- Biomechanical investigation of maxillary implant-supported full-arch prostheses produced with different framework materials: a finite elements study
-
Ersöz MBT, Mumcu E
- KMID: 2537081
- J Adv Prosthodont.
- 2022 Dec;14(6):346-359.
- doi: 10.4047/jap.2022.14.6.346
PURPOSE. Four and six implant-supported fixed full-arch prostheses with various framework materials were assessed under different loading conditions. MATERIALS AND METHODS. In the edentulous maxilla, the implants were positioned in a... -
- CITED
-
- Close
- SHARE
-
- Close
- Accuracy of 14 intraoral scanners for the All-on-4 treatment concept: a comparative in vitro study
-
Kaya G, Bilmenoglu C
- KMID: 2537085
- J Adv Prosthodont.
- 2022 Dec;14(6):388-398.
- doi: 10.4047/jap.2022.14.6.388
PURPOSE. This in vitro study aimed to evaluate the accuracy of 14 different intraoral scanners for the All-on-4 treatment concept. MATERIALS AND METHODS. Four implants were placed in regions 13,... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the accuracy of dental casts manufactured with 3D printing technique in the All-on-4 treatment concept
-
Tas H, Demirci F, Tuzlali M, Bahce E, Avcu GY
- KMID: 2537084
- J Adv Prosthodont.
- 2022 Dec;14(6):379-387.
- doi: 10.4047/jap.2022.14.6.379
PURPOSE. The aim of this study is to compare the casts obtained by using conventional techniques and liquid crystal display (LCD) three-dimensional (3D) print techniques in the All-on-4 treatment concept... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional analysis of the outcome of different scanning strategies in virtual interocclusal registration
-
Mei J, Ma L, Chao J, Liu F, Shen J
- KMID: 2537083
- J Adv Prosthodont.
- 2022 Dec;14(6):369-378.
- doi: 10.4047/jap.2022.14.6.369
PURPOSE. The purpose of this in vitro study was to assess whether scanning strategies of virtual interocclusal record (VIR) affect the accuracy of VIR during intraoral scanning. MATERIALS AND METHODS.... -
- CITED
-
- Close
- SHARE
-
- Close
- Analysis of surface characteristics of (Y, Nb)-TZP after finishing and polishing
-
Yoo Sk, Jo YH, Yeo ISL, Yoon HI, Lee JH, Ahn JS, Han JS
- KMID: 2537080
- J Adv Prosthodont.
- 2022 Dec;14(6):335-345.
- doi: 10.4047/jap.2022.14.6.335
PURPOSE. This in vitro study aimed to evaluate the surface characteristics of a full veneer crown fabricated chairside (CS) from a (Y, Nb)-TZP zirconia block in response to conventional zirconia... -
- CITED
-
- Close
- SHARE
-
- Close
- Assessment of effect of accelerated aging on interim fixed dental materials using digital technologies
-
Alageel O, Alsadon O, Almansour H, Alshehri A, Alhabbad F, Alsarani M
- KMID: 2537082
- J Adv Prosthodont.
- 2022 Dec;14(6):360-368.
- doi: 10.4047/jap.2022.14.6.360
PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative... -
- CITED
-
- Close
- SHARE
-
- Close
