- Color stability of 3D-printed denture resins: effect of aging, mechanical brushing and immersion in staining medium
-
Alfouzan AF, Alotiabi HM, Labban N, Al-Otaibi HN, Al Taweel SM, AlShehri HA
- KMID: 2534696
- J Adv Prosthodont.
- 2022 Oct;14(5):334-334.
- doi: 10.4047/jap.2022.14.5.334
-
- CITED
-
- Close
- SHARE
-
- Close
- Grain size, crystalline phase and fracture toughness of the monolithic zirconia
-
Bocam K, Anunmana C, Eiampongpaiboon T
- KMID: 2534691
- J Adv Prosthodont.
- 2022 Oct;14(5):285-293.
- doi: 10.4047/jap.2022.14.5.285
PURPOSE. This study evaluated the relationship among translucency, crystalline phase, grain size, and fracture toughness of zirconia. MATERIALS AND METHODS. Four commercial zirconia - Prettau®Anterior® (PA), Prettau® (P), InCorisZI (ZI),... -
- CITED
-
- Close
- SHARE
-
- Close
- Translucency and masking ability of translucent zirconia; comparison with conventional zirconia and lithium disilicate
-
Park JH, Bang HJ, Choi NH, Park EJ
- KMID: 2534695
- J Adv Prosthodont.
- 2022 Oct;14(5):324-333.
- doi: 10.4047/jap.2022.14.5.324
PURPOSE. The purpose of this study is to evaluate translucency and masking ability of translucent zirconia compared to conventional zirconia and lithium disilicate materials. MATERIALS AND METHODS. Three types of... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of repair methods and materials on the flexural strength of 3D-printed denture base resin
-
Carmo Viotto HEd, Dias Silva MD, Santos Nunes TSB, Coelho SRG, Pero AC
- KMID: 2534693
- J Adv Prosthodont.
- 2022 Oct;14(5):305-314.
- doi: 10.4047/jap.2022.14.5.305
PURPOSE. The aim of this study was to evaluate the flexural strength of a 3D-printed denture base resin (Cosmos Denture), after different immediate repair techniques with surface treatments and thermocycling.... -
- CITED
-
- Close
- SHARE
-
- Close
- Does the palatal vault form have an influence on the scan time and accuracy of intraoral scans of completely edentulous arches? An in-vitro study
-
Osman R, Alharbi N
- KMID: 2534692
- J Adv Prosthodont.
- 2022 Oct;14(5):294-304.
- doi: 10.4047/jap.2022.14.5.294
PURPOSE. The purpose of this study was to evaluate the influence of different palatal vault configurations on the accuracy and scan speed of intraoral scans (IO) of completely edentulous arches.... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of barium silicate filler content on mechanical properties of resin nanoceramics for additive manufacturing
-
Won S, Ko KH, Park CJ, Cho LR, Huh YH
- KMID: 2534694
- J Adv Prosthodont.
- 2022 Oct;14(5):315-323.
- doi: 10.4047/jap.2022.14.5.315
PURPOSE. The purpose of this study was to investigate the effect of barium silicate filler contents on mechanical properties of resin nanoceramics (RNCs) for additive manufacturing (AM). MATERIALS AND METHODS.... -
- CITED
-
- Close
- SHARE
-
- Close
- Microbiological cleaning and disinfection efficacy of a three-stage ultrasonic processing protocol for CAD-CAM implant abutments
-
Gehrke P, Riebe O, Fischer C, Weinhold O, Dhom G, Sader R, Weigl P
- KMID: 2534690
- J Adv Prosthodont.
- 2022 Oct;14(5):273-284.
- doi: 10.4047/jap.2022.14.5.273
PURPOSE. Computer-aided design and manufacturing (CAD-CAM) of implant abutments has been shown to result in surface contamination from site-specific milling and fabrication processes. If not removed, these contaminants can have... -
- CITED
-
- Close
- SHARE
-
- Close
