Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

10 results
Display

Bonding of conventional provisional resin to 3D printed resin: the role of surface treatments and type of repair resins

Lim NK, Shin SY

PURPOSE This study evaluated the shear bond strength between 3D printed provisional resin and conventional provisional resin depending on type of conventional provisional resin and different surface treatments of 3D printed...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Biomechanical stress and microgap analysis of bone-level and tissue-level implant abutment structure according to the five different directions of occlusal loads

Kim JH, Noh Gw, Hong SJ, Lee Hj

PURPOSE The stress distribution and microgap formation on an implant abutment structure was evaluated to determine the relationship between the direction of the load and the stress value. MATERIALS AND METHODS Two...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Displacement of scan body during screw tightening: A comparative in vitro study

Kim J, Son K, Lee KB

PURPOSE The purpose of this study was to evaluate the occurrence of displacement while tightening the screw of scan bodies, which were compared according to the material type. MATERIALS AND METHODS Three...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparing the accuracy of six intraoral scanners on prepared teeth and effect of scanning sequence

Diker B, Tak

PURPOSE The aim of this study was to evaluate the accuracy of six recently introduced intraoral scanners (IOSs) for single crown preparations isolated from the complete arch, and to determine the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of repeated surface treatment of zirconia on its bond strength to resin cement

Maciel LC, Amaral M, Queiroz DA, Baroudi K, Silva-Concílio LR

PURPOSE The aim of this study is to evaluate the influence of repeated surface treatments on wettability and surface roughness for zirconia surface and bond strength of zirconia-based ceramics to resin...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Fracture resistance and marginal fit of the zirconia crowns with varied occlusal thickness

Tekin YH, Hayran Y

PURPOSE The present study aimed to evaluate the clinical applicability of monolithic zirconia (MZ) crowns of different thickness via determination of fracture resistance and marginal fit. MATERIALS AND METHODS MZ crowns with...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Shear bond strengths of aged and non-aged CAD/CAM materials after different surface treatments

Kilinc H, Sanal FA, Turgut S

PURPOSE To assess shear bond strengths (SBS) of resin composites on aged and non-aged prosthetic materials with various surface treatments. MATERIALS AND METHODS Cerasmart (CE), Vita Enamic (VE), Vita Mark II (VM),...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
An experimental study on hydrothermal degradation of cubic-containing translucent zirconia

Kengtanyakich S, Peampring C

PURPOSE The aims of this study were to investigate mechanical properties and hydrothermal degradation behaviour of the cubic-containing translucent yttrium oxide stabilized tetragonal zirconia polycrystal (Y-TZP). MATERIALS AND METHODS Four groups of Y-TZP...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Color stability of provisional restorative materials with different fabrication methods

Song SY, Shin YH, Lee JY, Shin SW

PURPOSE The aim of this study was to investigate and compare the color stability of provisional restorative materials fabricated by 3D printing, dental milling, and conventional materials. MATERIALS AND METHODS For the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement

Han SY, Moon YH, Lee Jh

PURPOSE The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and CAD/CAM purposed materials were evaluated to find influence of each material. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2021 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr