- Effect of Liquefied Digestive Medicine on the Surface of Composite Resin
-
Kim MY, Lim HJ, Kim HE, Kim HJ, Yu HK, Choi SJ, Lim DS
- KMID: 2527505
- J Dent Hyg Sci.
- 2022 Mar;22(1):20-29.
- doi: 10.17135/jdhs.2022.22.1.20
Background: The purpose of this study is to investigate the effect of liquefied digestive medicines on the composite resin surface. Methods: Three types of liquefied digestive medicines (Gashwalmyeongsu, Wicheongsu, and Saengrokcheon)... -
- CITED
-
- Close
- SHARE
-
- Close
- Microhardness of resin cements after light activation through various translucencies of monolithic zirconia
-
Pechteewang S, Salimee P
- KMID: 2519398
- J Adv Prosthodont.
- 2021 Aug;13(4):246-257.
- doi: 10.4047/jap.2021.13.4.246
PURPOSE This study aimed to investigate the Vickers Hardness Number (VHN) of light- and dual cured resin cements cured through monolithic zirconia specimens (VITA YZ) of various translucencies: translucent (T);... -
- CITED
-
- Close
- SHARE
-
- Close
- Correlation between microhardness and wear resistance of dental alloys against monolithic zirconia
-
Cha MS, Lee SW, Huh YH, Cho LR, Park CJ
- KMID: 2516992
- J Adv Prosthodont.
- 2021 Jun;13(3):127-135.
- doi: 10.4047/jap.2021.13.3.127
Purpose: The aim of this study is to compare the hardness according to the conditions of metal alloys. Moreover, the correlation between the cast crown hardness before and after wear... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of coloring liquids on biaxial flexural strength of monolithic zirconia
-
Jung C, Kim MJ, Kim JH
- KMID: 2515221
- J Korean Acad Prosthodont.
- 2021 Apr;59(2):190-200.
- doi: 10.4047/jkap.2021.59.2.190
Purpose. The aim of this study was to evaluate biaxial flexural strength and hardness of colored monolithic zirconia after dipping in different time intervals of coloring solution. Materials and Methods.... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of sintering condition and aging on hardness and optical properties of monolithic zirconia
-
Kong MC, Park MG
- KMID: 2511998
- Korean J Dent Mater.
- 2020 Dec;47(4):221-234.
- doi: 10.14815/kjdm.2020.47.4.221
The purpose of this study was to examine the effect of hardness and optical properties of dental zirconia in accordance to sintering condition and aging. 10.0 mm×10.0 mm×1.5 mm zirconia... -
- CITED
-
- Close
- SHARE
-
- Close
- Remineralization effect of experimental fluoride varnish with nano-sized hydroxyapatite and tricalcium phosphate
-
Shin Sj, Son JL, Oh S, Bae JM
- KMID: 2511980
- Korean J Dent Mater.
- 2020 Sep;47(3):131-142.
- doi: 10.14815/kjdm.2020.47.3.131
The purpose of this study was to evaluate the remineralization effect of experimental fluoride varnish mixed with nano-tricalcium phosphate (TCP) and nano-hydroxyapatite (HA) on bovine teeth under demineralization and remineralization... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of Microhardness and Compressive Strength of Alkasite and Conventional Restorative Materials
-
Lee K, Kim J, Shin J, Han M
- KMID: 2505647
- J Korean Acad Pediatr Dent.
- 2020 Aug;47(3):320-326.
- doi: 10.5933/JKAPD.2020.47.3.320
The aim of this study was to compare compressive strength and microhardness of recently introduced alkasite restorative materials with glass ionomer cement and flowable composite resin. For each material, 20... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of modeling agents on the surface properties of an esthetic nano-hybrid composite
-
Kutuk ZB, Erden E, Aksahin DL, Durak ZE, Dulda AC
- KMID: 2503509
- Restor Dent Endod.
- 2020 May;45(2):e13.
- doi: 10.5395/rde.2020.45.e13
Objective: The aim of this study was to evaluate the influence of different modeling agents on the surface microhardness (Vickers hardness number; VHN), roughness (Ra), and color change (ΔE) of... -
- CITED
-
- Close
- SHARE
-
- Close
- Glenohumeral joint capsular tissue tension loading correlates moderately with shear wave elastography: a cadaveric investigation
-
Nichols CW, Brismée JM, Hooper TL, Bertrand-Grenier A, Gilbert KK, St-Pierre , Kapila J, Sobczak S
- KMID: 2501438
- Ultrasonography.
- 2020 Apr;39(2):114-120.
- doi: 10.14366/usg.19032
Purpose: The purpose of this study was to investigate changes in the mechanical properties of capsular tissue using shear wave elastography (SWE) and a durometer under various tensile loads, and... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of dental bleaching on the microhardness and surface roughness of sealed composite resins
-
Fernandes , Strazzi-Sahyon HB, Suzuki TY, Briso AL, dos Santos PH
- KMID: 2470346
- Restor Dent Endod.
- 2020 Feb;45(1):e12.
