- Color stability of fully- and pre-crystalized chair-side CAD-CAM lithium disilicate restorations after required and additional sintering processes
-
Jurado CA, El-Gendy T, Hyer J, Tsujimoto A
- KMID: 2526759
- J Adv Prosthodont.
- 2022 Feb;14(1):56-62.
- doi: 10.4047/jap.2022.14.1.56
PURPOSE The aim of this study was to investigate shade changes in fully- and pre-crystalized CAD-CAM lithium disilicate crowns after the required and additional firing processes. MATERIALS AND METHODS One hundred and five... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of median mandibular flexure values in dentulous and edentulous subjects by using an intraoral digital scanner
-
Gülsoy M, Tuna SH, Pekkan G
- KMID: 2526757
- J Adv Prosthodont.
- 2022 Feb;14(1):32-44.
- doi: 10.4047/jap.2022.14.1.32
PURPOSE Mandibular flexure is a crucial phenomenon that may affect the success of rigid bilateral mandibular prosthetic treatment. The aim of this study was to determine the amount of median mandibular... -
- CITED
-
- Close
- SHARE
-
- Close
- Biometry of width between labial transitional line angles in anterior teeth: an observational study
-
Wen C, Ye H, Chen H, Zhou Y, Huang M, Sun Y
- KMID: 2526755
- J Adv Prosthodont.
- 2022 Feb;14(1):1-11.
- doi: 10.4047/jap.2022.14.1.1
PURPOSE The maximum width between the mesial and distal labial transitional line angles, described as “esthetic width” herein, could significantly influence the visual perception of the teeth and smile. This study... -
- CITED
-
- Close
- SHARE
-
- Close
- Color stability of fully- and pre-crystalized chair-side CAD-CAM lithium disilicate restorations after required and additional sintering processes
-
- KMID: 2526760
- J Adv Prosthodont.
- 2022 Feb;14(1):56-62.
- doi: 10.4047/jap.2022.14.1.56
PURPOSE The aim of this study was to investigate shade changes in fully- and pre-crystalized CAD-CAM lithium disilicate crowns after the required and additional firing processes. MATERIALS AND METHODS One hundred and five... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of retentive force and wear pattern of Locator® and ADD-TOC attachments combined with CAD-CAM milled bar
-
Chae SK, Cho WT, Choi JW, Bae EB, Bae JH, Bae GH, Huh JB
- KMID: 2526754
- J Adv Prosthodont.
- 2022 Feb;14(1):12-21.
- doi: 10.4047/jap.2022.14.1.12
PURPOSE The purpose of this study was to investigate changes in retention and wear pattern of Locator® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of the digital manufacturing technique of cantilevered implant-supported frameworks on abutment screw preload
-
Altuwaijri SM, Alotaibi HN, Alnassar TM
- KMID: 2526756
- J Adv Prosthodont.
- 2022 Feb;14(1):22-31.
- doi: 10.4047/jap.2022.14.1.22
PURPOSE The purpose of this study was to investigate the misfit and screw preload at the implant abutment connection of implant supported fixed dental prosthesis with cantilever (ICFDP) manufactured using different... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of post-rinsing time and method on accuracy of denture base manufactured with stereolithography
-
Katheng A, Kanazawa M, Komagamine Y, Iwaki M, Namano S, Minakuchi S
- KMID: 2526758
- J Adv Prosthodont.
- 2022 Feb;14(1):45-55.
- doi: 10.4047/jap.2022.14.1.45
PURPOSE This in vitro study investigates the effect of different post-rinsing times and methods on the trueness and precision of denture base resin manufactured through stereolithography. MATERIALS AND METHODS Ninety clear photopolymer resin... -
- CITED
-
- Close
- SHARE
-
- Close
