- Comparison of the accuracy of an ultrasonic-based jaw tracking device with conventional electronic tracking device
-
Gu X, Hu T, Zhang Z, He F, Shi J, Yang H
- KMID: 2565613
- J Adv Prosthodont.
- 2025 Feb;17(1):47-58.
- doi: 10.4047/jap.2025.17.1.47
PURPOSE This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements. MATERIALS AND METHODS Twenty-six subjects with normal occlusion... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of interference from eccentric movements of dental crowns fabricated via dynamic jaw motion tracking and conventional methods: a double-blind clinical study
-
Park MH, Son K, Jin MU, Kim SY, Lee KB
- KMID: 2565612
- J Adv Prosthodont.
- 2025 Feb;17(1):36-46.
- doi: 10.4047/jap.2025.17.1.36
PURPOSE The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of template design on the accuracy of static computer-assisted implant surgery
-
Chung J, Park J, Son H, Hong SJ, Pae A
- KMID: 2565611
- J Adv Prosthodont.
- 2025 Feb;17(1):22-35.
- doi: 10.4047/jap.2025.17.1.22
PURPOSE This study aimed to evaluate the accuracy of static computer-assisted implant surgery (s-CAIS) by comparing the planned and actual positions of implants placed in a partially edentulous model using surgical... -
- CITED
-
- Close
- SHARE
-
- Close
- Verification of the accuracy and design time of crowns designed with artificial intelligence
-
Nagata K, Inoue E, Nakashizu T, Seimiya K, Atsumi M, Kimoto K, Kuroda S, Hoshi N
- KMID: 2565610
- J Adv Prosthodont.
- 2025 Feb;17(1):1-10.
- doi: 10.4047/jap.2025.17.1.1
PURPOSE This study examines the potential of computer-aided design (CAD) systems equipped with artificial intelligence (AI) in reducing the workload of dental technicians. We aimed to compare the accuracy and design... -
- CITED
-
- Close
- SHARE
-
- Close
- Deformation analysis of 3D-printed three-unit fixed partial dentures according to various cleaning strategies after DLP 3D printing: a geometric library matching approach
-
Jeong Y, Chung SY, Ye JR, Nam OH, Lee H
- KMID: 2565609
- J Adv Prosthodont.
- 2025 Feb;17(1):11-21.
- doi: 10.4047/jap.2025.17.1.11
PURPOSE Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
