Clin Orthop Surg.  2014 Mar;6(1):110-116. 10.4055/cios.2014.6.1.110.

Future Bearing Surfaces in Total Hip Arthroplasty

• Chang JD

• KMID: 1737640
• DOI: http://doi.org/10.4055/cios.2014.6.1.110

Abstract

One of the most important issues in the modern total hip arthroplasty (THA) is the bearing surface. Extensive research on bearing surfaces is being conducted to seek an ideal bearing surface for THA. The ideal bearing surface for THA should have superior wear characteristics and should be durable, bio-inert, cost-effective, and easy to implant. However, bearing surfaces that are currently being implemented do not completely fulfill these requirements, especially for young individuals for whom implant longevity is paramount. Even though various new bearing surfaces have been investigated, research is still ongoing, and only short-term results have been reported from clinical trials. Future bearing surfaces can be developed in the following ways: (1) change in design, (2) further improvement of polyethylene, (3) surface modification of the metal, (4) improvement in the ceramic, and (5) use of alternative, new materials. One way to reduce wear and impingement in THA is to make changes in its design by using a large femoral head, a monobloc metal shell with preassembled ceramic liner, dual mobility cups, a combination of different bearing surfaces, etc. Polyethylene has improved over time with the development of highly crosslinked polyethylene. Further improvements can be made by reinforcing it with vitamin E or multiwalled carbon nanotubes and by performing a surface modification with a biomembrane. Surface modifications with titanium nitride or titanium niobium nitride are implemented to try to improve the metal bearings. The advance to the fourth generation ceramics has shown relatively promising results, even in young patients. Nevertheless, further improvement is required to reduce fragility and squeaking. Alternative materials like diamond coatings on surfaces, carbon based composite materials, oxidized zirconium, silicon nitride, and sapphire are being sought. However, long-term studies are necessary to confirm the efficacy of these surfaces after enhancements have been made with regard to fixation technique and implant quality.

Keyword

Hip; Arthroplasty; Bearing surface; Wear

MeSH Terms

Arthroplasty, Replacement, Hip/*instrumentation
*Hip Prosthesis
Humans
Metals
*Prosthesis Design
Surface Properties
*Weight-Bearing
Metals

Reference

1. Howie DW, Holubowycz OT, Middleton R. Large Articulation Study Group. Large femoral heads decrease the incidence of dislocation after total hip arthroplasty: a randomized controlled trial. J Bone Joint Surg Am. 2012; 94(12):1095–1102.

2. Dower B, Grobler G, Nortje M, Reid C. Deltamotion. Bone Joint J. 2013; 95:Suppl 14. 54.

3. Vielpeau C, Lebel B, Ardouin L, Burdin G, Lautridou C. The dual mobility socket concept: experience with 668 cases. Int Orthop. 2011; 35(2):225–230.

4. Guyen O, Pibarot V, Vaz G, Chevillotte C, Bejui-Hugues J. Use of a dual mobility socket to manage total hip arthroplasty instability. Clin Orthop Relat Res. 2009; 467(2):465–472.

5. Williams S, Al-Hajjar M, Isaac GH, Fisher J. Comparison of ceramic-on-metal and metal-on-metal hip prostheses under adverse conditions. J Biomed Mater Res B Appl Biomater. 2013; 101(5):770–775.

6. Isaac GH, Brockett C, Breckon A, et al. Ceramic-on-metal bearings in total hip replacement: whole blood metal ion levels and analysis of retrieved components. J Bone Joint Surg Br. 2009; 91(9):1134–1141.

7. Schouten R, Malone AA, Tiffen C, Frampton CM, Hooper G. A prospective, randomised controlled trial comparing ceramic-on-metal and metal-on-metal bearing surfaces in total hip replacement. J Bone Joint Surg Br. 2012; 94(11):1462–1467.

8. Beksac B, Salas A, Gonzalez Della Valle A, Salvati EA. Wear is reduced in THA performed with highly cross-linked polyethylene. Clin Orthop Relat Res. 2009; 467(7):1765–1772.

