSE: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after micro-sized surface modification in electrolytes containing Mn ion. MATERIALS AND METHODS: Mn-TiOâ‚‚ coatings were... -
- CITED
-
- Close
- SHARE
-
- Close
- Unwanted effects due to interactions between dental materials and magnetic resonance imaging: a review of the literature
-
Chockattu , Suryakant , Thakur S
- KMID: 2455570
- Restor Dent Endod.
- 2018 Nov;43(4):e39.
- doi: 10.5395/rde.2018.43.e39
Magnetic resonance imaging (MRI) is an advanced diagnostic tool used in both medicine and dentistry. Since it functions based on a strong uniform static magnetic field and radiofrequency pulses, it... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of luting cements to fixed superstructure metal surfaces under various seating forces
-
Ozer F, Pak-Tunc E, Dagli NE, Ramachandran D, Sen D, Blatz MB
- KMID: 2422869
- J Adv Prosthodont.
- 2018 Oct;10(5):340-346.
- doi: 10.4047/jap.2018.10.5.340
PURPOSE: In this study, the shear bond strengths (SBS) of luting cements to fixed superstructure metal surfaces under various seating forces were investigated. MATERIALS AND METHODS: Seven different cements [Polycarboxylate (PCC),... -
- CITED
-
- Close
- SHARE
-
- Close
