- A STUDY FOR SETTING AND THERMAL EXPANSION OF DENTAL SOLDERING INVESTMENTS
-
Shin SA, Lim JS, Jeong CM, Jeon YC
- KMID: 1959576
- J Korean Acad Prosthodont.
- 1999 Dec;37(6):730-740.
The purpose of this study was to investigate setting and thermal expansion of dental soldering investments. In order to compare expansion rates and to investigate the effect of water/powder ratio... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-assisted removable partial denture using MilledBar and Attachment in partially edentulous maxilla: A case report
-
Jeong YS, Jeong CM, Yun MJ, Lee SH, Huh JB
- KMID: 2534513
- J Korean Acad Prosthodont.
- 2022 Oct;60(4):412-419.
- doi: 10.4047/jkap.2022.60.4.412
For treatment of partially edentulous patients, a treatment using implant is widely used. Treatment method using implant are implant fixed prostheses and removable partial dentures, and for patients with severe... -
- CITED
-
- Close
- SHARE
-
- Close
- COMPARATIVE STUDY ON THE POSITIONAL STABILITY OF REMOVABLE DIES USING SEVERAL DOWEL PIN SYSTEMS
-
Jeong JH, Jeong CM, Jeon YC
- KMID: 1543960
- J Korean Acad Prosthodont.
- 1998 Oct;36(5):738-747.
The purpose of this study was to compare the positional stability of removable dies using several dowel pin systems. The removable dies were made by using five dowel pin systems:... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of sprue design on the internal porosity of titanium castings
-
Heo SM, Jeon YC, Jeong CM, Lim JS, Jeong HC
- KMID: 2195704
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):147-156.
STATEMENT OF PROBLEM: The high melting temperature and chemical reactivity of titanium necessitates casting machines different from those used in conventional casting. Despite the new developments in Ti casting systems,... -
- CITED
-
- Close
- SHARE
-
- Close
- THE INFLUENCE OF WATTAGE AND CURING TIME OF MICROWAVE ENERGY ON PHYSICAL PROPERTIES OF THE DENTURE BASE RESIN
-
Jeong DS, Lim JS, Jeong CM, Jeon YC
- KMID: 1959579
- J Korean Acad Prosthodont.
- 1999 Dec;37(6):767-775.
The purpose of this study was to evaluate the effect of wattage and curing time on surface hardness, three-point bending strength and internal porosity of microwave curing denture base resin.... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects Of Current Density And Etching Time On Etching Depth And Surface Roughness Of Ni-Cr-Be Alloy
-
Jeong SK, Jeon YC, Jeong CM, Lim JS
- KMID: 2196200
- J Korean Acad Prosthodont.
- 2002 Aug;40(4):323-334.
The purpose of this study is to investigate which current densities and etching times will result in an optimal etching depth and surface roughness when an Ni-Cr-Be alloy is etched... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-assisted overdenture using milled bar and ADDTOC in edentulous maxilla: A case report
-
Jo YB, Jeong CM, Huh JB, Yun MJ, Lee SH, Kim MJ
- KMID: 2529449
- J Korean Acad Prosthodont.
- 2022 Apr;60(2):160-167.
- doi: 10.4047/jkap.2022.60.2.160
One of the treatment options for edentulous state patients with residual ridge resorption is implant overdenture using milled bar and attachment. It not only provides improved retention and stability but... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative studies of retentive forces in maxillary overdenture bar attachments
-
Son CY, Jeong CM, Jeon YC, Lim JS, Jeong HC
- KMID: 2321721
- J Korean Acad Prosthodont.
- 2005 Oct;43(5):650-661.
STATEMENT OF PROBLEM: It could be hypothesised that attachments, which provide more retention against vertical and horizontal dislodgement, will be associated with more favorable parameters of oral function. PURPOSE: This... -
- CITED
-
- Close
- SHARE
-
- Close
- Introduction of Spark Erosion
-
Jeong CM
- KMID: 2195992
- J Korean Acad Prosthodont.
- 2000 Aug;38(4):402-411.
The dental profession is currently experiencing a technology explosion. Processes are being replaced by modern, inexpensive, and precise techniques that can be used to solve complex restorative problems. Electrical discharge... -
- CITED
-
- Close
- SHARE
-
- Close
- Mesenchymal Chondrosarcoma Involving Posterior Bone of C7, T1, T2 and Adjacent Muscles
-
Bae SW, Kim BS, Jeong CM, Kim DH
- KMID: 1941652
- J Korean Soc Spine Surg.
- 2007 Sep;14(3):192-196.
- doi: 10.4184/jkss.2007.14.3.192
A mesenchymal chondrosarcoma is a rare malignant tumor occurring in both the bone and soft tissues, and has the characteristics of a malignant nature. Since its original description in 1959,... -
- CITED
-
- Close
- SHARE
-
- Close
- Retreatment of implant overdenture using Milled Bar and Attachment in a patient using a unilateral prosthetic arm: A case report
-
Park SH, Jeong CM, Yun MJ, Huh JB, Lee SH
- KMID: 2529452
- J Korean Acad Prosthodont.