9. Chumakov M, Silverman J, AI-Sheikhly M. Nitroxides as radical scavengers in UHMWPE. In : The 4th UHMWPE International Meeting; 2009 Sep 16-18; Torino, Italy.

10. King R, Narayan VS, Ernsberger C. Characterisation of gamma-irradiated UHMWPE stabilized with a Hindered-Phenol antioxidant. In : The 55th Annual Meeting of the Orthopaedic Research Society; 2009 Feb 22-24; Las Vegas, NV, USA.

11. He S, Le KP, Blitz JW. Anthocyanin doped UHMWPE: oxidation, wear and mechanical properties. In : The 55th Annual Meeting of the Orthopaedic Research Society; 2009 Feb 22-24; Las Vegas, NV, USA.

12. Bladen CL, Tzu-Yin L, Fisher J, Tipper JL. In vitro analysis of the cytotoxic and anti-inflammatory effects of antioxidant compounds used as additives in ultra high-molecular weight polyethylene in total joint replacement components. J Biomed Mater Res B Appl Biomater. 2013; 101(3):407–413.

13. Micheli BR, Wannomae KK, Lozynsky AJ, Christensen SD, Muratoglu OK. Knee simulator wear of vitamin E stabilized irradiated ultrahigh molecular weight polyethylene. J Arthroplasty. 2012; 27(1):95–104.

14. Oral E, Muratoglu OK. Vitamin E diffused, highly cross-linked UHMWPE: a review. Int Orthop. 2011; 35(2):215–223.

15. Rowell SL, Micheli BR, Wannomae KK, Malchau H, Muratoglu OK. In vivo performance of highly cross-linked UHMWPE. In : The 5th UHMWPE International Meeting; 2011 Sep 22-23; Philadelphia, PA, USA.

16. van der Veen HC, van den Akker-Scheek I, Bulstra SK, van Raay JJ. Wear, bone density, functional outcome and survival in vitamin E-incorporated polyethylene cups in reversed hybrid total hip arthroplasty: design of a randomized controlled trial. BMC Musculoskelet Disord. 2012; 13:178.

17. Ruan SL, Gao P, Yang XG, Yu TX. Toughening high performance ultrahigh molecular weight polyethylene using multiwalled carbon nanotubes. Polymer. 2003; 44(19):5643–5654.

18. Kanagaraj S, Mathew MT, Fonseca A, Oliveira MS, Simoes JA, Rocha LA. Tribological characterisation of carbon nanotubes/ultrahigh molecular weight polyethylene composites:the effect of sliding distance. Int J Surf Sci Eng. 2010; 4(4-6):305–321.

19. Ishihara K, Iwasaki Y, Ebihara S, Shindo Y, Nakabayashi N. Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance. Colloids Surf B Biointerfaces. 2000; 18(3-4):325–335.

20. Kyomoto M, Moro T, Miyaji F, et al. Effects of mobility/immobility of surface modification by 2-methacryloyloxyethyl phosphorylcholine polymer on the durability of polyethylene for artificial joints. J Biomed Mater Res A. 2009; 90(2):362–371.

21. Moro T, Kawaguchi H, Ishihara K, et al. Wear resistance of artificial hip joints with poly(2-methacryloyloxyethyl phosphorylcholine) grafted polyethylene: comparisons with the effect of polyethylene cross-linking and ceramic femoral heads. Biomaterials. 2009; 30(16):2995–3001.

22. Pappas MJ, Makris G, Buechel FF. Titanium nitride ceramic film against polyethylene: a 48 million cycle wear test. Clin Orthop Relat Res. 1995; (317):64–70.

23. Lee SB, Choi JY, Park WW, et al. A study of TiN-coated metal-on-polymer bearing materials for hip prosthesis. Met Mater Int. 2010; 16(4):679–686.

24. Harman MK, Banks SA, Hodge WA. Wear analysis of a retrieved hip implant with titanium nitride coating. J Arthroplasty. 1997; 12(8):938–945.

25. Raimondi MT, Pietrabissa R. The in-vivo wear performance of prosthetic femoral heads with titanium nitride coating. Biomaterials. 2000; 21(9):907–913.

26. Serro AP, Completo C, Colaco R, et al. A comparative study of titanium nitrides, TiN, TiNbN and TiCN, as coatings for biomedical applications. Surf Coat Technol. 2009; 203(24):3701–3707.

27. Woodnutt D, Hamelynck K, Woering R. Low metal ion release in patients at up to 8 years following titanium niobium nitride (TiNbN) surface treated metal-on-metal hip arthroplasty. J Bone Joint Surg Br. 2012; 94:Suppl XLI. 140.

28. Bongaerts G, Jensen K, Denda A, Schneider S. Limited increase of metal ion concentration in patients with a ceramic coated surface replacement. Der Unfallchirurg. 2009; 112:Suppl 1. 13.

29. Chevillotte C, Pibarot V, Carret JP, Bejui-Hugues J, Guyen O. Nine years follow-up of 100 ceramic-on-ceramic total hip arthroplasty. Int Orthop. 2011; 35(11):1599–1604.

30. Porat M, Parvizi J, Sharkey PF, Berend KR, Lombardi AV Jr, Barrack RL. Causes of failure of ceramic-on-ceramic and metal-on-metal hip arthroplasties. Clin Orthop Relat Res. 2012; 470(2):382–387.

31. Hauert R, Falub CV, Thorwarth G, et al. Retrospective life-time estimation of failed and explanted diamond-like carbon coated hip joint balls. Acta Biomater. 2012; 8(8):3170–3176.

32. Lappalainen R, Selenius M, Anttila A, Konttinen YT, Santavirta SS. Reduction of wear in total hip replacement prostheses by amorphous diamond coatings. J Biomed Mater Res B Appl Biomater. 2003; 66(1):410–413.

33. Thomas V, Halloran BA, Ambalavanan N, Catledge SA, Vohra YK. In vitro studies on the effect of particle size on macrophage responses to nanodiamond wear debris. Acta Biomater. 2012; 8(5):1939–1947.

34. Howling GI, Sakoda H, Antonarulrajah A, et al. Biological response to wear debris generated in carbon based composites as potential bearing surfaces for artificial hip joints. J Biomed Mater Res B Appl Biomater. 2003; 67(2):758–764.

35. Good V, Ries M, Barrack RL, Widding K, Hunter G, Heuer D. Reduced wear with oxidized zirconium femoral heads. J Bone Joint Surg Am. 2003; 85:Suppl 4. 105–110.

36. Lewis P, Bogoch E, Olsen M, Schemitsch E, Waddell J. Comparison of mid-term clinical outcomes following primary total hip arthroplasty with oxinium versus cobalt chrome femoral heads. J Bone Joint Surg Br. 2010; 92(Supp IV):524.

37. Jaffe WL, Strauss EJ, Cardinale M, Herrera L, Kummer FJ. Surface oxidized zirconium total hip arthroplasty head damage due to closed reduction effects on polyethylene wear. J Arthroplasty. 2009; 24(6):898–902.

38. Bal BS, Khandkar A, Lakshminarayanan R, Clarke I, Hoffman AA, Rahaman MN. Fabrication and testing of silicon nitride bearings in total hip arthroplasty: winner of the 2007 "HAP" PAUL Award. J Arthroplasty. 2009; 24(1):110–116.

39. Olofsson J, Grehk TM, Berlind T, Persson C, Jacobson S, Engqvist H. Evaluation of silicon nitride as a wear resistant and resorbable alternative for total hip joint replacement. Biomatter. 2012; 2(2):94–102.

40. Mamalis AG, Ramsden JJ, Grabchenko AI, Lytvynov LA, Filipenko VA, Lavrynenko SN. A novel concept in for the manufacture of individual sapphire-metallic hip joint endoprostheses. J Biol Phys Chem. 2006; 6(3):113–117.