- Effect of dental bleaching on the microhardness and surface roughness of sealed composite resins
-
Fernandes , Strazzi-Sahyon HB, Suzuki TY, Briso AL, dos Santos PH
- KMID: 2470346
- Restor Dent Endod.
- 2020 Feb;45(1):e12.
- doi: 10.5395/rde.2020.45.e12
OBJECTIVES: The aim of this in vitro study was to evaluate the microhardness and surface roughness of composite resins before and after tooth bleaching procedures. MATERIALS AND METHODS: Sixty specimens were... -
- CITED
-
- Close
- SHARE
-
- Close
- Functional and aesthetic rehabilitation in posterior tooth with bulk-fill resin composite and occlusal matrix
-
Francisconi-dos-Rios LF, Tavares JA, Oliveira L, Moreira JC, Nahsan FP
- KMID: 2470344
- Restor Dent Endod.
- 2020 Feb;45(1):e9.
- doi: 10.5395/rde.2020.45.e9
The restorative procedure in posterior teeth involves clinical steps related to professional skill, especially when using the incremental technique, which may fail in the long term. A recent alternative is... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the shear bond strengths and shrinkage stresses of various domestic composite resins
-
Lee JM, Park SY, Lee SH, Jih MK, Lee NY
- KMID: 2470502
- Oral Biol Res.
- 2019 Dec;43(4):250-258.
- doi: 10.21851/obr.43.04.201912.250
The aim of this study was to evaluate the shrinkage stresses and shear bond strengths of various domestic composite resins by comparing them using Filtek Z-250â„¢ (3M ESPE, USA). In... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of zirconia to resin: The effects of specimen preparation and loading procedure
-
Chen B, Yang L, Lu Z, Meng H, Wu X, Chen C, Xie H
- KMID: 2466246
- J Adv Prosthodont.
- 2019 Dec;11(6):313-323.
- doi: 10.4047/jap.2019.11.6.313
PURPOSE: Shear bond strength (SBS) test is the most commonly used method for evaluating resin bond strength of zirconia, but SBS results vary among different studies even when evaluating the... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of individualization of fiberglass posts using bulk-fill resin-based composites on cementation: an in vitro study
-
Lins RB, Cordeiro J, Rangel CP, Antunes TB, Martins LR
- KMID: 2463465
- Restor Dent Endod.
- 2019 Nov;44(4):e37.
- doi: 10.5395/rde.2019.44.e37
OBJECTIVES: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. MATERIALS AND METHODS: The roots from a total of 100 bovine incisors were randomly... -
- CITED
-
- Close
- SHARE
-
- Close
- Financial estimate of light-curing composite resin treatment after National Health Insurance Service coverage
-
Ryu JI, Jung SH, Han DH, Lee SR, Jeon JE
- KMID: 2459411
- J Korean Acad Oral Health.
- 2019 Sep;43(3):136-141.
- doi: 10.11149/jkaoh.2019.43.3.136
OBJECTIVES: This study aimed to estimate the financial budget of light-curing composite resin fillings based on the expanded coverage of the National Health Insurance Service (NHIS), called “Moon Care.†METHODS: The... -
- CITED
-
- Close
- SHARE
-
- Close
- Wear resistance of indirect composite resins used for provisional restorations supported by implants
-
Tsujimoto , Jurado C, Villalobos-Tinoco J, Barkmeier , Fischer N, Takamizawa T, Latta M, Miyazaki M
- KMID: 2455932
- J Adv Prosthodont.
- 2019 Aug;11(4):232-238.
- doi: 10.4047/jap.2019.11.4.232
PURPOSE: The aim of this study was to investigate simulated localized and generalized wear of indirect composite resins used for implant supported provisional restorations. MATERIALS AND METHODS: The study investigated ten... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface treatments on the bond strength of indirect resin composite to resin matrix ceramics
-
Çelik E, Şahin SC, Dede DO
- KMID: 2455931
- J Adv Prosthodont.
- 2019 Aug;11(4):223-231.
- doi: 10.4047/jap.2019.11.4.223
PURPOSE: The purpose of this study was to evaluate the shear bond strength (SBS) of an indirect resin composite (IRC) to the various resin matrix ceramic (RMC) blocks using different... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the color stability of light cured composite resins according to the resin matrices
-
Yu DH, Jung HJ, Choi SH, Hwang IN
- KMID: 2452690
- Korean J Dent Mater.
- 2019 Jun;46(2):109-120.
- doi: 10.14815/kjdm.2019.46.2.109
The purpose of this study was to evaluate the color stability of light cured composite resins according to the resin matrices. Three kinds of resin matrices such as Bis-GMA (Venus®... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of pH variation on flexural and compressive properties of composite resins
-
Jung SB, Moon K, Seol HJ, Kang JS, Kwon YH
- KMID: 2452685
- Korean J Dent Mater.
- 2019 Jun;46(2):53-60.
