J Korean Acad Prosthodont.
2002 Apr;40(2):184-192.
A Study on the Abrasion Resistance and Surface Roughness of the Dental Stones
- Affiliations
-
- 1Research Institute of Oral Science, College of Dentistry, Kangnung National University, Korea.lila@kangnung.ac.kr
- 2Department of Polymer Engineering, University of Suwon, Korea.
- 3Research Institute of Dental Materials, College of Dentistry, Yonsei University, Korea.
Abstract
- The purpose of this study was to investigate the abrasion resistance and surface roughness of conventional dental stones and improved dental stones and newly developed dental stones. Materials included in this study were several dental stones and newly developed dental stone; 2 type III, 6 type IV(including newly developed dental stone),1 type V Ten specimens for each material,total ninety specimens were made. Each specimen was subjected to 50 complete cycle abrasion under constant load 0.42N at speed of 6mm per sec.The depth after abrasion test was measured for each specimen. Surface roughness before and after abrasion test was compared.The results were as follows ; 1.The resin containing die materials such as Tuff Rock and Resin Rock had superior abrasion resistance. 2.Type IV,V Surface roughnessdental stone exhibited greater abrasion resistance than Type IIIdental stone. 3.The results of the surface roughness showed similar pattern with the abrasion resistance.
Keyword
- Full Text Links
-
- Actions
-
Cited
- CITED
-
- Close
- Share
-
- Similar articles
-
- A study on surface roughness of metals according to finishing and polishing procedures: an atomic force microscope analysis
- Evaluation on the abrasion resistance of a surface sealant
- Strength of glass fiber reinforced PMMA resin and surface roughness change after abrasion test
- The effect of repeated surface treatment of zirconia on its bond strength to resin cement
- The effect of repeated firings on the color change and surface roughness of dental ceramics
