- The effect of repeated bonding on the shear bond strength of different resin cements to enamel and dentin
-
Bulut AC, Atsü SS
- KMID: 2368213
- J Adv Prosthodont.
- 2017 Feb;9(1):57-66.
- doi: 10.4047/jap.2017.9.1.57
PURPOSE: Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths... -
- CITED
-
- Close
- SHARE
-
- Close
- Development of anticariogenic composite resin
-
Park JW
- KMID: 2176289
- J Korean Acad Conserv Dent.
- 2010 Mar;35(2):65-68.
- doi: 10.5395/JKACD.2010.35.2.065
Due to the improvement of the composite resin and esthetic desire of the patient, amalgam restoration has been replaced by composite resin. However, still there are many unsolved problems, for... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of desensitizing agents, bonding resin and tooth brushing on dentin permeability, in vitro
-
Hong SW, Park NJ, Park YB, Lee KW
- KMID: 2195419
- J Korean Acad Prosthodont.
- 2014 Jul;52(3):165-176.
- doi: 10.4047/jkap.2014.52.3.165
PURPOSE: The effects of desensitizing agent are often for a short duration. One of the reasons is believed to be wear of desensitizing agent by tooth brushing. To reduce the... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of composite resin to high performance polymer PEKK according to surface treatments and bonding materials
-
Lee KS, Shin MS, Lee JY, Ryu JJ, Shin SW
- KMID: 2393220
- J Adv Prosthodont.
- 2017 Oct;9(5):350-357.
- doi: 10.4047/jap.2017.9.5.350
PURPOSE: The object of the present study was to evaluate the shear bonding strength of composite to PEKK by applying several methods of surface treatment associated with various bonding materials. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- Debonding forces of three different customized bases of a lingual bracket system
-
Sung JW, Kwon TY, Kyung HM
- KMID: 2273415
- Korean J Orthod.
- 2013 Oct;43(5):235-241.
- doi: 10.4041/kjod.2013.43.5.235
OBJECTIVE: The purpose of this study was to investigate whether extension of the custom base is necessary for enhancement of bond strength, by comparing the debonding forces and residual adhesives... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of solvent volatilization time on the bond strength of etch-and-rinse adhesive to dentin using conventional or deproteinization bonding techniques
-
Sousa Junior JAd, Carregosa Santana ML, Figueiredo FEDd, Faria-e-Silva AL
- KMID: 2396463
- Restor Dent Endod.
- 2015 Aug;40(3):202-208.
- doi: 10.5395/rde.2015.40.3.202
OBJECTIVES: This study determined the effect of the air-stream application time and the bonding technique on the dentin bond strength of adhesives with different solvents. Furthermore, the content and volatilization... -
- CITED
-
- Close
- SHARE
-
- Close
- Management of dental erosion induced by gastro-esophageal reflux disorder with direct composite veneering aided by a flexible splint matrix
-
Chockattu , Deepak BS, Sood A, Niranjan N, Jayasheel , Goud MK
- KMID: 2406098
- Restor Dent Endod.
- 2018 Feb;43(1):e13.
- doi: 10.5395/rde.2018.43.e13
Dental erosion is frequently overlooked in clinical practice. The management of erosion-induced damage to the dentition is often delayed, such that extensive occlusal rehabilitation is required. These cases can be... -
- CITED
-
- Close
- SHARE
-
- Close
- Does the time interval after bleaching influence the adhesion of orthodontic brackets?
-
Nascimento GCR, de Miranda CA, Machado SM, Brandao GA, de Almeida HA, Silva CM
- KMID: 2273416
- Korean J Orthod.
- 2013 Oct;43(5):242-247.
- doi: 10.4041/kjod.2013.43.5.242
OBJECTIVE: To test the null hypothesis that no difference exists between the effects of at-home bleaching and in-office bleaching on shear bond strength (SBS) with bracket bonding at 4 different... -
- CITED
-
- Close
- SHARE
-
- Close
- In vivo optical coherence tomographic imaging to monitor gingival recovery and the adhesive interface in aesthetic oral rehabilitation: A case report
-
Graça ND, Palmeira A, Fernandes , Pedrosa MD, Guimarães RP, dos Santos SC, Gomes AS, da Silva C
- KMID: 2450183
- Imaging Sci Dent.
