- Fabrication of palatal lift prosthesis using thermoplastic resin for a patient with velopharyngeal insufficiency
-
Jung HJ, Kim JH, Lee SH, Park YB
- KMID: 2344869
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):286-290.
- doi: 10.4047/jkap.2016.54.3.286
Recently, flexible removable prosthesis with thermoplastic resin clasp has increasingly become popular. In comparison with conventionally used acrylic resin, thermoplastic resin has lower flexural strength and elastic modulus. Thus, flexible... -
- CITED
-
- Close
- SHARE
-
- Close
- Rehabilitation using twin-stage method for a Sjögren's syndrome patient with severe discoloration and attrition on upper and lower anterior teeth
-
Lee SK, Yang HS, Park SW, Lim HP, Yun KD
- KMID: 2344870
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):291-297.
- doi: 10.4047/jkap.2016.54.3.291
Patients with Sjögren's syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony,... -
- CITED
-
- Close
- SHARE
-
- Close
- Oral rehabilitation of a patient with severely worn dentition using monolithic zirconia
-
Park JS, Ryu JJ
- KMID: 2344867
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):273-279.
- doi: 10.4047/jkap.2016.54.3.273
Severe tooth wear may lead to pathological changes of pulp, imbalance in occlusion as well as functional and esthetic problems. In this case, 34-year-old male came to the hospital because... -
- CITED
-
- Close
- SHARE
-
- Close
- Mandibular implant supported overdentures with two different mini-implant systems: A case report
-
Park JH, Lee JY, Ryu JJ, Shin SW
- KMID: 2344866
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):267-272.
- doi: 10.4047/jkap.2016.54.3.267
This case report describes the treatment of two fully edentulous patients with mini-implant overdentures using different implant systems on narrow mandibular alveolar bone ridge. They were complaining about discomfort and... -
- CITED
-
- Close
- SHARE
-
- Close
- Superimposition: a simple method to minimize occlusal adjustment of monolithic restoration
-
Choi C, Kim S
- KMID: 2344864
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):253-258.
- doi: 10.4047/jkap.2016.54.3.253
The development of translucent zirconia enabled clinicians to choose a monolithic zirconia crown as one treatment modality in the posterior dentition. Careful occlusal adjustments are recommended for monolithic zirconia crowns... -
- CITED
-
- Close
- SHARE
-
- Close
- Hybrid telescopic double crown denture on maxillary few remaining teeth and 2 mandibular implants in case of failed implant overdenture
-
Ha SJ, Cho JH
- KMID: 2344863
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):246-252.
- doi: 10.4047/jkap.2016.54.3.246
Double crown prostheses can be used in patients who have a few remaining teeth and poor periodontal condition because of secondary splinting of abutments, vertical loading, decrease of the length... -
- CITED
-
- Close
- SHARE
-
- Close
- Mandibular implant-supported overdenture using CAD-CAM Konus type attachment: A case report
-
Park JH, Kim IJ, Kim KA, Song KY, Seo JM
- KMID: 2344865
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):259-266.
- doi: 10.4047/jkap.2016.54.3.259
In edentulous mandible, implant supported overdenture was considered as a first treatment option. Konus type attachment supplies rigid support and cross arch stabilization so that more favorable force transmission and... -
- CITED
-
- Close
- SHARE
-
- Close
- Clinical evaluation of the removable partial dentures with implant fixed prostheses
-
Kang SH, Kim SK, Heo SJ, Koak JY, Lee JH, Park JM
- KMID: 2344862
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):239-245.
- doi: 10.4047/jkap.2016.54.3.239
PURPOSE: The purpose of this study was to identify clinical complications in removable partial denture (RPD) with implant-supported surveyed prostheses, and to analyze the factors associated with the complications such... -
- CITED
-
- Close
- SHARE
-
- Close
- Full-mouth rehabilitation of the patient with severe tooth wear using all ceramic restorations
-
Kim TS, Lee JH, Lee CW, Lee WS, Lee SY
- KMID: 2344872
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):306-313.
- doi: 10.4047/jkap.2016.54.3.306
Tooth wear is known as a normal physiological process which gradually progresses. It is reported that vertical dimension can be kept stable because amount of physiologically worn loss could be... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of marginal and internal gap under model-free monolithic zirconia restoration fabricated by digital intraoral scanner
-
Lee JW, Park JM
- KMID: 2344858
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):210-217.
- doi: 10.4047/jkap.2016.54.3.210
PURPOSE: The aim of this study was to evaluate the marginal and internal adaptation of monolithic zirconia restoration made without physical model by digital intraoral scanner. MATERIALS AND METHODS: A prospective... -
- CITED
-
- Close
- SHARE
-
- Close
- Clinical application of implant assisted removable partial denture to patient who underwent mandibular resection with oral cancer: A case report
-
Yoon YS, Han DH, Kim HJ, Kim JH
- KMID: 2344868
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):280-285.
- doi: 10.4047/jkap.2016.54.3.280
Mandible defects could be caused by congenital malformations, trauma, osteomyelitis, tumor resection. If large areas are included for reconstruction, those are primarily due to tumor resection defects. The large jaw... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of different adhesive systems and post surface treatments on the push-out bond strengths of fiber-reinforced post
-
Kim MW, Ahn JH, Kim LK, Shim HW
- KMID: 2344859
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):218-225.
- doi: 10.4047/jkap.2016.54.3.218
PURPOSE: The purpose of this study was to evaluate the push-out bond strength of glass-fiber post cemented with different adhesive systems and surface treatments. MATERIALS AND METHODS: 160 tooth samples made... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant esthetic restoration with bone graft in the extended maxillary anterior area: A case report
-
Jeong JW, Park SY, Kim YY, Park WH, Lee YS
- KMID: 2344871
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):298-305.
- doi: 10.4047/jkap.2016.54.3.298
The maxillary anteriors play an important role in esthetics. Therefore after extraction, it is crucial to preserve the hard tissue and soft tissue in order to promote esthetics of restoration.... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of crown designs of different dental occupational groups, using CAD-CAM
-
Kim T, Kim JE, Lee AR, Park YB
- KMID: 2344861
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):234-238.
- doi: 10.4047/jkap.2016.54.3.234
PURPOSE: Increasing use of computer aided design-computer aided manufacturing (CAD-CAM) system and number of design software made design of restoration easy and quick. Outcome of restoration has been dependent on... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of dental CAD-CAM hybrid restorative materials repaired with composite resin
-
Moon YH, Lee J, Lee MG
- KMID: 2344856
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):193-202.
- doi: 10.4047/jkap.2016.54.3.193
PURPOSE: This study was performed in order to assess the effect of the surface treatment methods and the use of bonding agent on the shear bond strength (SBS) between the... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of enamel matrix derivatives on the proliferation and the release of growth factors of human periodontal ligament cells
-
Jung GU, Pang EK
- KMID: 2344857
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):203-209.
- doi: 10.4047/jkap.2016.54.3.203
PURPOSE: Stimulating the proliferation and migration of periodontal ligament cells (PDLCs) has become the main goal of periodontal regeneration. To accomplish this goal, regeneration procedures have been developed, but results... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of micro CT and cross-section technique for evaluation of marginal and internal fit of lithium disilicate crowns
-
Ko IS, Kim JM, Cho HW
- KMID: 2344860
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):226-233.
- doi: 10.4047/jkap.2016.54.3.226
PURPOSE: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different... -
- CITED
-
- Close
- SHARE
-
- Close
