- Wear of 3D printed and CAD/CAM milled interim resin materials after chewing simulation
-
Myagmar G, Lee JH, Ahn JS, Luke Yeo IS, Yoon HI, Han JS
- KMID: 2516994
- J Adv Prosthodont.
- 2021 Jun;13(3):144-151.
- doi: 10.4047/jap.2021.13.3.144
PURPOSE The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative study for osseointegration according to surface treatments of dental implants
-
Jun MH, Kim MJ, Sim YS, Kook MS
- KMID: 2504279
- Oral Biol Res.
- 2020 Jun;44(2):77-82.
- doi: 10.21851/obr.44.02.202006.77
The purpose of this study was to evaluate the effect of hydroxyapatite (HA) full-coating and resorbable blast media (RBM) on the osseointegration of implants placed in the bone. Twelve rabbits... -
- CITED
-
- Close
- SHARE
-
- Close
- Bioactive characteristics of an implant surface coated with a pH buffering agent: an in vitro study
-
Pae HC, Kim SK, Park JY, Song YW, Cha JK, Paik JW, Choi SH
- KMID: 2465381
- J Periodontal Implant Sci.
- 2019 Dec;49(6):366-381.
- doi: 10.5051/jpis.2019.49.6.366
PURPOSE: The purpose of this study was to evaluate the effectiveness of conventional sandblasted, large-grit, acid-etched (SLA) surface coated with a pH buffering solution based on surface wettability, blood protein... -
- CITED
-
- Close
- SHARE
-
- Close
- Surface alterations following instrumentation with a nylon or metal brush evaluated with confocal microscopy
-
Kim YS, Park JB, Ko Y
- KMID: 2461021
- J Periodontal Implant Sci.
- 2019 Oct;49(5):310-318.
- doi: 10.5051/jpis.2019.49.5.310
PURPOSE: Surface alterations of titanium discs following instrumentation with either a nylon brush or a metal brush were evaluated. METHODS: A total of 27 titanium discs with 3 surface types (9... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of Fluoride Recharging on Fluoride Release and Surface Properties of Orthodontic Bracket Adhesives
-
Byeon SM
- KMID: 2434974
- J Dent Hyg Sci.
- 2018 Aug;18(4):218-226.
- doi: 10.17135/jdhs.2018.18.4.218
The aim of this study was to compare fluoride release and surface changes according to different orthodontic bracket adhesives the application of fluoride products. We used non-fluoridated composite resin Transbond... -
- CITED
-
- Close
- SHARE
-
- Close
- Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing
-
Şen N, Tuncelli B, Göller G
- KMID: 2418632
- J Adv Prosthodont.
- 2018 Aug;10(4):271-278.
- doi: 10.4047/jap.2018.10.4.271
PURPOSE: The purpose of this in vitro study was to evaluate the effect of abrasive toothbrushing on the surface properties of monolithic computer-assisted design and computer-assisted manufacturing (CAD/CAM) materials stored... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of Implant Surface Coated with pH Buffering Agent on Early Osseointegration
-
Kang JH, Kim SK, Pae HC, Park JY, Cha JK, Choi SH
- KMID: 2437216
- J Korean Dent Sci.
- 2018 Jun;11(1):5-13.
- doi: 10.5856/JKDS.2018.11.1.5
PURPOSE: Surface treatment with pH buffering agent has been developed to achieve higher and faster osseointegration. The aim of this study was to evaluate its influence by measuring removal torque... -
- CITED
-
- Close
- SHARE
-
- Close
- Tissue integration of zirconia and titanium implants with and without buccal dehiscence defects
-
Lim HC, Jung RE, Hämmerle , Kim MJ, Paeng KW, Jung UW, Thoma DS
- KMID: 2414931
- J Periodontal Implant Sci.
- 2018 Jun;48(3):182-192.
- doi: 10.5051/jpis.2018.48.3.182
PURPOSE: The purpose of the present study was to validate an experimental model for assessing tissue integration of titanium and zirconia implants with and without buccal dehiscence defects. METHODS: In 3... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro study of Streptococcus mutans adhesion on composite resin coated with three surface sealants
-
Kim DH, Kwon TY
- KMID: 2367320
- Restor Dent Endod.
- 2017 Feb;42(1):39-47.
- doi: 10.5395/rde.2017.42.1.39
OBJECTIVES: Although the coating of surface sealants to dental composite resin may potentially reduce bacterial adhesion, there seems to be little information regarding this issue. This preliminary in vitro study... -
- CITED
-
- Close
- SHARE
-
- Close
- Randomized controlled clinical trial of 2 types of hydroxyapatite-coated implants on moderate periodontitis patients
-
Kim HS, Yun PY, Kim YK
- KMID: 2354932
- J Periodontal Implant Sci.
- 2016 Oct;46(5):337-349.
- doi: 10.5051/jpis.2016.46.5.337
PURPOSE: The aim of this study was to compare and analyze the peri-implant tissue conditions and prospective clinical outcomes associated with 2 types of hydroxyapatite (HA)-coated implants: (1) fully HA-coated... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of indirect composite material to monolithic zirconia
-
Sari F, Secilmis A, Simsek I, Ozsevik S
- KMID: 2349334
- J Adv Prosthodont.
- 2016 Aug;8(4):267-274.
- doi: 10.4047/jap.2016.8.4.267
PURPOSE: This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). MATERIALS AND METHODS: Partially... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effects of a Er:YAG Laser on Machined, Sand-Blasted and Acid-Etched, and Resorbable Blast Media Titanium Surfaces Using Confocal Microscopy and Scanning Electron Microscopy
-
Park JB, Kim DY, Ko Y
- KMID: 2382974
- J Korean Dent Sci.
- 2016 Jun;9(1):19-27.
- doi: 10.5856/JKDS.2016.9.1.19
PURPOSE: Laser treatment has become a popular method in implant dentistry, and lasers have been used for the decontamination of implant surfaces when treating peri-implantitis. This study was performed to... -
- CITED
-
- Close
- SHARE
-
- Close
- Osteoblastic behavior to zirconium coating on Ti-6Al-4V alloy
-
Lee BA, Kim HJ, Xuan YZ, Park YJ, Chung HJ, Kim YJ
- KMID: 2284726
- J Adv Prosthodont.
- 2014 Dec;6(6):512-520.
- doi: 10.4047/jap.2014.6.6.512
PURPOSE: The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- Early bone healing onto implant surface treated by fibronectin/oxysterol for cell adhesion/osteogenic differentiation: in vivo experimental study in dogs
-
Lee JS, Yang JH, Hong JY, Jung UW, Yang HC, Lee IS, Choi SH
- KMID: 2027822
- J Periodontal Implant Sci.
- 2014 Oct;44(5):242-250.
- doi: 10.5051/jpis.2014.44.5.242
PURPOSE: This study aimed to evaluate the effects of fibronectin and oxysterol immobilized on machined-surface dental implants for the enhancement of cell attachment and osteogenic differentiation, on peri-implant bone healing... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of pretreating resorbable blast media titanium discs with an ultrasonic scaler or toothbrush on the bacterial removal efficiency of brushing
-
Koh M, Park JB, Jang YJ, Ko Y
- KMID: 2329650
- J Periodontal Implant Sci.
- 2013 Dec;43(6):301-307.
PURPOSE: This in vitro study was performed to assess the adherence of Porphyromonas gingivalis to a resorbable blast media (RBM) titanium surface pretreated with an ultrasonic scaler or toothbrush and... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of magnesium and calcium phosphate coatings on osteoblastic responses to the titanium surface
-
Park KD, Lee BA, Piao XH, Lee KK, Park SW, Oh HK, Kim YJ, Park HJ
- KMID: 2176530
- J Adv Prosthodont.
- 2013 Nov;5(4):402-408.
- doi: 10.4047/jap.2013.5.4.402
PURPOSE: The aim of this study was to evaluate the surface properties and in vitro bioactivity to osteoblasts of magnesium and magnesium-hydroxyapatite coated titanium. MATERIALS AND METHODS: Themagnesium (Mg) and magnesium-hydroxyapatite... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of polishing and glazing on the color and spectral distribution of monolithic zirconia
-
Kim HK, Kim SH, Lee JB, Han JS, Yeo IS
- KMID: 2118169
- J Adv Prosthodont.
- 2013 Aug;5(3):296-304.
- doi: 10.4047/jap.2013.5.3.296
PURPOSE: The aim of this study was to evaluate the effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. MATERIALS AND METHODS: Forty-five monolithic zirconia specimens... -
- CITED
-
- Close
- SHARE
-
- Close
- Surface characteristics and osteoblastic cell response of alkali-and heat-treated titanium-8tantalum-3niobium alloy
-
Lee BA, Kang CH, Vang MS, Jung YS, Piao XH, Kim OS, Chung HJ, Kim YJ
- KMID: 2438863
- J Periodontal Implant Sci.
- 2012 Dec;42(6):248-255.
PURPOSE: The aim of the present study was to evaluate the biological response of alkali- and heat-treated titanium-8tantalum-3niobium surfaces by cell proliferation and alkaline phosphatase (ALP) activity analysis. METHODS: Commercial pure... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics
-
Mosharraf , Rismanchian M, Savabi O, Ashtiani A
- KMID: 2054757
- J Adv Prosthodont.
- 2011 Dec;3(4):221-228.
- doi: 10.4047/jap.2011.3.4.221
PURPOSE: Veneering porcelain might be delaminated from underlying zirconia-based ceramics. The aim of this study was the evaluation of the effect of different surface treatments and type of zirconia (white... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effect of Heat Treatment and Mechanical Polishing on Nitinol Stent
-
Park S, Kang SG, Lee SC, Kim KS, Choi SH, Park CS, Yoon CJ, Park JH
- KMID: 2012866
- J Korean Soc Radiol.
- 2009 Sep;61(3):143-148.
- doi: 10.3348/jksr.2009.61.3.143
PURPOSE: To understand the effect of heat treatment and mechanical polishing of a Nitinol wire on the chemical composition and physical morphology of the wire surface. MATERIALS AND METHODS: Stents with... -
- CITED
-
- Close
- SHARE
-
- Close
