- Fabrication of complete denture using 3D printing: a case report
-
Lee E, Park C, Yun K, Lim HP, Park S
- KMID: 2529454
- J Korean Acad Prosthodont.
- 2022 Apr;60(2):202-210.
- doi: 10.4047/jkap.2022.60.2.202
Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can... -
- CITED
-
- Close
- SHARE
-
- Close
- Esthetic restoration using digital techniques in a patient with cleft lip and palate
-
Park L, Park S, Lim HP, Yun K, Park C, Jang W
- KMID: 2524717
- Oral Biol Res.
- 2021 Dec;45(4):215-222.
- doi: 10.21851/obr.45.04.202112.215
The use of prosthetic restorations in patients with cleft lip and palate is limited due to the presence of an imbalanced facial harmony, a narrowing of the nose, and a... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of denture by using the individual tray duplicated an existing denture through 3D printing: A case report
-
Park J, Park S, Lim HP, Park C, Yun KD
- KMID: 2521845
- J Korean Acad Prosthodont.
- 2021 Oct;59(4):508-514.
- doi: 10.4047/jkap.2021.59.4.508
In this report, Replicated denture was fabricated by 3d printing after scanning the existing denture. It was used as an individual tray in closed-mouth technique. It reduced laboratory process and clinical... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant overdenture with closed impression technique for patient with Myasthenia Gravis: A case report
-
Park L, Park M, Park S, Lim HP, Jang W
- KMID: 2521840
- J Korean Acad Prosthodont.
- 2021 Oct;59(4):459-468.
- doi: 10.4047/jkap.2021.59.4.459
In patients with myasthenia gravis, it is difficult to manufacture and maintain dentures because the muscles and nervous system in the oral cavity are not properly adjusted. In addition, excessively... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of implant alignment and load direction on mandibular bone and implant: finite element analysis
-
Chung H, Park C, Yun KD, Lim HP, Park SW, Yang H
- KMID: 2512112
- J Dent Rehabil Appl Sci.
- 2020 Sep;36(3):176-182.
- doi: 10.14368/jdras.2020.36.3.176
Purpose: To evaluate the effects of load direction, number of implants, and alignment of implant position on stress distribution in implant, prosthesis, and bone tissue. Materials and Methods: Four 3D... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of mandibular suction denture for complete edentulous patient: A case report
-
Park M, Park SW, Lim HP, Park C, Yun KD
- KMID: 2504695
- J Korean Acad Prosthodont.
- 2020 Jul;58(3):257-267.
- doi: 10.4047/jkap.2020.58.3.257
The goal of suction denture is to enhance retention of dentures by the formation of negative pressure between the denture base and the underlying tissue and sealing around the denture... -
- CITED
-
- Close
- SHARE
-
- Close
- Full mouth rehabilitation on the patient with deep bite and posterior bite collapse using re-establishment of occlusal vertical dimension
-
Jang WH, Jo YJ, Lim HP, Yun KD, Park SW
- KMID: 2469921
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):50-57.
- doi: 10.4047/jkap.2020.58.1.50
The loss of posterior support and the abnormal jaw relation can cause pathologic findings. If deep bite patients with multiple missing teeth, can not have the stable posterior contact, the... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of closed hollow obturator for hard palate defect patient undergone maxillectomy
-
Jang WH, Lim HP, Yun KD, Park C, Yang HS
- KMID: 2469918
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):30-34.
- doi: 10.4047/jkap.2020.58.1.30
Maxillectomy is performed to remove the tumor in the palate, maxillary sinus, buccal mucosa or nasal cavity. The resection range depends on the size and the extent of the tumor... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
-
Kim HA, Lim HP, Kang H, Yang H, Park SW, Yun KD
- KMID: 2461157
- J Korean Acad Prosthodont.
- 2019 Oct;57(4):483-489.
- doi: 10.4047/jkap.2019.57.4.483
With development of digital dentistry, the 3-dimensional (3D) manufacturing industry using computer-aided design and computer-aided manufacturing (CAD/CAM) has grown dramatically in recent years. Denture fabrication using digital method is also... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of different impression techniques for edentulous jaws using three-dimensional analysis
-
Jung S, Park C, Yang HS, Lim HP, Yun KD, Ying Z, Park SW
- KMID: 2450994
- J Adv Prosthodont.
- 2019 Jun;11(3):179-186.
- doi: 10.4047/jap.2019.11.3.179
PURPOSE: The purpose of this study was to compare two novel impression methods and a conventional impression method for edentulous jaws using 3-dimensional (3D) analysis software. MATERIALS AND METHODS: Five edentulous... -
- CITED
-
- Close
- SHARE
-
- Close
- Restoration of bilateral distal extension removable partial denture using a fixed implant prosthesis in unilateral partial edentulous patient: A case report
-
Kee W, Park JH, Lim HP, Yun KD, Park SW
- KMID: 2444187
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):176-181.
