- The effect of screw tightening sequence and tightening method on the detorque value in implant-supported superstructure
-
Choi JH, Kim CW, Lim YJ, Kim MJ, Lee SH
- KMID: 2000560
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):653-664.
STATEMENT OF PROBLEM: The screw detorque value is a measure of the preload remaining in the screw just before detorquing. PURPOSE: This study evaluated the effect of different screw tightening sequences... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of size and shape of retention element on composite to metal bond strength
-
Lee YJ, Jeon YC, Jeong CM
- KMID: 2000561
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):665-674.
PURPOSE: The purpose of this study was to investigate the effect of size and shape of retention element on the bond strength of indirect composite resin and metal. MATERIAL AND METHOD:... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the difference of the sagittal condylar guidance by semi-adjustable articulator and axiograph
-
Park GH, Lee SB, Bak J, Choi DG
- KMID: 2000564
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):696-705.
STATEMENT OF PROBLEM: In the Protar articulator, the models are almost parallel with the Camper's plane. The ultrasonic-based ARCUSdigma system is basis for the determination of dynamic function parameters with... -
- CITED
-
- Close
- SHARE
-
- Close
- 3D finite element analysis of overdenture stability and stress distribution on mandibular implant-retained overdenture
-
Hong HR, Choi DG, Bak J, Kwon KR
- KMID: 2000558
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):633-643.
STATEMENT OF PROBLEM: Recently there are on an increasing trend of using implants -especially in edentulous mandible of severly alveolar bone recessed. PURPOSE: The aim of this study was to analyze... -
- CITED
-
- Close
- SHARE
-
- Close
- Mechanical properties of tin coated film with various coating thickness on titanium alloy
-
Lee JY, Oh DJ, Kim HJ, Chung CH
- KMID: 2000562
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):675-686.
STATEMENT OF PROBLEM: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial PURPOSEs. When TiN coating applied... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation and development of digital device for measuring proximal tooth contact tightness
-
Choi WJ, Kim KH, Kim JA, Kang DW, Oh SH
- KMID: 2000563
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):687-695.
STATEMENT OF PROBLEM: The proper contact relation between adjacent teeth in each arch plays an important role in the stability and maintenance of the integrity of the dental arches. Proximal... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of autoclave sterilization and reuse of Smartpeg(TM) on the implant stability quotient (ISQ) measurement
-
Kang IH, Kim MJ, Lim YJ, Kim CW
- KMID: 2000559
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):644-652.
STATEMENT OF PROBLEM: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of titanium surface coating on ceramic adhesion
-
Kim YM, Kim HS, Lee KM, Lee DJ, Oh GJ, Lim HP, Seo YJ, Park SW
- KMID: 2000555
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):601-610.
STATEMENT OF PROBLEM: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. PURPOSE: This study... -
- CITED
-
- Close
- SHARE
-
- Close
- The influence of dentin desensitizer to shear bond strength of dental cements
-
Na YH, Oh NS, Yoo JH
- KMID: 2000553
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):579-588.
STATEMENT OF PROBLEM: A tenderness of the dentin after tapering of teeth for dental prosthesis is a common phenomenon. In practice, the alternative desensitizer may be used for minor pain... -
- CITED
-
- Close
- SHARE
-
- Close
- Stress distribution of periodontally involved teeth restored with various posts: three-dimensional finite element study
-
Jeong HJ, Yoo JH, Oh NS, Kim HS
- KMID: 2000552
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):567-578.
STATEMENT OF PROBLEM: The endodontically treated tooth is generally restored with post and core, owing to the brittle and the loss of large amount of tooth structure. As periodontal treatment... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of denture base surface pretreatments on the tensile bond strength between a resilient liner and a processed denture base resin
-
Yoon MC, Jeong CM, Jeon YC
- KMID: 2000557
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):621-632.
STATEMENT OF PROBLEM: The failure of adhesion between the resilient denture liner and the denture base is a serious problem in clinic. PURPOSE: The PURPOSE of this study was to evaluate... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface modification on bond strength in titanium-porcelain system
-
Roh SW, Vang MS, Yang HS, Park SW, Park HO, Lim HP
- KMID: 2000554
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):589-600.
STATEMENT OF PROBLEM: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature.... -
- CITED
-
- Close
- SHARE
-
- Close
- An in-vitro wear study of indirect composite resins against human enamel
-
Yi HJ, Jeon YC, Jeong CM, Jeong HC
- KMID: 2000556
- J Korean Acad Prosthodont.
- 2007 Oct;45(5):611-620.
STATEMENT OF PROBLEM: Second-generation indirect composite resins have been improved flexural strength, compressive strength, hydrolytic degradation resistance, wear resistance compared to first-generation indirect composite resins, but there are still some... -
- CITED
-
- Close
- SHARE
-
- Close
