- A comparative study on the bond strength of porcelain to the millingable Pd-Ag alloy
-
Hong JT, Shin SY
- KMID: 2284737
- J Adv Prosthodont.
- 2014 Oct;6(5):372-378.
- doi: 10.4047/jap.2014.6.5.372
PURPOSE: The porcelain fused to gold has been widely used as a restoration both with the natural esthetics of the porcelain and durability and marginal fit of metal casting. However,... -
- CITED
-
- Close
- SHARE
-
- Close
- Surface roughness changes caused by the galvanic corrosion between a titanium abutment and base metal alloy
-
Lee JJ, Song KY, Ahn SK, Park JM
- KMID: 2000285
- J Korean Acad Prosthodont.
- 2011 Jan;49(1):65-72.
- doi: 10.4047/jkap.2011.49.1.65
PURPOSE: The purpose of this study was to evaluate the level of electro-chemical corrosion and surface roughness change for the cases of Ti abutment connected to restoration made of base... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative study in marginal fit of a pressed ceramic and feldspathic porcelain fused to metal restoration
-
Kim YY, Park WH, Yoo DY, Lee YS
- KMID: 2195544
- J Korean Acad Prosthodont.
- 2010 Oct;48(4):273-279.
- doi: 10.4047/jkap.2010.48.4.273
PURPOSE: The purpose of this in vitro study was to compare the marginal adaptation of a ceramic-pressed-to-metal restoration with traditional metal-ceramic restoration. MATERIALS AND METHODS: Duplicating the prepared resin tooth, 20... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of improperly contoured and poor fitting restorations to patient with oral lichen planus: periodontal and prosthetic treatment
-
Shin JB, Cho JH, Lee CH
- KMID: 2150202
- J Dent Rehabil Appl Sci.
- 2015 Dec;31(4):371-377.
- doi: 10.14368/jdras.2015.31.4.371
Oral lichen planus (OLP) is a common mucocutaneous disease, which presents as bilateral or multiple lesions. The several factors are implicated in etiology of OLP such as dental restorations, systemic... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparison of the fidelity of various zirconia-based all-ceramic crowns fabricated with CAD/CAM systems
-
Kim SJ, Jo KH, Lee KB
- KMID: 2195610
- J Korean Acad Prosthodont.
- 2009 Apr;47(2):148-155.
- doi: 10.4047/jkap.2009.47.2.148
STATEMENT OF PROBLEM: The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems there is a need... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparison of the fidelity between various cores fabricated with CAD/CAM systems
-
Park SH, Lee KB
- KMID: 2118758
- J Korean Acad Prosthodont.
- 2008 Jun;46(3):269-279.
STATEMENT OF PROBLEM: Recently, various all-ceramic crowns fabricated with CAD/CAM systems have come into wide use in dental clinic. However, there are only few domestic studies on CAD/CAM restorations.... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of effect of galvanic corrosion between nickel-chromium metal and titanium on ion release and cell toxicity
-
Lee JJ, Song KY, Ahn SG, Choi JY, Seo JM, Park JM
- KMID: 2118249
- J Adv Prosthodont.
- 2015 Apr;7(2):172-177.
- doi: 10.4047/jap.2015.7.2.172
PURPOSE: The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness
-
Ayyildiz S, Soylu EH, Ide S, Kilic S, Sipahi C, Piskin B, Gokce HS
- KMID: 2176541
- J Adv Prosthodont.
- 2013 Nov;5(4):471-478.
- doi: 10.4047/jap.2013.5.4.471
PURPOSE: The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal... -
- CITED
-
- Close
- SHARE
-
- Close
- The evaluation of maximum bite force in the occlusal rehabilitation of patient with Angle Class III malocclusion: a case report
-
Karakis D, Kaymak D, Dogan A
- KMID: 2118178
- J Adv Prosthodont.
- 2013 Aug;5(3):364-368.
- doi: 10.4047/jap.2013.5.3.364
The case report describes the occlusal rehabilitation of a male patient with Angle Class III malocclusion and its effect on maximum bite force. The main complaints of patient were masticatory... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of surface finishes on flexural strength, fracture toughness of feldspathic dental porcelain
-
Chang IS, Lee SH, Yang JH, Han JS, Lee JB
- KMID: 2000725
- J Korean Acad Prosthodont.
- 2005 Jun;43(3):293-305.
STATEMENT OF PROBLEMS: Conventional feldspathic porcelain is used extensively as a restorative material and it is subjected to grinding and polishing during fabrication and delivery procedures. There is still considerable... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro study of compressive fracture strength of Empress 2 crowns cemented with various luting agents
-
Kim MH, Yang JH, Lee SH, Chung HY, Chang IT
- KMID: 2195896
- J Korean Acad Prosthodont.
- 2001 Jun;39(3):260-272.
All-ceramic restorations have had a more limited life expectancy than metal ceramic restorations because of their low strength. Their relatively lower strength and resistance to fracture have restricted the use... -
- CITED
-
- Close
- SHARE
-
- Close
- The management of a complex implant case using CAD-CAM technology: A clinical report
-
Park EJ
- KMID: 2321755
- J Korean Acad Prosthodont.
- 2008 Dec;46(6):634-638.
PURPOSE: The application of computer-aided technology to implant dentistry has created new opportunities for treatment planning, surgery and prosthodontic treatment, but the correct selection and combination of available methods may... -
- CITED
-
- Close
- SHARE
-
- Close
