Ventral and Dorsal Stabilization of the Thoracolumbar Spine by Crossed-screw Fixation

Lee, Seung Min; Choi, Chun Sik; Ju, Mun Bae

Abstract

For surgical stabilization of thoracolumbar instability either posterior transpedicular fixation or anterior interbody fixation is commonly performed. On some occasions, however, combined ventral and dorsal stabilization is needed, in which case surgery is usually performed in separate stages. To achieve this goal in a single operation, the authors used the crossed-screw fixation technique, with the pedicle screw-rod system, in eight patients. Their thoracolumbar instabilities were caused by trauma(n=6), tumor(n=1), and congenital deformity(n=1). In all patients, signs of myelo- and/or radiculopathy were present, and as this required extensive ventral and dorsal decompression, combined ventral and dorsal stabilizations was considered necessary. Surgery involved the lateral extracavitary approach: for dorsal stabilization, the conventional transpedicular fixation method, with pedicle screws of 5.5-mm diameter, was used. For ventral stabilization, interbody struts were grafted, using rib autograft or in the case of tumor fibula allograft, supplemented with transverse fixation of the vertebral body with pedicle screws of 7.5-mm diameter. The two stabilization systems, ventral and dorsal, were interconnected with cross-linking plates. Follow-up 12 to 26 (average 18) months after surgery revealed no hardware failures, and all patients showed improvement in their neurological functions during this period. Due to congenital deformity, graft dislodgement occurred in one patient. On the basis of these results the authors believe that the crossed-screw fixation technique is a viable option for three-dimensional stabilization of the thoracolumbar spine.