Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

14 results
Display

A Comparison between Portal Dosimetry and Mobius3D Results for Patient-Specific Quality Assurance in Radiotherapy

Kim SY, Park J, Park JW, Yea JW, Oh SA

Purpose: The purpose of this study was to compare the clinical quality assurance results of portal dosimetry using an electronic portal imaging device, a method that is extensively used for...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Measurements of Neutron Activation and Dose Rate Induced by High-Energy Medical Linear Accelerator

Kwon NH, Jang YJ, Kim J, Kim KB, Yoo J, Ahn SH, Kim DW, Choi SH

Purpose: During the treatments of cancer patients with a linear accelerator (LINAC) using photon beams with energies ≥8 MV, the components inside the LINAC head get activated through the interaction...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Dosimetric Comparison between Varian Halcyon Analytical Anisotropic Algorithm and Acuros XB Algorithm for Planning of RapidArc Radiotherapy of Cervical Carcinoma

Mbewe J, Shiba S

Purpose: The Halcyon radiotherapy platform at Groote Schuur Hospital was delivered with a factory-configured analytical anisotropic algorithm (AAA) beam model for dose calculation. In a recent system upgrade, the Acuros...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Dosimetric Study Using Patient-Specific ThreeDimensional-Printed Head Phantom with Polymer Gel in Radiation Therapy

Choi Y, Chun KJ, Kim ES, Jang YJ, Park JA, Kim KB, Kim GH, Choi SH

Purpose: In this study, we aimed to manufacture a patient-specific gel phantom combining threedimensional (3D) printing and polymer gel and evaluate the radiation dose and dose profile using gel dosimetry....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Status of Domestic and International Recommendations for Protection Design and Evaluation of Medical Linear Accelerator Facilities

Choi SH, Shin DO, Shin Ji, Kwon NH, Ahn SH, Kim DW

Various types of high-precision radiotherapy, such as intensity-modulated radiation therapy (IMRT), tomotherapy (Tomo), and stereotactic body radiation therapy have been available since 1997. After being covered by insurance in 2015,...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Development of a Beam Source Modeling Approach to Calculate Head Scatter Factors for a 6 MV Unflattened Photon Beam

Park SY, Choi N, Jang NY

Purpose: This study aimed to investigate the accuracy of head scatter factor (S c ) by applying a developed multi-leaf collimator (MLC) scatter source model for an unflattened photon beam. Methods:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Design of Multipurpose Phantom for External Audit on Radiotherapy

Lim S

Purpose: This study aimed to design a multipurpose dose verification phantom for external audits to secure safe and optimal radiation therapy. Methods: In this study, we used International Atomic Energy Agency...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluating the Effects of Dose Rate on Dynamic Intensity-Modulated Radiation Therapy Quality Assurance

Kim KH, Back TS, Chung EJ, Suh TS, Sung W

Purpose: To investigate the effects of dose rate on intensity-modulated radiation therapy (IMRT) quality assurance (QA). Methods: We performed gamma tests using portal dose image prediction and log files of a...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Characteristic Evaluation of Pressure Mapping System for Patient Position Monitoring in Radiation Therapy

Kang S, Choi CH, Park JM, Chung JB, Eom KY, Kim Ji

Purpose: This study evaluated the features of a pressure mapping system for patient motion monitoring in radiation therapy. Methods: The pressure mapping system includes an MS 9802 force sensing resistor (FSR)...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Assessing Commercial CLEANBOLUS Based on Silicone for Clinical Use

Son J, Jung S, Park JM, Choi CH, Kim Ji

Purpose: We investigated the properties of CLEANBOLUS based on silicone with suitable characteristics for clinical use. Methods: We evaluated the characteristics of CLEANBOLUS and compared the results with the commercial product...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Synthetic Computed Tomography Generation while Preserving Metallic Markers for Three-Dimensional Intracavitary Radiotherapy: Preliminary Study

Jin H, Kang S, Kang HC, Choi CH

Purpose: This study aimed to develop a deep learning architecture combining two task models to generate synthetic computed tomography (sCT) images from low-tesla magnetic resonance (MR) images to improve metallic...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Dosimetric Characteristics of Flexible Radiochromic Film Based on LiPCDA

Jung S, Cho JD, Kim Ji, Park JM, Choi CH

This study aimed to determine the optimal thickness of the active layer and scan mode for a flexible radiochromic film (F-RCF) based on the active lithium salt of pentacosa-10,12-diynoic acid...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Estimation of Noise Level and Edge Preservation for Computed Tomography Images: Comparisons in Iterative Reconstruction

Kim S, Ahn C, Jeong WK, Kim JH, Chun M

Purpose: This study automatically discriminates homogeneous and structure edge regions on computed tomography (CT) images, and it evaluates the noise level and edge preservation ratio (EPR) according to the different...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of Total Collimation Width on Relative Electron Density, Effective Atomic Number, and Stopping Power Ratio Acquired by Dual-Layer Dual-Energy Computed Tomography

Jung S, Kim B, Yoon E, Kim Ji, Park JM, Choi CH

Purpose: This study aimed to evaluate the effect of collimator width on effective atomic number (EAN), relative electron density (RED), and stopping power ratio (SPR) measured by dual-layer dual-energy computed...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr