Korean J Orthod.
1990 Nov;20(3):633-641.
The shear bond strength of two adhesives bonded to composite resin and glass ionomer cement restorations
- Affiliations
-
- 1Department of Orthodontics, College of Dentistry, Pusan National University, Korea.
Abstract
- If the bond strength is sufficient to resist orthodontic force, orthodontic brackets can be bonded to restorations. Orthodontic brackets were bonded to composite resin and glass ionomer cement restorations wtih no-mix adhesive or glass ionomer cement. The shear bond strength of adhesives bonded to restorations was studied in vitro. Orthodontic brackets were bonded to 10 extracted natural teeth, 40 composite resin restorations and 40 glass ionomer restorations. The surfaces of composite resin restorations were roughened or applied with bonding agent (Scothbond) after surface roughening. The surfaces of glass ionomer cement restorations were conditioned with acid etching or applied with Scotchbond to etched surface. The adhesive was no-mix resin or glass ionomer cement. The shear bond strength was measured. The results were as follows: 1. Orthodontic brackets could be bonded to composite resin restorations effectively as they could be bonded to acid etched enamel with no-mix adhesive. The shear bond strength was sufficient to resist orthodontic force and was not affected by bonding agent greatly. 2. The shear bond strength of no-mix adhesive bonded to acid etched glass ionomer cement restorations was sufficient to resist orthodontic force. However, the fracture risk of glass ionomer cement restorations was increased during debonding. The bonding agent couldn't increase the shear bond strength greatly. 3. The shear bond strength of glass ionomer cement bonded to glass ionomer cement restorations was lower than that of no-mix adhesive. The shear bond strength was sufficient to resist orthodontic force and was greatly decreased by bonding agent. 4. The shear bond strength of glass ionomer cement bonded to composite resin restorations was too low to resist orthodontic force.
- Full Text Links
-
- Actions
-
Cited
- CITED
-
- Close
- Share
-
- Similar articles
-
- A study on the shear bond strength of light-cured glass ionomer cement
- A comparative study on shear bond strengths influenced by time elapsed after bracket bonding with a light-cured glass ionomer cement
- The effects of surface treatments on shear bond strengths of light-cured and chemically cured glass ionomer cements to enamel
- The effect of light cured glass ionomer cment of the shear bond strength of orthodontic brackets
- Change in shear bond strength of orthodontic brackets using self-etching primer according to adhesive types and saliva contamination
