- Effect of low temperature degradation on multi-layered zirconia block for dental CAD/CAM
-
Seo YB, Kim KN, Kwon JS
- KMID: 2524538
- Korean J Dent Mater.
- 2021 Dec;48(4):221-228.
- doi: 10.14815/kjdm.2021.48.4.221
Ceramic prosthesis fabrication using CAD/CAM has advantages such as high convenience, fast fabrication speed, and high esthetics, resulted in increasing use in clinical practice. Among them, the multi-layered zirconia block... -
- CITED
-
- Close
- SHARE
-
- Close
- Plasma electrolytic oxidized surface of (Mg/Si)-hydroxyapatite coated Ti-29Nb-xHf alloys for dental implant
-
Park SY, Choe HC
- KMID: 2524541
- Korean J Dent Mater.
- 2021 Dec;48(4):255-268.
- doi: 10.14815/kjdm.2021.48.4.255
In this study, in order to form a micropore oxide film containing (Mg/Si)-hydroxyapatite on the surface of a Ti-29Nb-xHf alloy, pores were formed on the surface of the alloy by... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of cooling rate during porcelain firing on the optical properties of 3 mol% yttria-stabilized zirconia
-
Shin HJ, Kwon YH, Seol HJ
- KMID: 2524542
- Korean J Dent Mater.
- 2021 Dec;48(4):269-280.
- doi: 10.14815/kjdm.2021.48.4.269
This study investigated the effect of the difference in the cooling rates on the optical properties of zirconia during the simulated firing of porcelain, without a porcelain layer on a... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of bone regeneration ability of Mg mesh coated with calcium phosphate by cyclic precalcification treatment
-
Park JE, Kim SY, Ji JH, Jang YS, Jeon WY, Lee MH, Bae TS
- KMID: 2524539
- Korean J Dent Mater.
- 2021 Dec;48(4):229-244.
- doi: 10.14815/kjdm.2021.48.4.229
Surface treatment was conducted to reduce dissolution of Mg mesh and to improve bioactivity in physiological environment. Mg mesh was immersed in 40 wt% hydrofluoric (HF) solution for 2 hours... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of cyclic pre-calcification treatment on bioactivity of Ti-6Al-4V alloy orthodontic miniscrew
-
Park JH, Hwang JY, Won EK, Kim YW, Yang KR, Jeon WY, Lee MH, Bae TS
- KMID: 2524540
- Korean J Dent Mater.
- 2021 Dec;48(4):245-254.
- doi: 10.14815/kjdm.2021.48.4.245
This study was performed to evaluate the effect of cyclic precalcification treatment on the improvement of bioactivity of Ti-6Al-4V mini-screws. The cutted plate-shaped specimens of 10 mm × 10 mm... -
- CITED
-
- Close
- SHARE
-
- Close
- Mechanical and physico-chemical properties of premixed-MTA in contact with three different types of solutions
-
Kang TY, Choi JW, Kim KM, Kwon JS
- KMID: 2524543
- Korean J Dent Mater.
- 2021 Dec;48(4):281-292.
- doi: 10.14815/kjdm.2021.48.4.281
The study aims to analyze the compressive strength, pH, and surface properties of mineral trioxide aggregates (MTA), which can be used as a pulp capping and root canal filling material.... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the elution of residual monomers in three different denture base resins
-
Kim JW, Kim SH, Jeong SW, Kim HJ
- KMID: 2524544
- Korean J Dent Mater.
- 2021 Dec;48(4):293-304.
- doi: 10.14815/kjdm.2021.48.4.293
This study evaluated release of the residual monomer and cytotoxicity after polymerization of three denture base resins (heat curing resin, self-curing resin, light curing resin by 3D printer). Three types... -
- CITED
-
- Close
- SHARE
-
- Close
