Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

9 results
Display

The evaluation of the shear bond strength between various Hybrid CAD/CAM restorative materials and repairing composite resins

Jeong CS, Bae JM, Kim JM, Park YB, Oh S

The purpose of this study was to evaluate the shear bond strengths between various hybrid computer-aided design (CAD)/computer-aided manufacturing (CAM) restorative materials and repairing resin. Two resin network-based hybrid (Lava...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of cooling rate during oxidation treatment on the hardness change by post firing heat treatment of a Pd-Cu-Ga-Zn alloy after simulated porcelain firing

Kim MJ, Shin HJ, Kwon YH, Kim HI, Seol HJ

Effect of cooling rate during oxidation treatment on the hardness change by post firing heat treatment of a Pd-Cu-Ga-Zn alloy after simulated porcelain firing was investigated and the following results...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The Effect of Different Curing Condition on the Flexural Strength and Translucency of Orthodontic Acrylic Resin

Jung SM, Park MG

The purpose of this study is to evaluate the effects of polymerization conditions on the flexural strength and transparency of orthodontic acrylic resin. Materials and methods: The specimens were prepared...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of Bioactive Glass on Microhardness of Bleached Enamel Surface

Park YH, Choi AN, Jung KH, Park JK, Kwon YH, Son SA

The purpose of this study was to examine effects of bioactive glass on Vickers hardness of bleached enamel surface. Enamel specimens were bleached with 15% carbamide peroxide (CP) for 14days....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of Surface Treatment on Shear Bond Strength between Artificial Resin Teeth and Denture Base Resin

Jeoung SH, Choi JW, Choi BC, Kim SC

The purpose of this study was to investigate the effect of retaining holes on the denture base, as well as primer application, on the shear bond strength of denture base...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of Three-Dimensional Accuracy between Digital Models Obtained from Impression Scan and Model Scan

Kim DB, Kim JM, Kim YL

The purpose of the study is to compare and analyze the accuracy of digital images obtained from impression and stone model with model scanner and to find out clinical effectiveness. A...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Significant considerations of mechanical strength of BLT implant (Roxolid): Correlation between material and product strength under static and fatigue loads

Im JS, Yeo S, Park KO, Lee JH, Kwon TY

The purpose of this study is to correlate the material properties of TiZr alloy material (Roxolid) and the mechanical strength of the implant fixture (BLT) through the maximum compressive load...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy comparison between subtractive and additive methods in fabricating working model

Song JK, Park KS, Kim MS, Kwon TY, Hong MH

The purpose of this study was to compare the accuracy of the working models fabricated by the subtractive and additive processing methods based on the 3-dimensional reconstruction model. A total...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Titania nanotube template based synthesis of gold nanotubes and their antibacterial activity

Moon KS, Oh SH, Jeoung CG, Bae JM, Oh S

In this study, gold nanotubes were fabricated by electrophoretic deposition using a titania nanotube layer as a template, and then the surface characteristics, biocompatibility and antibacterial effect of gold nanotubes...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr