- Hydroxyapatite Coatings on Titanium Using Electrochemical Deposition Method at Body Fluid Temperature
-
Kim SC, Hwang MJ, Lee WY, Park YJ, Song HJ
- KMID: 2423007
- Korean J Dent Mater.
- 2018 Sep;45(3):221-232.
- doi: 10.14815/kjdm.2018.45.3.221
In this study, hydroxyapatite (HAp) was coated on titanium using electrochemical deposition (ECD) method at body fluid temperature. The titanium specimens for ECD were prepared by chemically etching treatment using... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface pre-treatments and adhesive types on the shear bond strength between PEKK and Zirconia
-
Jung AM, Kim SM
- KMID: 2423006
- Korean J Dent Mater.
- 2018 Sep;45(3):209-220.
- doi: 10.14815/kjdm.2018.45.3.209
In this study, the effects of surface pre-treatment and adhesive type on the shear bond strength between PEKK (polyetherketoneketone) and zirconia were analyzed by means of shear bond test and... -
- CITED
-
- Close
- SHARE
-
- Close
- Change of optical properties and microstructure of an Ag-Pd-In alloy according to Ag content
-
Seol HJ, Cho SY, Cho MH
- KMID: 2423005
- Korean J Dent Mater.
- 2018 Sep;45(3):199-208.
- doi: 10.14815/kjdm.2018.45.3.199
In this study, change of optical properties and microstructure of an Ag-Pd-In alloy according to Ag content was investigated. For this purpose, specimen alloys were prepared by adding 0–100 wt.%... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of powder-liquid ratios and powder colors on color stability of 4-META / MMA-TBB resin after immersion in coffee
-
Choi Y, Jang SJ, Park SJ
- KMID: 2423004
- Korean J Dent Mater.
- 2018 Sep;45(3):187-198.
- doi: 10.14815/kjdm.2018.45.3.187
The aim of this study was to evaluate the color stability of 4-methacryloxyethyl trimellitate anhydride (4-META) / methyl methacrylate (MMA) & tri-n-butylborane (TBB) resin with different powder-liquid (P/L) ratios and... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of 457 nm light on the polymerization of dental composite resins
-
Ro JH, Yi DH, Seol HJ, Kwon YH
- KMID: 2423003
- Korean J Dent Mater.
- 2018 Sep;45(3):179-186.
- doi: 10.14815/kjdm.2018.45.3.179
The aim of this study was to determine if a 457 nm blue laser could effectively polymerize dental composite resins. After light curing 6 dental composite resins using a laser... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of beverage type and ingestion time on tooth corrosion
-
Cheon JD, Cho EA, Park HB, Choi YJ, Kim HJ, Lee JS, Bae EJ
- KMID: 2423002
- Korean J Dent Mater.
- 2018 Sep;45(3):169-178.
- doi: 10.14815/kjdm.2018.45.3.169
This study was conducted to analyze the effects of beverages on tooth corrosion by selecting drinks that are enjoyed by modern people. Drinks were selected for carbonated beverages (Coca Cola),... -
- CITED
-
- Close
- SHARE
-
- Close
- Histomorphometric evaluation of bone healing capacity of epigallocatechin-3-gallate-loaded β-TCP bone substitute in rabbit calvarial defects
-
Park JW
- KMID: 2423001
- Korean J Dent Mater.
- 2018 Sep;45(3):155-168.
- doi: 10.14815/kjdm.2018.45.3.155
This study investigated the effect of epigallocatechin-3-gallate (EGCG)-loaded microporous β-tricalcium phosphate (β-TCP) bone substitute in the bone healing of rabbit calvarial defects. New bone formation induced by β-TCP incorporating two... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of the microwave sintering period on the 3 point flexural strength and shade of zirconia restoration
-
Kang JH, Yu KM, Lee JH, Song DY, Lee JS, Kim JH, Bae EJ
- KMID: 2423000
- Korean J Dent Mater.
- 2018 Sep;45(3):147-154.
- doi: 10.14815/kjdm.2018.45.3.147
In this study, we tried to confirm clinically applicable applicability by comparing the difference in 3 point flexural strength and shade of the prosthesis depending on microwave sintering time of... -
- CITED
-
- Close
- SHARE
-
- Close
