- A 5-year retrospective clinical study of the Dentium implants
-
Lee JY, Park HJ, Kim JE, Choi YG, Kim YS, Huh JB, Shin SW
- KMID: 2054758
- J Adv Prosthodont.
- 2011 Dec;3(4):229-235.
- doi: 10.4047/jap.2011.3.4.229
PURPOSE: The aim of this retrospective study was to evaluate cumulative survival rate (CSR) of Implantium implants followed for 5 years and association between risk factors and the CSR. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics
-
Mosharraf , Rismanchian M, Savabi O, Ashtiani A
- KMID: 2054757
- J Adv Prosthodont.
- 2011 Dec;3(4):221-228.
- doi: 10.4047/jap.2011.3.4.221
PURPOSE: Veneering porcelain might be delaminated from underlying zirconia-based ceramics. The aim of this study was the evaluation of the effect of different surface treatments and type of zirconia (white... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study on the initial stability of different implants placed above the bone level using resonance frequency analysis
-
Kang IH, Kim CW, Lim YJ, Kim MJ
- KMID: 2054753
- J Adv Prosthodont.
- 2011 Dec;3(4):190-195.
- doi: 10.4047/jap.2011.3.4.190
PURPOSE: This study evaluated the initial stability of different implants placed above the bone level in different types of bone. MATERIALS AND METHODS: As described by Lekholm and Zarb, cortical layers... -
- CITED
-
- Close
- SHARE
-
- Close
- A retrospective study on related factors affecting the survival rate of dental implants
-
Jang HW, Kang JK, Lee K, Lee YS, Park PK
- KMID: 2054755
- J Adv Prosthodont.
- 2011 Dec;3(4):204-215.
- doi: 10.4047/jap.2011.3.4.204
PURPOSE: The aim of this retrospective study is to analyze the relationship between local factors and survival rate of dental implant which had been installed and restored in Seoul Veterans... -
- CITED
-
- Close
- SHARE
-
- Close
- Frenectomy for improvement of a problematic conventional maxillary complete denture in an elderly patient: a case report
-
Al Jabbari YS
- KMID: 2054759
- J Adv Prosthodont.
- 2011 Dec;3(4):236-239.
- doi: 10.4047/jap.2011.3.4.236
Maxillary labial and buccal frena are considered as normal anatomic structures in the oral cavity. However, they may exist intraorally as a thick broad fibrous attachment and/or become located near... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of thermocycling on the bonding of different restorative materials to access opening through porcelain fused to metal restorations
-
AL-Moaleem MM, Shah FK, Khan NS, Porwal A
- KMID: 2054752
- J Adv Prosthodont.
- 2011 Dec;3(4):186-189.
- doi: 10.4047/jap.2011.3.4.186
PURPOSE: Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparison of marginal fit of glass infiltrated alumina copings fabricated using two different techniques and the effect of firing cycles over them
-
Bhowmik H, Parkhedkar R
- KMID: 2054754
- J Adv Prosthodont.
- 2011 Dec;3(4):196-203.
- doi: 10.4047/jap.2011.3.4.196
PURPOSE: This study evaluated marginal fit of glass infiltrated alumina cores fabricated using two techniques and their marginal stability after firing cycles of veneering porcelain. MATERIALS AND METHODS: Fifteen standardized all-ceramic... -
- CITED
-
- Close
- SHARE
-
- Close
- Polymerization behavior and thermal characteristics of two new composites at five temperatures: refrigeration to preheating
-
Jafarzadeh-Kashi TS, Mirzaii M, Erfan M, Fazel A, Eskandarion S, Rakhshan V
- KMID: 2054756
- J Adv Prosthodont.
- 2011 Dec;3(4):216-220.
- doi: 10.4047/jap.2011.3.4.216
PURPOSE: Heat of composite polymerization (HP) indicates setting efficacy and temperature increase of composite in clinical procedures. The purpose of this in vitro experimental study was to evaluate the effects... -
- CITED
-
- Close
- SHARE
-
- Close
- Accuracy of five implant impression technique: effect of splinting materials and methods
-
Lee SJ, Cho SB
- KMID: 2054751
- J Adv Prosthodont.
- 2011 Dec;3(4):177-185.
- doi: 10.4047/jap.2011.3.4.177
PURPOSE: The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS: A stainless steel metal model... -
- CITED
-
- Close
- SHARE
-
- Close