- 2022 Apr;60(2):187-194.
- doi: 10.4047/jkap.2022.60.2.187
The use of implants could improve the support, retention, and stability of removable prosthetic restoration for fully edentulous patients with severe alveolar bone resorption. When the prosthesis is manufactured without... -
- CITED
-
- Close
- SHARE
-
- Close
- Rehabilitation of a patient by converting poorly maintained fixed implant prosthesis into implant overdenture: a case report
-
Kim YK, Jeong CM, Yun MJ, Lee SH, Huh JB
- KMID: 2525015
- J Korean Acad Prosthodont.
- 2022 Jan;60(1):127-134.
- doi: 10.4047/jkap.2022.60.1.127
Among many contributing factors of implant failure, excessive loading and inflammation contribute mainly to increasing implant failure rate. Especially, poor oral hygiene around implants is one of the most common... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of dentures for a patient with unstable mandibular movements: A case report
-
Han SR, Jeong CM, Yun MJ, Huh JB, Lee SH, Lee H
- KMID: 2508382
- J Korean Acad Prosthodont.
- 2020 Oct;58(4):378-384.
- doi: 10.4047/jkap.2020.58.4.378
For patients with unstable mandibular movements and centric relation of the mandible due to long-term use of ill-fitting dentures, the successful fabrication of new dentures is challenging. Before fabrication new... -
- CITED
-
- Close
- SHARE
-
- Close
- Full mouth rehabilitation with vertical dimension increase in patient with severely worn out dentition: A case report
-
Kim DS, Jeong CM, Yun MJ, Huh JB, Lee H, Lee SH
- KMID: 2515223
- J Korean Acad Prosthodont.
- 2021 Apr;59(2):210-219.
- doi: 10.4047/jkap.2021.59.2.210
Excessive teeth wear can lead to reduced chewing efficiency, occlusal plane collapse, and facial changes. Full mouth rehabilitation with a change in vertical dimension may cause pain in the temporomandibular... -
- CITED
-
- Close
- SHARE
-
- Close
- COLORIMETRIC ANALYSIS OF COLOR DIFFERENCES BETWEEN DENTIN PORCELAINS
-
Kim CS, Lim JS, Jeong CM, Jeon YC
- KMID: 2321667
- J Korean Acad Prosthodont.
- 1999 Aug;37(4):425-432.
The purpose of this study is to evaluate the color differences that can exist between differnet brands of dentin porcelain having identical shade designations. The instrumental colorimetric technique was used... -
- CITED
-
- Close
- SHARE
-
- Close
- A MEASUREMENT OF DISPLACEMENTS OF CAST FRAMEWORK BY TORCH SOLDERING AND ELECTRIC SOLDERING TECHNIQUES
-
Jeon SW, Lim JS, Jeong CM, Jeon YC
- KMID: 1959582
- J Korean Acad Prosthodont.
- 1999 Dec;37(6):791-799.
The purpose of this study was to investigate the displacements of cast framework by torch soldering and electric soldering techniques. Specimen had two cylinders and connecting bar that had sectioned... -
- CITED
-
- Close
- SHARE
-
- Close
- Mandibular implant overdenture using milled bar attachment on implants with unfavorable fixture angulation: A case report
-
Seo YH, Jeon YC, Jeong CM, Yun MJ, Huh JB
- KMID: 2388219
- J Korean Acad Prosthodont.
- 2016 Oct;54(4):401-406.
- doi: 10.4047/jkap.2016.54.4.401
Implant overdenture exhibits higher retention, masticatory function, and patient's satisfaction compared to conventional dentures. Particularly, in treatment of severe alveolar bone resorption, implant overdenture can be considered as the first... -
- CITED
-
- Close
- SHARE
-
- Close
- Clinical accuracy of impression technique using digital superimposition ofcustomized abutment with subgingival margin: A case report
-
Kim JW, Jeong CM, Yun MJ, Lee SH, Lee H, Huh JB
- KMID: 2500030
- J Korean Acad Prosthodont.
- 2020 Apr;58(2):169-175.
- doi: 10.4047/jkap.2020.58.2.169
Traditionally, gingival retraction has been performed to obtain customized abutment impressions with subgingival margins of the implant supported prosthesis. However, gingival retraction may have side effects such as gingival recession and... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effect Of Soldering Indices For The Distortion Of Split Cast
-
Lee DW, Lim JS, Jeong CM, Chon YC
- KMID: 2045080
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):26-37.
The purpose of this study was to investigate the effect that three resin indexing materials had on the distortion of split cast in the procedures of solder indexing and block... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of Degassing Condition on Ceramic Bond Strength of Ni-Cr Alloys
-
Lee EH, Jeon YC, Jeong CM, Lim JS
- KMID: 2195998
- J Korean Acad Prosthodont.
- 2000 Aug;38(4):461-471.
This study evaluated the effect of dagassing on the ceramic bond strength of two Ni-Cr alloys under varying holding time at the upper limit temperature and atmospheric conditions. Metal specimens... -
- CITED
-
- Close
- SHARE
-
- Close