- 2019 Jun;49(2):171-176.
- doi: 10.5624/isd.2019.49.2.171
The available methods for veneer evaluation are limited to clinical and radiographic examinations, which may not allow the appropriate identification of failure. In this report, we demonstrate the use of... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of different universal adhesives on the repair performance of hybrid CAD-CAM materials
-
Demirel G, Baltacıoğlu IH
- KMID: 2457503
- Restor Dent Endod.
- 2019 Aug;44(3):e23.
- doi: 10.5395/rde.2019.44.e23
OBJECTIVES: The aim of this study was to investigate the microshear bond strength (μSBS) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics
-
Mosharraf , Rismanchian M, Savabi O, Ashtiani A
- KMID: 2054757
- J Adv Prosthodont.
- 2011 Dec;3(4):221-228.
- doi: 10.4047/jap.2011.3.4.221
PURPOSE: Veneering porcelain might be delaminated from underlying zirconia-based ceramics. The aim of this study was the evaluation of the effect of different surface treatments and type of zirconia (white... -
- CITED
-
- Close
- SHARE
-
- Close
- Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding
-
Kim DH, Son JS, Jeong SH, Kim YK, Kim KH, Kwon TY
- KMID: 2118237
- J Adv Prosthodont.
- 2015 Apr;7(2):85-92.
- doi: 10.4047/jap.2015.7.2.85
PURPOSE: This study aimed to investigate the efficacy of cleaning solutions on saliva-contaminated zirconia in comparison to air-abrasion in terms of resin bonding. MATERIALS AND METHODS: For saliva-contaminated airabraded zirconia, seven... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of post surface conditioning before silanization on bond strength between fiber post and resin cement
-
Mosharraf , Ranjbarian P
- KMID: 2284751
- J Adv Prosthodont.
- 2013 May;5(2):126-132.
- doi: 10.4047/jap.2013.5.2.126
PURPOSE: Post surface conditioning is necessary to expose the glass fibers to enable bonding between fiber post and resin cement. The purpose of the present study was to evaluate the... -
- CITED
-
- Close
- SHARE
-
- Close
- Early complications and performance of 327 heat-pressed lithium disilicate crowns up to five years
-
Huettig F, Gehrke UP
- KMID: 2376843
- J Adv Prosthodont.
- 2016 Jun;8(3):194-200.
- doi: 10.4047/jap.2016.8.3.194
PURPOSE: The prospective follow-up aimed to assess the performance of lithium disilicate crowns and clinical reasons of adverse events compromising survival and quality. MATERIALS AND METHODS: 58 patients were treated with... -
- CITED
-
- Close
- SHARE
-
- Close
- Efficacy of various cleansing techniques on dentin wettability and its influence on shear bond strength of a resin luting agent
-
Munirathinam D, Mohanaj D, Beganam M
- KMID: 2176408
- J Adv Prosthodont.
- 2012 Aug;4(3):139-145.
- doi: 10.4047/jap.2012.4.3.139
PURPOSE: To evaluate the shear bond strength of resin luting agent to dentin surfaces cleansed with different agents like pumice, ultrasonic scaler with chlorhexidine gluconate, EDTA and the influence of... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface treatments and universal adhesive application on the microshear bond strength of CAD/CAM materials
-
Şişmanoğlu S, Gürcan AT, Yıldırım-Bilmez Z, Turunç-Oğuzman R, Gümüştaş B
- KMID: 2470794
- J Adv Prosthodont.
- 2020 Feb;12(1):22-32.
- doi: 10.4047/jap.2020.12.1.22
PURPOSE: The aim of this study was to evaluate the microshear bond strength (µSBS) of four computer-aided design/computer-aided manufacturing (CAD/CAM) blocks repaired with composite resin using three different surface treatment... -
- CITED
-
- Close
- SHARE
-
- Close
