J Korean Orthop Assoc.
1989 Dec;24(6):1665-1672. 10.4055/jkoa.1989.24.6.1665.
Axisymmetric Contact Stress analysis of an Artificial Hip Joint of the Conical Fitting Type
- KMID: 2445524
- DOI: http://doi.org/10.4055/jkoa.1989.24.6.1665
Abstract
- The purpose of this study is to investigate the effect of the ball-cone contact interface variation on the ceramic ball stress which is the dominant factor of the design of the moldular artificial hip joint. A contact stress analysis problem is formulated using the optimization principle and finite element analysis technique on the ball-cone system of three dimensional axi-symmetrical model, Numerical procedure is employed to get the solution for varying angles of cones and angular mismatches between the ball and cone interfaces. There is a fair amount of friction in the interface and included in the analysis model.
Keyword
- Full Text Links
-
- Actions
-
Cited
- CITED
-
- Close
- Share
-
- Similar articles
-
- Three-dimensional finite element analysis for influence of marginal bone resorption on stress distribution in internal conical joint type implant fixture
- Influence of implant-abutment interface design, implant diameter and prosthetic table width on strength of implant-abutment interface: three-dimensional finite element analysis
- History of the Artificial Hip Joint
- Improvement of Lubrication Properties for New Surface Structure with Regular Patterning for the Frictional Surfaces of the Artificial Joints: Evaluation of Lubrication Properties by the Pendulum Type Hip Joint Simulator
- Guide for Successful Scleral Lens Fitting
