Skip Navigation
Skip to contents
Results by Year

View Wide

Filter

ARTICLE TYPE

PUBLICATION DATE

14 results
Display

Evaluation of two interforaminal implants and implant-assisted removable dentures on stress distribution: an in vitro study

Arat Bilhan S, Geckili O, Cilingir A, Bozdag E, Bilhan H

OBJECTIVES: In mandibular edentulism, the treatment option with a two-interforaminal implant-retained bridge and a removable partial denture is rarely evaluated in literature. The aim of this in vitro study was...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Changes in occlusal force depending on the movement of the adjacent and opposing teeth after loss of lower first molar: comparative study by using a strain gauge

Song MJ, Park JM, Chun YS

PURPOSE: The aim of this study was to investigate the changes in occlusal force after loss of the lower first molar depending on the inclination and extrusion of the adjacent...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative study on stress distribution around internal tapered connection implants according to fit of cement- and screw-retained prostheses

Lee MY, Heo SJ, Park EJ, Park JM

PURPOSE: The aim of this study was to compare the passivity of implant superstructures by assessing the strain development around the internal tapered connection implants with strain gauges. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The impact of frenulum height on strains in maxillary denture bases

Cilingir A, Bilhan H, Baysal G, Sunbuloglu E, Bozdag E

PURPOSE: The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of polymerization shrinkage stress in silorane-based composites

Ryu SJ, Cheon JH, Min JB

OBJECTIVES: The purpose of this study was to evaluate the polymerization shrinkage stress among conventional methacrylate-based composite resins and a silorane-based composite resin. MATERIALS AND METHODS: The strain gauge method was...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A strain gauge analysis of implant-supported cantilevered fixed prosthesis under distal static load

Sohn BS, Heo SJ, Chang IT, Koak JY, Kim SK

  • KMID: 2195626
  • J Korean Acad Prosthodont.
  • 2007 Dec;45(6):717-723.
STATEMENT OF PROBLEM: Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative accuracy of the splinted and unsplinted impression methods for internal connection

Choi JH, Kim CW, Jang KS, Lim YJ

  • KMID: 2000731
  • J Korean Acad Prosthodont.
  • 2005 Jun;43(3):352-362.
STATEMENT OF PROBLEM: Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression techniques in internal connection implant systems....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Strain on the labial plates around abutments supporting removable partial dentures with various prosthetic designs: an in vitro study

Kim SK

  • KMID: 2000728
  • J Korean Acad Prosthodont.
  • 2005 Jun;43(3):322-330.
STATEMENT OF PROBLEM: In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress. PURPOSE: The purpose...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of abutment splinting on stress distribution in unilateral distal extension RPD

Ahn HY, Jin TH

  • KMID: 2195771
  • J Korean Acad Prosthodont.
  • 2004 Apr;42(2):154-166.
STATEMENT OF PROBLEM: In distal extension removable partial denture, the preservation of health of abutment teeth are very important, but they are always subjected to unfavorable stress. PURPOSE: The purpose...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Relationship between maximum bite force and facial skeletal pattern

Choi WC, Kim TW

  • KMID: 1976474
  • Korean J Orthod.
  • 2003 Dec;33(6):437-451.
The purpose of this study was to measure maximum bite force and to investigate its relationship with anteroposterior, vertical, and transverse facial skeletal measurements. From among the dental students at...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The Distribution of the Periacetabular Strain After THA in Relation to Preservation or Removal of the Subchondral Bone and the Change in Hip Joint Position and the Amount of the Load: Biomechanical Analysis using Cadaver Pelves and Finite Element Model

Ha CW, Han KY, Kim YM

  • KMID: 2399054
  • J Korean Orthop Assoc.
  • 2003 Oct;38(6):560-567.
PURPOSE: The purpose of this study is to get more reliable biomechanical data on the changes in the periprosthetic strain after total hip arthroplasty on cadaveric pelvic ring, especially around...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Strain changes of acrylic resin specimens cured by three curing cycles

Kang IH, Kim YS, Kim CW

  • KMID: 2195848
  • J Korean Acad Prosthodont.
  • 2002 Jun;40(3):236-245.
The acrylic resin was first introduced as denture base materials in 1937 and it is commonly used for denture base fabrication nowadays. Three different curing cycles (Conventional curing cycle, short...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
An analytical study on strain distribution using strain gauge attached on root surface

Kim SC, Park KC

  • KMID: 2074773
  • Korean J Orthod.
  • 2001 Jun;31(3):325-333.
Optimal orthodontic treatment could be possible when a orthodontist can predict and control tooth movement by applying a planned force system to the dentition. The moment to force(M/F) ratio at the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
THE EFFECTS OF FABRICATION AND TIGHTENING METHODS OF GOLD CYLINDER ON THE PRELOAD OF THE IMPLANT ABUTMENT

Cho HW, Kim SH

  • KMID: 2195965
  • J Korean Acad Prosthodont.
  • 2000 Oct;38(5):695-703.
The purpose of this study was to evaluate the effects of fabrication and tightening methods of gold cyliner on the preload of the standard abutment. Three linear strain gauges (KFR-02N-120C1-23,...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2021 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr