- The influence of thread geometry on implant osseointegration under immediate loading: a literature review
-
Ryu HS, Namgung C, Lee JH, Lim YJ
- KMID: 2284730
- J Adv Prosthodont.
- 2014 Dec;6(6):547-554.
- doi: 10.4047/jap.2014.6.6.547
Implant success is achieved by the synergistic combination of numerous biomechanical factors. This report examines the mechanical aspect of implants. In particular, it is focused on macrodesign such as thread... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of coloring procedures on zirconia/veneer ceramics bond strength
-
Tuncel I, Ozat P, Eroglu E
- KMID: 2284717
- J Adv Prosthodont.
- 2014 Dec;6(6):451-455.
- doi: 10.4047/jap.2014.6.6.451
PURPOSE: The most common failure seen in restorations with a zirconia core is total or layered delamination of the ceramic veneer. In the present study, the shear bond strengths between... -
- CITED
-
- Close
- SHARE
-
- Close
- Mechanical properties of zirconia after different surface treatments and repeated firings
-
Subasi MG, Demir N, Kara O, Ozturk AN, Ozel F
- KMID: 2284719
- J Adv Prosthodont.
- 2014 Dec;6(6):462-467.
- doi: 10.4047/jap.2014.6.6.462
PURPOSE: This study investigated the influence of surface conditioning procedures and repeated firings on monoclinic content and strength of zirconia before cementation. MATERIALS AND METHODS: Sintered bar-shaped zirconia specimens were subjected... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of gag reflex on removable prosthetic restoration tolerance according to the patient section of the short form of the Gagging Problem Assessment Questionnaire
-
Yildirim-Bicer AZ, Akarslan Z
- KMID: 2284721
- J Adv Prosthodont.
- 2014 Dec;6(6):474-482.
- doi: 10.4047/jap.2014.6.6.474
PURPOSE: To assess removable prosthetic restoration tolerance according to the patient section of the short form of the Gagging Problem Assessment Questionnaire (GPA-pa SF) and the influence of gender, education... -
- CITED
-
- Close
- SHARE
-
- Close
- Techniques for dental implant nanosurface modifications
-
Pachauri P, Bathala LR, Sangur R
- KMID: 2284724
- J Adv Prosthodont.
- 2014 Dec;6(6):498-504.
- doi: 10.4047/jap.2014.6.6.498
PURPOSE: Dental implant has gained clinical success over last decade with the major drawback related to osseointegration as properties of metal (Titanium) are different from human bone. Currently implant procedures... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of repeated firings on the color change of dental ceramics using different glazing methods
-
Yilmaz K, Gonuldas F, Ozturk C
- KMID: 2284714
- J Adv Prosthodont.
- 2014 Dec;6(6):427-433.
- doi: 10.4047/jap.2014.6.6.427
PURPOSE: Surface color is one of the main criteria to obtain an ideal esthetic. Many factors such as the type of the material, surface specifications, number of firings, firing temperature... -
- CITED
-
- Close
- SHARE
-
- Close
- Faculty-supervised measurements of the face and of mandibular movements on young adults
-
Woelfel JB, Igarashi T, Dong JK
- KMID: 2284722
- J Adv Prosthodont.
- 2014 Dec;6(6):483-490.
- doi: 10.4047/jap.2014.6.6.483
PURPOSE: The purpose of this study was to determine the average facial proportions and mandibular movement capacity of 316 first-year dental students who carefully recorded them on each other. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- The influence of systemically administered oxytocin on the implant-bone interface area: an experimental study in the rabbit
-
Cho SA, Park SH, Cho JH
- KMID: 2284725
- J Adv Prosthodont.
- 2014 Dec;6(6):505-511.
- doi: 10.4047/jap.2014.6.6.505
PURPOSE: The purpose of this study was to assess the effect of systemically administered oxytocin (OT) on the implant-bone interface by using histomorphometric analysis and the removal torque test. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Alveolar ridge preservation of an extraction socket using autogenous tooth bone graft material for implant site development: prospective case series
-
Kim YK, Yun PY, Um IW, Lee HJ, Yi YJ, Bae JH, Lee J
- KMID: 2284727
- J Adv Prosthodont.
- 2014 Dec;6(6):521-527.
- doi: 10.4047/jap.2014.6.6.521
This case series evaluated the clinical efficacy of autogenous tooth bone graft material (AutoBT) in alveolar ridge preservation of an extraction socket. Thirteen patients who received extraction socket graft using... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems
-
Jo JY, Yang DS, Huh JB, Heo JC, Yun MJ, Jeong CM
- KMID: 2284723
- J Adv Prosthodont.
