- Effect of atmospheric plasma versus conventional surface treatments on the adhesion capability between self-adhesive resin cement and titanium surface
-
Seker E, Kilicarslan MA, Deniz ST, Mumcu E, Ozkan P
- KMID: 2284711
- J Adv Prosthodont.
- 2015 Jun;7(3):249-256.
- doi: 10.4047/jap.2015.7.3.249
PURPOSE: The aim of this study was to evaluate the effects of atmospheric plasma (APL) versus conventional surface treatments on the adhesion of self-adhesive resin cement to Ti-6Al-4V alloy. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of various veneering techniques on the marginal fit of zirconia copings
-
Torabi K, Vojdani M, Giti R, Taghva M, Pardis S
- KMID: 2284709
- J Adv Prosthodont.
- 2015 Jun;7(3):233-239.
- doi: 10.4047/jap.2015.7.3.233
PURPOSE: This study aimed to evaluate the fit of zirconia ceramics before and after veneering, using 3 different veneering processes (layering, press-over, and CAD-on techniques). MATERIALS AND METHODS: Thirty standardized zirconia... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of cement washout on loosening of abutment screws and vice versa in screw- and cement- retained implant-supported dental prosthesis
-
Kim SG, Chung CH, Son MK
- KMID: 2284706
- J Adv Prosthodont.
- 2015 Jun;7(3):207-213.
- doi: 10.4047/jap.2015.7.3.207
PURPOSE: The purpose of this study was to examine the abutment screw stability of screw- and cement-retained implant-supported dental prosthesis (SCP) after simulated cement washout as well as the stability... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation and comparison of the marginal adaptation of two different substructure materials
-
Karaman T, Ulku SZ, Zengingul , Guven S, Eratilla V, Sumer E
- KMID: 2284712
- J Adv Prosthodont.
- 2015 Jun;7(3):257-263.
- doi: 10.4047/jap.2015.7.3.257
PURPOSE: In this study, we aimed to evaluate the amount of marginal gap with two different substructure materials using identical margin preparations. MATERIALS AND METHODS: Twenty stainless steel models with a... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of IDS (immediate dentin sealing) on dentin bond strength under various thermocycling periods
-
Leesungbok R, Lee SM, Park SJ, Lee SW, Lee DY, Im BJ, Ahn SJ
- KMID: 2284708
- J Adv Prosthodont.
- 2015 Jun;7(3):224-232.
- doi: 10.4047/jap.2015.7.3.224
PURPOSE: The purpose of this study was to find out the effect of immediate dentin sealing (IDS) on bond strength of ceramic restoration under various thermocycling periods with DBA (dentin... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of preparation depths on the fracture load of customized zirconia abutments with titanium insert
-
Joo HS, Yang HS, Park SW, Kim HS, Yun KD, Ji MK, Lim HP
- KMID: 2284703
- J Adv Prosthodont.
- 2015 Jun;7(3):183-190.
- doi: 10.4047/jap.2015.7.3.183
PURPOSE: This study evaluated the fracture load of customized zirconia abutments with titanium insert according to preparation depths, with or without 5-year artificial aging. MATERIALS AND METHODS: Thirty-six identical lithium disilicate... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin
-
Su N, Yue L, Liao Y, Liu W, Zhang H, Li X, Wang H, Shen J
- KMID: 2284707
- J Adv Prosthodont.
- 2015 Jun;7(3):214-223.
- doi: 10.4047/jap.2015.7.3.214
PURPOSE: To measure the surface loss of dental restorative zirconia and the short-term bond strength between an indirect composite resin (ICR) and zirconia ceramic after various sandblasting processes. MATERIALS AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- Does matching relation exist between the length and the tilting angle of terminal implants in the all-on-four protocol? stress distributions by 3D finite element analysis
-
Li X, Cao Z, Qiu X, Tang Z, Gong L, Wang D
- KMID: 2284710
- J Adv Prosthodont.
- 2015 Jun;7(3):240-248.
- doi: 10.4047/jap.2015.7.3.240
PURPOSE: To explore whether there is matching relation between the length and the tilting angle of terminal implants in the All-on-Four protocol by studying the effects of different implant configurations... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-supported overdenture manufactured using CAD/CAM techniques to achieve horizontal path insertion between the primary and secondary structure: A clinical case report
-
Agustin-Panadero R, Penarrocha-Oltra D, Gomar-Vercher S, Ferreiroa , Penarrocha-Diago M
- KMID: 2284713
- J Adv Prosthodont.
- 2015 Jun;7(3):264-270.
- doi: 10.4047/jap.2015.7.3.264
This report describes the case of an edentulous patient with an atrophic maxilla and severe class III malocclusion. Prosthetic rehabilitation was performed using CAD/CAM techniques for manufacturing an implant-supported overdenture... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of marginal bone loss and patient satisfaction in single and double-implant assisted mandibular overdenture by immediate loading
-
Tavakolizadeh S, Vafaee F, Khoshhal M, Ebrahimzadeh Z
- KMID: 2284704
- J Adv Prosthodont.
- 2015 Jun;7(3):191-198.
- doi: 10.4047/jap.2015.7.3.191
PURPOSE: The purpose of this study was to compare the coronal bone level and patient satisfaction in 1-implant and 2-implant assisted mandibular overdentures. MATERIALS AND METHODS: Twenty patients who had maladaptive... -
- CITED
-
- Close
- SHARE
-
- Close
- Impact of surface roughness of gypsum materials on adaptation of zirconia cores
-
Kim KB, Kim JH, Kim SH
- KMID: 2284705
- J Adv Prosthodont.
- 2015 Jun;7(3):199-206.
- doi: 10.4047/jap.2015.7.3.199
PURPOSE: The present study investigated the influences of various gypsum materials on the precision of fit of CAD/CAM-fabricated prostheses and analyzed their correlation with surface roughness. MATERIALS AND METHODS: The master... -
- CITED
-
- Close
- SHARE
-
- Close