- doi: 10.14815/kjdm.2019.46.2.53
The pH of the oral cavity can dynamically change due to diverse foods and beverages served. The purpose of the present study was to evaluate flexural and compressive properties of... -
- CITED
-
- Close
- SHARE
-
- Close
- Inflammatory Effect of Light-Emitting Diodes Curing Light Irradiation on Raw264.7 Macrophage
-
Jeong MJ, Kil KS, Lee MH, Lee SY, Lee HJ, Lim DS, Jeong SJ
- KMID: 2451791
- J Dent Hyg Sci.
- 2019 Jun;19(2):133-140.
- doi: 10.17135/jdhs.2019.19.2.133
BACKGROUND: The light-emitting diode (LED) curing light used is presumed to be safe. However, the scientific basis for this is unclear, and the safety of LED curing light is still... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of polishing methods on color change by water absorption in several composite resins
-
Kim HJ, Kim MY, Song BC, Kim SH, Kim JH
- KMID: 2450920
- J Dent Rehabil Appl Sci.
- 2019 Mar;35(1):1-10.
- doi: 10.14368/jdras.2019.35.1.1
PURPOSE: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. MATERIALS AND METHODS: Two bulk-fill and four conventional resin composites... -
- CITED
-
- Close
- SHARE
-
- Close
- Biological Effects of Light-Emitting Diodes Curing Unit on MDPC-23 Cells and Lipopolysaccharide Stimulated MDPC-23 Cells
-
Jeong MJ, Jeong SJ
- KMID: 2446703
- J Dent Hyg Sci.
- 2019 Mar;19(1):39-47.
- doi: 10.17135/jdhs.2019.19.1.39
BACKGROUND: Light-emitting diodes curing unit (LCU), which emit blue light, is used for polymerization of composite resins in many dentistry. Although the use of LCU for light-cured composite resin polymerization... -
- CITED
-
- Close
- SHARE
-
- Close
- Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: microhardness and roughness testing
-
Ehrmann E, Medioni E, Brulat-Bouchard N
- KMID: 2438287
- Restor Dent Endod.
- 2019 Feb;44(1):e1.
- doi: 10.5395/rde.2019.44.e1
OBJECTIVES: The aim of this in vitro study was to test the effect of 2 finishing–polishing sequences (QB, combining a 12/15-fluted finishing bur and an EVO-Light polisher; QWB, adding a... -
- CITED
-
- Close
- SHARE
-
- Close
- Endocrown restorations for extensively damaged posterior teeth: clinical performance of three cases
-
Tzimas K, Tsiafitsa , Gerasimou , Tsitrou E
- KMID: 2455569
- Restor Dent Endod.
- 2018 Nov;43(4):e38.
- doi: 10.5395/rde.2018.43.e38
The restoration of endodontically treated teeth (ETT) with more than one cusp missing and thin remaining walls is challenging for the general practitioner. The use of posts combined with full... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of 457 nm light on the polymerization of dental composite resins
-
Ro JH, Yi DH, Seol HJ, Kwon YH
- KMID: 2423003
- Korean J Dent Mater.
- 2018 Sep;45(3):179-186.
- doi: 10.14815/kjdm.2018.45.3.179
The aim of this study was to determine if a 457 nm blue laser could effectively polymerize dental composite resins. After light curing 6 dental composite resins using a laser... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of Fluoride Recharging on Fluoride Release and Surface Properties of Orthodontic Bracket Adhesives
-
Byeon SM
- KMID: 2434974
- J Dent Hyg Sci.
- 2018 Aug;18(4):218-226.
- doi: 10.17135/jdhs.2018.18.4.218
The aim of this study was to compare fluoride release and surface changes according to different orthodontic bracket adhesives the application of fluoride products. We used non-fluoridated composite resin Transbond... -
- CITED
-
- Close
- SHARE
-
- Close
- Flexural and compressive properties of layered specimens formed with flowable and composite resins
-
Lee JH, Kim SS, Seol HJ, Kwon YH
- KMID: 2415725
- Korean J Dent Mater.
- 2018 Jun;45(2):129-138.
- doi: 10.14815/kjdm.2018.45.2.129
Flowable resins can be used as a base material during the restoration of deep tooth cavity. The purpose of the present study was to evaluate the mechanical properties of the... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of thermocycling on the degree of conversion and mechanical properties of a microhybrid dental resin composite
-
Ghavami-Lahiji M, Firouzmanesh M, Bagheri H, Jafarzadeh Kashi TS, Razazpour , Behroozibakhsh M
- KMID: 2416525
- Restor Dent Endod.
- 2018 May;43(2):e26.
- doi: 10.5395/rde.2018.43.e26
OBJECTIVE: The purpose of this study was to investigate the degree of conversion (DC) and mechanical properties of a microhybrid Filtek Z250 (3M ESPE) resin composite after aging. METHOD: The specimens... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of light-transmittance in dental tissues and dental composite restorations using incremental layering build-up with varying enamel resin layer thickness
-
Rocha Maia R, Oliveira D, D'Antonio , Qian F, Skiff F
- KMID: 2416522
- Restor Dent Endod.
- 2018 May;43(2):e22.
- doi: 10.5395/rde.2018.43.e22
OBJECTIVES: To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. MATERIALS AND METHODS: B1-colored natural teeth slabs were compared... -
- CITED
-
- Close
- SHARE
-
- Close
