- THE RETRIEVABILITY OF CEMENTATION TYPE IMPLANT ABUTMENT BY SURFACE TREATMENTS AND TYPES OF CEMENTS
-
Lee JB
- KMID: 1907062
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):651-657.
This study was performed to investigate the retrievability of the cementation type implant abutments. The cements used in this study were Cavitec, Tembond and Zine Phosphate Cement. The types of... -
- CITED
-
- Close
- SHARE
-
- Close
- MECHANICAL PROPERTIES OF TITANIUM CONNECTORS TREATED BY VARIOUS WELDING TECHNIQUES
-
Lee SY, Chang IT, Heo SJ, Yim SH
- KMID: 1907055
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):545-566.
The use of pure titanium and titanium alloys have been increased recently in fixed, removable prosthodontics and implant fields as a framework. But when they were used for superstructures of... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY ON ACCUARACY AND DIMENSIONAL STABILITY ACCORDING TO IMPRESSION METHODS
-
Lee JY, Lim JH, Cho IH
- KMID: 1907056
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):567-580.
Accurate reproduction of intraoral tissue is essential in the fabrication of fixed prosthesis. This selection of impression material and method is very important. In this study, vinyl polysiloxane type impression... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY OF INTERFACE AND CORROSION BEHAVIOR BETWEEN IMPLANT ABUTMENT AND CASTING GOLD ALLOY
-
Son MK, Ma JS, Chung CH
- KMID: 1907064
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):672-686.
The purpose of this study was to compare the casting problem and corrosion behavior in two types of HL Hexed abutments of the Steri-Oss system : gold/plastic coping and gold... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY ON THE PHYSICAL CHARACTERISTICS OF THE THREE COMMONLY USED DIE SPACING MATERIALS
-
Moon HS, Kim JJ
- KMID: 1907061
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):640-650.
As an optimal quality of the restorations, there should be a least amount of seating discrepancy between the casting and abutment teeth. However, high viscosity of the cementing medium and... -
- CITED
-
- Close
- SHARE
-
- Close
- EFFECTS OF BONE ENGAGEMENT TYPE&IMPLANT LENGTH ON STRESS DISTRIBUTION: A THREE DIMENSIONAL FINITE ELEMENT ANALYSIS
-
Choi JH, Han JS, Seo KY, Choi JH
- KMID: 1907065
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):687-697.
A finite element analysis has been utilized to analyze stress and strain fields and design a new configuration in orthopedics and implant dentistry. Load transfer and stress analysis at implant... -
- CITED
-
- Close
- SHARE
-
- Close
- EFFECTS OF AGING AND THERMAL CYCLING ON THE BIAXIAL RLEXURE STRENGTH OF VENEERING RESIN COMPOSITES FOR CROWN
-
Jeong GY, Ha IS, Song KY
- KMID: 1907058
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):597-606.
This study was performed to evaluate the effect of aging and thermal cycling on the biaxial flexure strength of four commercially available veneering resin composites for crown(Dentacolor : DC, Artglass... -
- CITED
-
- Close
- SHARE
-
- Close
- THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE EFFECT OF CORTICAL ENGAGEMENT ON IMPLANT LOAD TRANSFER IN POSTERIOR MANDIBLE
-
Jeong CM
- KMID: 1907059
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):607-619.
Cortical support is an important factor, as the engagement of the fixture in strong compact bone offers an increased load-carrying capacity and initial stability. Because of the poor bone quality... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY OF THE STRESS DISTRIBUTION OF THE ABUTMENT AND SUPPORTING TISSUES ACCORDING TO THE SLOPES AND TYPES OF GUIDING PLANES OF THE LAST ABUTMENT IN DISTAL EXTENSION REMOVABLE PARTIAL DENTURE USING THREE DIMENSIONAL FINITE ELEMENTANALYSIS METHOD
-
Kim YK, Lee CH, Jo KH
- KMID: 1907057
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):581-596.
The purpose of this study was to investigate the stress distribution of the abutment and supporting tissues according tot he slopes and types of the guiding plane of distal extension... -
- CITED
-
- Close
- SHARE
-
- Close
- THE EFFECT OF SURFACE TREATMENT ON FRACTURE STRENGTH OF DENTAL CERAMICS
-
Lee SW, Lee SH, Yang JH, Chung HY
- KMID: 1907063
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):658-671.
The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all ceramic restorations. Zine phosphate... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY ON THE BOND STRENGTH OF REINFORCED INDIRECT COMPOSITE RESINS TO DENTAL ALLOYS
-
Yoon DJ, Shin SW, Suh YW, Lim HN
- KMID: 1907060
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):620-639.
Indirect composite resin are used as an popular effective esthetic material in prosthetic dentistry, often with metallic substructure that provides support for restorations. Recently, new indirect composite resins as a... -
- CITED
-
- Close
- SHARE
-
- Close
- ADHESION OF CANDIDA ALBICANS ISOLATES TO ACRYLIC RESIN IN RELATION TO SALIVARY GLYCOPROTEINS IN DENTURE STOMATITIS PATIENTS
-
Oh JH, Choi BB, Choi DG, Woo YH, Lee SB, Kwon KR
- KMID: 1907066
- J Korean Acad Prosthodont.
- 1999 Oct;37(5):698-713.
Adherence of Candida albicans(C. albicans) to the surface of a denture is believed to be an initial and essential step in the formation of denture-induced stomatitis. Previous studies have provided... -
- CITED
-
- Close
- SHARE
-
- Close