- doi: 10.4047/jkap.2019.57.2.176
Traditional removable partial denture is a successful treatment for partial edentulous patients. When the abutment is formed with unilateral minority teeth, satisfaction with the use of removable partial denture may... -
- CITED
-
- Close
- SHARE
-
- Close
- Neutral zone approach and external impression for rehabilitation of severely atrophic maxillary and mandibular ridges: a case report
-
Jo Y, Ko CW, Park SW, Yun KD, Park C, Lim HP
- KMID: 2432369
- J Dent Rehabil Appl Sci.
- 2018 Dec;34(4):324-330.
- doi: 10.14368/jdras.2018.34.4.324
In order to produce a stable denture for severe alveolar bone loss area, it is not only important that .0a suitable occlusion is established but also to consider compatibility with... -
- CITED
-
- Close
- SHARE
-
- Close
- Single implant restoration with esthetic prosthodontic treatment in maxillary anterior tooth: A case report
-
Kang H, Seo NR, Park SW, Lim HP, Yun KD, Yang HS
- KMID: 2424037
- J Korean Acad Prosthodont.
- 2018 Oct;56(4):354-359.
- doi: 10.4047/jkap.2018.56.4.354
In a single implant restoration of maxillary anterior teeth, it is difficult to accomplish an aesthetic restoration of the implant prosthesis in the case of gingival recession and bone defect... -
- CITED
-
- Close
- SHARE
-
- Close
- Full mouth rehabilitation of the patient with severe tooth loss and tooth wear with vertical dimension gaining: A case report
-
Jo YJ, Jung S, Yang HS, Park SW, Lim HP, Yun KD, Park C
- KMID: 2424030
- J Korean Acad Prosthodont.
- 2018 Oct;56(4):302-307.
- doi: 10.4047/jkap.2018.56.4.302
Multiple tooth loss and excessive occlusal wear can result in damage to occlusal disharmony, functional disorders and esthetic problems, requiring comprehensive prosthetic treatments. Changing vertical dimension harmonized with surrounding muscle... -
- CITED
-
- Close
- SHARE
-
- Close
- Neutral zone approach and external impression for rehabilitation of macroglossia: a case report
-
Kang H, Seo NR, Park SW, Yun KD, Park C, Lim HP
- KMID: 2422640
- J Dent Rehabil Appl Sci.
- 2018 Sep;34(3):218-224.
- doi: 10.14368/jdras.2018.34.3.218
Macroglossia is an obstacle in regard to general prosthodontic restoration. Not only is it difficult to obtain support and stability from dentures manufactured from normal protocol, obtaining efficacy from basic... -
- CITED
-
- Close
- SHARE
-
- Close
- Stress distribution in premolars restored with inlays or onlays: 3D finite element analysis
-
Yang H, Park C, Shin JH, Yun KD, Lim HP, Park SW, Chung H
- KMID: 2413486
- J Adv Prosthodont.
- 2018 Jun;10(3):184-190.
- doi: 10.4047/jap.2018.10.3.184
PURPOSE: To analyze stress distribution in premolars restored with inlays or onlays using various materials. MATERIALS AND METHODS: Three-dimensional maxillary premolar models of abutments were designed to include the following: 1)... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of complete denture using Centric tray and closed mouth technique for edentulous patient
-
Jung S, Ma B, Yang H, Park S, Lim HP, Yun K
- KMID: 2410115
- J Korean Acad Prosthodont.
- 2018 Apr;56(2):120-125.
- doi: 10.4047/jkap.2018.56.2.120
Conventional denture impression techniques have limitations for edentulous patients with severe alveolar bone resorption and can cause problems from excessive border extension. Especially when a patient has movable tissue it... -
- CITED
-
- Close
- SHARE
-
- Close
- Complete denture rehabilitation of edentulous patient with severe alveolar bone resorption using mandibular suction denture with closed mouth technique: a clinical report
-
Ko CW, Min B, Yang HS, Lim HP, Yun K, Shin JH
- KMID: 2439256
- J Dent Rehabil Appl Sci.
- 2018 Mar;34(1):56-62.
- doi: 10.14368/jdras.2018.34.1.56
When it comes to treat patient with loss of vestibule, conventional denture impression have limitation which can cause problems of excessive border extension. Suction denture with closed mouth technique which... -
- CITED
-
- Close
- SHARE
-
- Close
- Esthetic prosthesis for a patient with the maxillary diastema: a case report
-
Park JH, Kim H, Yun KD, Shin JH, Lim HP
- KMID: 2405545
- J Dent Rehabil Appl Sci.
- 2017 Dec;33(4):314-320.
- doi: 10.14368/jdras.2017.33.4.314
In the treatment of esthetically important areas such as maxillary anterior teeth, they should be corresponded with surrounding tissues, and shape of the smile line, soft tissue, and hard tissue,... -
- CITED
-
- Close
- SHARE
-
- Close
- Graphene as an Enabling Strategy for Dental Implant and Tissue Regeneration
-
Park C, Park S, Lee D, Choi KS, Lim HP, Kim J
- KMID: 2394983
- Tissue Eng Regen Med.
- 2017 Oct;14(5):481-493.
- doi: 10.1007/s13770-017-0052-3
Graphene-based approaches have been influential in the design and manipulation of dental implants and tissue regeneration to overcome the problems associated with traditional titanium-based dental implants, such as their low... -
- CITED
-
- Close
- SHARE
-
- Close