- 2014 Dec;6(6):491-497.
- doi: 10.4047/jap.2014.6.6.491
PURPOSE: This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS: Internal conical connection type implants,... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparable efficacy of silk fibroin with the collagen membranes for guided bone regeneration in rat calvarial defects
-
Kim JY, Yang BE, Ahn JH, Park SO, Shim HW
- KMID: 2284729
- J Adv Prosthodont.
- 2014 Dec;6(6):539-546.
- doi: 10.4047/jap.2014.6.6.539
PURPOSE: Silk fibroin (SF) is a new degradable barrier membrane for guided bone regeneration (GBR) that can reduce the risk of pathogen transmission and the high costs associated with the... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of a new self-adhering flowable composite resin for lithium disilicate-reinforced CAD/CAM ceramic material
-
Erdemir U, Sancakli H, Sancakli E, Eren MM, Ozel S, Yucel T, Yildiz E
- KMID: 2284715
- J Adv Prosthodont.
- 2014 Dec;6(6):434-443.
- doi: 10.4047/jap.2014.6.6.434
PURPOSE: The purpose of this study was to evaluate and compare the effects of different surface pretreatment techniques on the surface roughness and shear bond strength of a new self-adhering... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials
-
Harianawala HH, Kheur MG, Apte SK, Kale BB, Sethi TS, Kheur SM
- KMID: 2284718
- J Adv Prosthodont.
- 2014 Dec;6(6):456-461.
- doi: 10.4047/jap.2014.6.6.456
PURPOSE: Translucency and colour stability are two most important aspects for an aesthetic dental restoration. Glass ceramic restorations are popular amongst clinicians because of their superior aesthetic properties. In the... -
- CITED
-
- Close
- SHARE
-
- Close
- Focal epithelial hyperplasia arising after delivery of metal-ceramic fixed dental prosthesis
-
Park MW, Cho YA, Kim SM, Myoung H, Lee JH, Lee SK
- KMID: 2284731
- J Adv Prosthodont.
- 2014 Dec;6(6):555-558.
- doi: 10.4047/jap.2014.6.6.555
Focal epithelial hyperplasia (FEH) is a human papillomavirus (HPV)-induced alteration of the oral mucosa that presents with a clinically distinct appearance. While other HPV-infected lesions such as squamous papilloma, verruca... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of anatomic, semi-anatomic and non-anatomic occlusal surface tooth preparations on the adaptation of zirconia copings
-
Habib SR, Asiri W, Hefne MJ
- KMID: 2284716
- J Adv Prosthodont.
- 2014 Dec;6(6):444-450.
- doi: 10.4047/jap.2014.6.6.444
PURPOSE: To compare the accuracy of marginal and internal adaptation of zirconia (Zr) copings fabricated on anatomic (A), semi-anatomic (SA) and non-anatomic (NA) occlusal surface preparations. MATERIALS AND METHODS: 45 extracted... -
- CITED
-
- Close
- SHARE
-
- Close
- Accuracy of 3D white light scanning of abutment teeth impressions: evaluation of trueness and precision
-
Jeon JH, Kim HY, Kim JH, Kim WC
- KMID: 2284720
- J Adv Prosthodont.
- 2014 Dec;6(6):468-473.
- doi: 10.4047/jap.2014.6.6.468
PURPOSE: This study aimed to evaluate the accuracy of digitizing dental impressions of abutment teeth using a white light scanner and to compare the findings among teeth types. MATERIALS AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- A prospective study on the effectiveness of newly developed autogenous tooth bone graft material for sinus bone graft procedure
-
Jun SH, Ahn JS, Lee JI, Ahn KJ, Yun PY, Kim YK
- KMID: 2284728
- J Adv Prosthodont.
- 2014 Dec;6(6):528-538.
- doi: 10.4047/jap.2014.6.6.528
PURPOSE: The purpose of this prospective study was to evaluate the effectiveness of newly developed autogenous tooth bone graft material (AutoBT)application for sinus bone graft procedure. MATERIALS AND METHODS: The patients... -
- CITED
-
- Close
- SHARE
-
- Close
- Osteoblastic behavior to zirconium coating on Ti-6Al-4V alloy
-
Lee BA, Kim HJ, Xuan YZ, Park YJ, Chung HJ, Kim YJ
- KMID: 2284726
- J Adv Prosthodont.
- 2014 Dec;6(6):512-520.
- doi: 10.4047/jap.2014.6.6.512
PURPOSE: The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
