Korean J Nucl Med.
2000 Feb;34(1):82-93.
Investigation of the Signal Characteristics of a Small Gamma Camera System
Using NaI(Tl)-Position Sensitive Photomultiplier Tube
Abstract
-
PURPOSE: We characterized the signals obtained from the components of a small gamma camera
using NaI(Tl)-position sensitive photomultiplier tube (PSPMT) and optimized the parameters
employed in the modules of the system.
MATERIALS AND METHODS
The small gamma camera system consists of a NaI(Tl) crystal
(60x60x6 mm3) coupled with a Hamamatsu R3941 PSPMT, a resister chain circuit,
preamplifiers, nuclear instrument modules (NIMs), an analog to digital converter and a
personal computer for control and display. The PSPMT was read out using a resistive charge
division circuit which multiplexes the 34 cross wire anode channels into 4 signals
(X+, X-, Y+, Y-). Those signals were individually amplified by four preamplifiers and
then, shaped and amplified by amplifiers. The signals were discriminated and digitized
via triggering signal and used to localize the position of an event by applying the Anger
logic. The gamma camera control and image display was performed by a program implemented
using a graphic software.
RESULTS
The characteristics of signal and the parameters employed in each module of the
system were presented. The intrinsic sensitivity of the system was approximately 8x103
counts/sec/microcurie. The intrinsic energy resolution of the system was 18% FWHM at 140 keV.
The spatial resolution obtained using a line-slit mask and 99mTc point source were,
respectively, 2.2 and 2.3 mm FWHM in X and Y directions. Breast phantom containing 2~7 mm
diameter spheres was successfully imaged with a parallel hole collimator. The image displayed
accurate size and activity distribution over the imaging field of view.
CONCLUSION
We proposed a simple method for development of a small gamma camera and presented
the characteristics of the signals from the system and the optimized parameters used in the
modules of the small gamma camera.