- Correlation between microhardness and wear resistance of dental alloys against monolithic zirconia
-
Cha MS, Lee SW, Huh YH, Cho LR, Park CJ
- KMID: 2516992
- J Adv Prosthodont.
- 2021 Jun;13(3):127-135.
- doi: 10.4047/jap.2021.13.3.127
Purpose: The aim of this study is to compare the hardness according to the conditions of metal alloys. Moreover, the correlation between the cast crown hardness before and after wear... -
- CITED
-
- Close
- SHARE
-
- Close
- Pull-off resistance of a screwless implantabutment connection and surface evaluation after cyclic loading
-
Alevizakos V, Mosch R, Mitov G, Othman A, See Cv
- KMID: 2516995
- J Adv Prosthodont.
- 2021 Jun;13(3):152-159.
- doi: 10.4047/jap.2021.13.3.152
Purpose The aim of this study was to investigate to what extent cyclic load affects the screwless implant-abutment connection for Morse taper dental implants. Materials and Methods 16 implants (SICvantage... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of repeated use of an implant handpiece on an output torque: An in-vitro study
-
Son K, Son YT, Kim JY, Lee JM, Yu WJ, Kim JW, Lee KB
- KMID: 2516993
- J Adv Prosthodont.
- 2021 Jun;13(3):136-143.
- doi: 10.4047/jap.2021.13.3.136
Purpose This study aimed to evaluate the effect of repeated use of an implant handpiece under an implant placement torque (35 Ncm) and overloading torque condition (50 Ncm) on an... -
- CITED
-
- Close
- SHARE
-
- Close
- Micro-shear bond strengths of resin-matrix ceramics subjected to different surface conditioning strategies with or without coupling agent application
-
Günal-Abduljalil B, Önöral , Ongun S
- KMID: 2516998
- J Adv Prosthodont.
- 2021 Jun;13(3):.
- doi: 10.4047/jap.2021.13.3.180
Purpose This study aimed to assess the influence of various micromechanical surface conditioning (MSC) strategies with or without coupling agent (silane) application on the micro-shear bond strength (µSBS) of resin-... -
- CITED
-
- Close
- SHARE
-
- Close
- Wear of 3D printed and CAD/CAM milled interim resin materials after chewing simulation
-
Myagmar G, Lee JH, Ahn JS, Luke Yeo IS, Yoon HI, Han JS
- KMID: 2516994
- J Adv Prosthodont.
- 2021 Jun;13(3):144-151.
- doi: 10.4047/jap.2021.13.3.144
PURPOSE The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- A within-subject comparison of short implants in the posterior region: retrospective study of up to 10 years
-
Segalla DB, Villarinho EA, Correia ARM, Vigo , Shinkai RSA
- KMID: 2516997
- J Adv Prosthodont.
- 2021 Jun;13(3):172-179.
- doi: 10.4047/jap.2021.13.3.172
Purpose This intra-patient retrospective study of up to 10 years evaluated the clinical success and risk factors of 6- and 8-mm long implants and their respective prostheses. Materials and Methods... -
- CITED
-
- Close
- SHARE
-
- Close
- Color stability of 3D-printed denture resins: effect of aging, mechanical brushing and immersion in staining medium
-
Alfouzan AF, Alotiabi HM, Labban N, Al-Otaibi HN, Al Taweel SM, AlShehri HA
- KMID: 2516996
- J Adv Prosthodont.
- 2021 Jun;13(3):160-171.
- doi: 10.4047/jap.2021.13.3.160
Purpose This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods Forty... -
- CITED
-
- Close
- SHARE
-
- Close
