- Finite element approach to investigate the influence of the design configuration of the ITI solid implant on the bone stresses during the osseointegration process
-
Cha SB, Lee KB, Jo KH
- KMID: 2195711
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):217-228.
STATEMENT OF PROBLEM: Standard type of ITI solid implant model in the 6.2mm thick jaw bone was axisymmetrically modelled for finite element stress analyses. PURPOSE: Primary objective was to investigate the... -
- CITED
-
- Close
- SHARE
-
- Close
- Fracture strength of zirconia monolithic crowns
-
Jeong HC
- KMID: 2195705
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):157-164.
PURPOSE: The purpose of this study was to compare the fracture strength of the zirconia monolithic all-ceramic crowns according to the thickness(0.5 mm, 0.8 mm, 1.1 mm) and IPS Empress... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of sprue design on the internal porosity of titanium castings
-
Heo SM, Jeon YC, Jeong CM, Lim JS, Jeong HC
- KMID: 2195704
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):147-156.
STATEMENT OF PROBLEM: The high melting temperature and chemical reactivity of titanium necessitates casting machines different from those used in conventional casting. Despite the new developments in Ti casting systems,... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional finite element analysis of stress distribution and preload of different connection types implant with initial clamping
-
Lee BH, Chun HJ, Lee SH, Han CH
- KMID: 2195709
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):197-206.
STATEMENT OF PROBLEM: One of common problems associated with single teeth dental implant prosthetic is the loosening of screws that retain the implants. PURPOSE: The maintenance of screw joint stability is... -
- CITED
-
- Close
- SHARE
-
- Close
- An optimization of onebody type implant system considering various design parameters
-
Choi JM, Chun HJ, Lee SH, Han CH
- KMID: 2195708
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):185-196.
STATEMENT OF PROBLEM: The researches on the influence of design variables on the stress distribution in cortical and trabecular bones and on optimal design for implant system were limited. PURPOSE: The... -
- CITED
-
- Close
- SHARE
-
- Close
- A systematic implant treatment planning and concepts for clinical success
-
Jeong SM, Kim SH, Yoo JH
- KMID: 2195713
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):243-249.
STATEMENT OF PROBLEM: It is important to have a correct presurgical treatment plan before any implant surgery. It must contain substantial information about the patient concerned. However, the standard classification... -
- CITED
-
- Close
- SHARE
-
- Close
- The influence of implant fixture-abutment connection design on screw loosening
-
Mun YS, Park SW, Vang MS, Yang HS, Park HO
- KMID: 2195707
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):174-184.
PURPOSE: Current trend in implant dentistry is changing from external connection to internal connection. To evaluate the splinting of external and internal connection implant on screw loosening, 2-units prosthesis was... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of taper and surface area of inner crown on the retentive force of electroformed outer crown
-
Kang WK, Lim JS, Jeon YC, Jeong CM, Jeong HC
- KMID: 2195706
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):165-173.
PURPOSE: With gold electroforming system for the double crown, the secondary crown is electroformed directly onto the primary crown. An even thick layer of high precision can be acquired. It... -
- CITED
-
- Close
- SHARE
-
- Close
- The evaluation of cytotoxicity and biocompatibility of Ti-Ta-Nb-base alloy
-
Cui DZ, Vang MS, Yoon TR
- KMID: 2195714
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):250-263.
STATEMENT OF PROBLEM: Ti-alloy has been used widely since it was produced in the United States in 1947 because it has high biocompatibility and anticorrosive characteristics. PURPOSE: The pure titanium, however,... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the various implant systems using the finite element stress analysis
-
Yu SH, Park WH, Park JJ, Lee YS
- KMID: 2195710
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):207-216.
STATEMENT OF PROBLEM: To conduct a successful function of implant prosthesis in oral cavity for a long time, it is important that not only structure materials must have the biocompatibility,... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of tungsten carbide/carbon coating on the preload of implant abutment screws
-
Choi JU, Jeong CM, Jeon YC, Lim JS, Jeong HC, Eom TG
- KMID: 2195712
- J Korean Acad Prosthodont.
- 2006 Apr;44(2):229-242.
STATEMENT OF PROBLEM: In order to increase preload with reducing the friction coefficient, abutment screws coated with pure gold and Teflon as dry lubricant coatings have been introduced. But the... -
- CITED
-
- Close
- SHARE
-
- Close