- doi: 10.5395/rde.2020.45.e12
OBJECTIVES: The aim of this in vitro study was to evaluate the microhardness and surface roughness of composite resins before and after tooth bleaching procedures. MATERIALS AND METHODS: Sixty specimens were... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of Commercial Effervescent Vitamin Tablets on Bovine Enamel
-
Jeong MJ, Lee MH, Jeong SJ, Kim SJ, Ko MJ, Sim HW, Lee JY, Im AJ, Lim DS
- KMID: 2469742
- J Dent Hyg Sci.
- 2019 Dec;19(4):261-270.
- doi: 10.17135/jdhs.2019.19.4.261
BACKGROUND: In this study, four types of effervescent vitamins marketed in Korea were analyzed for their acidity and vitamin content. For this purpose, bovine teeth were immersed in vitamin, and... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the Changes in Polymerization of TheraCal LC with Various Light-curing Time and Distance
-
Bae S, Lee J, Ra J
- KMID: 2467075
- J Korean Acad Pediatr Dent.
- 2019 Nov;46(4):392-399.
- doi: 10.5933/JKAPD.2019.46.4.392
The purpose of this study was to evaluate polymerization of TheraCal LC, one of the tricalcium silicate cements. To measure the Vickers hardness number (VHN), the specimens were cured at... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of preheating resin composites on surface hardness: a systematic review and meta-analysis
-
Elkaffas A, Eltoukhy R, Elnegoly S, Mahmoud SH
- KMID: 2463469
- Restor Dent Endod.
- 2019 Nov;44(4):e41.
- doi: 10.5395/rde.2019.44.e41
OBJECTIVES: This paper presents a systematic review and meta-analysis of the effect of preheating on the hardness of nanofilled, nanoceramic, nanohybrid, and microhybrid resin composites. MATERIALS AND METHODS: An electronic search... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of Nano-filled Protective Coating on Microhardness and Wear Resistance of Glass-ionomer Cements
-
Ryu W, Park H, Lee J, Seo H
- KMID: 2449984
- J Korean Acad Pediatr Dent.
- 2019 May;46(2):226-232.
- doi: 10.5933/JKAPD.2019.46.2.226
The purpose of this study was to investigate the effect of adding a protective coating on the microhardness and wear resistance of glass ionomer cements (GICs). Specimens were prepared from GIC... -
- CITED
-
- Close
- SHARE
-
- Close
- Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques
-
Ekici MA, Egilmez F, Cekic-Nagas I, Ergun G
- KMID: 2444147
- J Adv Prosthodont.
- 2019 Apr;11(2):128-137.
- doi: 10.4047/jap.2019.11.2.128
PURPOSE: The aim of this study was to compare the effect of different finishing and polishing techniques on water absorption, water solubility, and microhardness of ceramic or glass-polymer based computer-aided... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of color stability, mechanical and chemical properties according to temporary crown resin type
-
Yang SY, Kwon JY, No JS, Park SY, Park HE, Baek EJ, Im SY, Kwon JS
- KMID: 2448020
- Korean J Dent Mater.
- 2019 Mar;46(1):11-20.
- doi: 10.14815/kjdm.2019.46.1.11
Objective of this study was to compare the color stability, mechanical and chemical properties of three different types of temporary crown resins. Commercially available powder-liquid (Group PL), light-cured (Group LC)... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of Titratable Acidity and Organic Acids on Enamel Erosion In Vitro
-
Kim EJ, Jin BH
- KMID: 2446699
- J Dent Hyg Sci.
- 2019 Mar;19(1):1-8.
- doi: 10.17135/jdhs.2019.19.1.1
BACKGROUND: Erosion is a gradual process that occurs fairly quickly, and the full extent of the erosive effects of acidic beverages is not yet clear. The present study aimed to... -
- CITED
-
- Close
- SHARE
-
- Close
- Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: microhardness and roughness testing
-
Ehrmann E, Medioni E, Brulat-Bouchard N
- KMID: 2438287
- Restor Dent Endod.
- 2019 Feb;44(1):e1.
- doi: 10.5395/rde.2019.44.e1
OBJECTIVES: The aim of this in vitro study was to test the effect of 2 finishing–polishing sequences (QB, combining a 12/15-fluted finishing bur and an EVO-Light polisher; QWB, adding a... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of polymerization ability of resin-based materials used for teeth splinting
-
Lee JG, Kim SY, Lee JK, Kim JW, Park SH, Cho KM
- KMID: 2432365
- J Dent Rehabil Appl Sci.
- 2018 Dec;34(4):290-296.
- doi: 10.14368/jdras.2018.34.4.290
PURPOSE: The aim of this study was to evaluate the polymerization ability of resin-based materials used for teeth splinting according to the thickness of cure. MATERIALS AND METHODS: For this study,... -
- CITED
-
- Close
- SHARE
-
- Close
- Light transmittance of CAD/CAM ceramics with different shades and thicknesses and microhardness of the underlying light-cured resin cement
-
Jafari Z, Alaghehmand H, Samani Y, Mahdian M, Khafri S
- KMID: 2418460
- Restor Dent Endod.
- 2018 Aug;43(3):e27.
- doi: 10.5395/rde.2018.43.e27
OBJECTIVES: The aim of this in vitro study was to evaluate the effects of the thickness and shade of 3 types of computer-aided design/computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS: A... -
- CITED
-
- Close
- SHARE
-
- Close
