- An experimental study on diameter increase of orthodontic wire by electroplating
-
Cho JH, Sung YE, Lee KH, Hwang HS
- KMID: 2271917
- Korean J Orthod.
- 2003 Apr;33(2):121-130.
The purpose of this study was to evaluate the possibile clinical application of electroplating to increase diameter of an orthodontic wire, through examining the change of physical properties. The diameter... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of the surface modifications and the use of washer on the reverse torque of the implant prosthetic gold retaining screw
-
Lee JH, Jang KS, Kim CW, Kim YS
- KMID: 2195850
- J Korean Acad Prosthodont.
- 2002 Jun;40(3):246-261.
The screw loosening is one of the complications that happen frequently in dental implant prostheses. The purpose of this study was to evaluate the changes of reverse/loosening (opening) torque of the... -
- CITED
-
- Close
- SHARE
-
- Close
- Change of physical properties after diameter increase by electroplating of orthodontic rectangular stainless steel wire
-
Lee JS, Lee KH, Hwang HS
- KMID: 2271918
- Korean J Orthod.
- 2003 Apr;33(2):131-140.
The purpose of this study was to evaluate clinical applications of electroplating method through investigation of the physical properties of orthodontic rectangular wires according to varying their cross section. For... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of cytotoxicity of electroplated stainless steel orthodontic wire
-
Lee GH, Cho JH, Lee KH, Hwang HS
- KMID: 2074791
- Korean J Orthod.
- 2005 Apr;35(2):127-136.
The purpose of this study was to examine the cytotoxicity of orthodontic wire which had an increased diameter through electroplating, and to evaluate its possible clinical applications. First, nickel plating... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study of electroplating and electroless plating for diameter increase of orthodontic wire
-
Kim JN, Cho JH, Sung YE, Lee KH, Hwang HS
- KMID: 1975949
- Korean J Orthod.
- 2006 Apr;36(2):145-152.
The purpose of this study was to evaluate electroless plating as a method of increasing the diameter of an orthodontic wire in comparison with eletroplating. After pretreatment plating of the... -
- CITED
-
- Close
- SHARE
-
- Close
- Dental Erosion in two Factories using Acids
-
Cheon YH, Kwon HK, Moon YH, Roh JH
- KMID: 2282139
- Korean J Prev Med.
- 1982 Oct;15(1):83-88.
Acid erosion of teeth was studied in two factories. The A was the textile factory possessing dyeing process using acids. The B was the metal product manufactof,ing factory possessing electroplating... -
- CITED
-
- Close
- SHARE
-
- Close
- A comprehensive review of techniques for biofunctionalization of titanium
-
Hanawa T
- KMID: 2094722
- J Periodontal Implant Sci.
- 2011 Dec;41(6):263-272.
- doi: 10.5051/jpis.2011.41.6.263
A number of surface modification techniques using immobilization of biofunctional molecules of Titanium (Ti) for dental implants as well as surface properties of Ti and Ti alloys have been developed.... -
- CITED
-
- Close
- SHARE
-
- Close
- Acute Ammonium Dichromate Poisoning: A Case Report
-
Choi DH, Joo MD, Jun DH, Choi WI, Lee DP
- KMID: 2331406
- J Korean Soc Emerg Med.
- 2004 Jun;15(3):201-204.
Soluble compounds of chromium are widely used in industrial processes, including printing, photography, pyrotechnics, dyeing, electroplating, aircraft, shipbuilding, and leather tanning. Exposure in industry is generally via the inhalation of... -
- CITED
-
- Close
- SHARE
-
- Close
- Assessment of Occupational Exposure to Cadmium in Korea
-
Kang SK, Hong JP, Kim KW, Jang JY, Chung HK, Chung KC
- KMID: 2074942
- Korean J Occup Environ Med.
- 1994 Sep;6(2):252-258.
Twenty-four factories registered at the Ministry of Labor as factories using or producing cadmium in 1991 were investigated to know the present state of occupational exposure to cadmium in 1992. Nine... -
- CITED
-
- Close
- SHARE
-
- Close
- A Case of Chemical Pneumonitis with Gastrointestinal Disturbance Caused by Nitric Acid Inhalation
-
Lee JH, Hwang JI, Han KH, Min JH, Park JS, Kim H, Lee SW, An JY, Kang JH
- KMID: 2333326
- J Korean Soc Emerg Med.
- 2013 Apr;24(2):254-257.
Nitric acid is a typical strong acid that is colorless, corrosive, and flammable. It is often used for industrial purposes, such as refining, metal cleaning, and electroplating. In Korea, some... -
- CITED
-
- Close
- SHARE
-
- Close
- A Case of Acute Respiratory Distress Syndrome Caused by Nitric Acid Inhalation
-
Kim DS, Yoon HE, Lee SJ, Kim YH, Song SH, Kim CH, Moon HS, Song JS, Park SH
- KMID: 2318759
- Tuberc Respir Dis.
- 2005 Dec;59(6):690-695.
Nitric acid is an oxidizing agent used in metal refining and cleaning, electroplating, and other industrial applications. Its accidental spillage generates oxides of nitrogen, including nitric oxide (NO) and... -
- CITED
-
- Close
- SHARE
-
- Close
- Characterization of Tetrodes Coated with Au Nanoparticles (AuNPs) and PEDOT and Their Application to Thalamic Neural Signal Detection in vivo
-
Lee D, Moon HC, Tran BT, Kwon DH, Kim YH, Jung SD, Joo JH, Park YS
- KMID: 2430114
- Exp Neurobiol.
- 2018 Dec;27(6):593-604.
- doi: 10.5607/en.2018.27.6.593
Tetrodes, consisting of four twisted micro-wires can simultaneously record the number of neurons in the brain. To improve the quality of neuronal activity detection, the tetrode tips should be modified... -
- CITED
-
- Close
- SHARE
-
- Close
- The Clinical use of Absorbable Plate and Screw in Mandibular Fracture
-
Byeon JH, Kim GH
- KMID: 1961935
- J Korean Cleft Palate-Craniofac Assoc.
- 2002 Oct;3(2):161-166.
Rigid fixation techniques with absorbable plates and screws are recently utilized for the repair of craniofacial skeletal injuries or congenital anomalies. But no domestic literature are presented in treatments of... -
- CITED
-
- Close
- SHARE
-
- Close
- The Study of High-functioning Electrodeposition Technology That Pearl-like Feeling Expressed for Medical Devices for Smart Health
-
Chang HG, Lee IB
- KMID: 2151762
- Prog Med Phys.
- 2015 Dec;26(4):273-279.
- doi: 10.14316/pmp.2015.26.4.273
Recently, medical devices for a smart health development and dissemination are becoming increasingly frequent use of devices and their's thermal stability, durability, the external splendors are required. Industrial demand for... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effect of Rigid Internal Fixation on Growth of the Mandibulofacial Bone in Growing Rabbits
-
Yang SY, Lee KC, Kang NH, Wee SS, Lee CK
- KMID: 2041193
- J Korean Soc Plast Reconstr Surg.
- 1999 Jan;26(1):118-132.
Craniofacial reconstructive procedures are frequently peformed with rigid fixation of the bone. During the period of active bone growth such manipulation may influence bone development. The purpose of this study... -
- CITED
-
- Close
- SHARE
-
- Close
- A Study of Working Environments and Workers Exposed to Chromium
-
Yu BC, Son BC, Jun JH, Han YS, Son HS, Lee CE, Jeong W
- KMID: 2282700
- Korean J Prev Med.
- 1994 Sep;27(3):517-530.
For the purpose of providing the basic data for health management of workers who are exposed to chromium and for improving the quality of working environment, the authors evaluated blood... -
- CITED
-
- Close
- SHARE
-
- Close
