- Removal torque of bicortically stabilized RBM(resorbable blast media) pin implants in rabbit tibia
-
Kim KS, Suh KW, Lee RS, Ryu JJ
- KMID: 2000652
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):722-733.
STATEMENT OF PROBLEM: The use of small diameter implants having less than 3 mm in diameter were restricted because of lack of bonding strength to bone. PURPOSE: The purpose of this... -
- CITED
-
- Close
- SHARE
-
- Close
- The comparison of initial retentive force in different double crown systems
-
Kwon HB, Roh YH, Lee SH
- KMID: 2000647
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):677-682.
STATEMENT OF PROBLEM: Various double crown systems have been used with removable partial dentures in the clinical field. Although retentive force between inner and outer crown are affected by several... -
- CITED
-
- Close
- SHARE
-
- Close
- Fatigue resistance of dental implants treated with laser method
-
Park EY
- KMID: 2000653
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):734-739.
STATEMENT OF PROBLEM: Many surface processing methods of dental implant have been developed, the laser processing is one of them. PURPOSE: This study was to investigate in vitro the fatigue resistance... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study on the dimensional change of the different denture bases
-
Kim MJ, Kim CW
- KMID: 2000651
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):712-721.
STATEMENT OF PROBLEM: Acrylic resin is most commonly used for denture bases. However, acrylic resin has week points of volumetric shrinkage during polymerization that reduces denture fit. The expandability of... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on mechanical properties of TiN, ZrN and WC coated film on the titanium alloy surface
-
Oh DJ, Kim HJ, Chung CH
- KMID: 2000654
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):740-750.
STATEMENT OF PROBLEMS: In an attempt to reduce screw loosening, dry lubricant coatings such as pure gold or tefron have been applied to the abutment screw. However, under repeated tightening... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of investment/ceramic interaction layer on interfacial toughness of body ceramic bonded to lithia-based ceramic
-
Park JM
- KMID: 2000648
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):683-689.
STATEMENT OF PROBLEM: Interfacial toughness is important in the mechanical property of layered dental ceramics such as core-veneered all-ceramic dental materials. The interfaces between adjacent layers must be strongly... -
- CITED
-
- Close
- SHARE
-
- Close
- Tensile bond strength between elastomeric impression materials and tray resins depending on the thickness of the tray adhesive
-
Kim TW, Moon HS, Lee KW, Chung MK
- KMID: 2000650
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):699-711.
STATEMENT OF PROBLEM: Elastomeric impression materials have been widely used to obtain an accurate impression. However there have not been enough studies on the influence of the thickness of the... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro study on exothermic reaction of polymer-based provisional crown and fixed partial denture materials measured by differential scanning calorimetry
-
Ko MJ, Pae AR, Kim SH
- KMID: 2000649
- J Korean Acad Prosthodont.
- 2006 Dec;44(6):690-698.
STATEMENT OF PROBLEMS: The heat produced during polymerization of polymer-based provisional materials may cause thermal damage to the vital pulp. PURPOSE: This study was performed to evaluate the exotherm reaction of... -
- CITED
-
- Close
- SHARE
-
- Close
