Skip Navigation
Skip to contents
Results by Year

View Wide

Filter

ARTICLE TYPE

PUBLICATION DATE

5 results
Display

A study on the fit of the implant-abutment-screw interface

Kim NH, Chung CH, Son MK, Back DH

  • KMID: 900153
  • J Korean Acad Prosthodont.
  • 2003 Aug;41(4):503-518.
STATEMENT OF PROBLEM: There have been previous studies about considerable variations in machining accuracy and consistency in the implant-abutment-screw interfaces. PURPOSE: The purpose of this study was to evaluate the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Relaltionship Between The Depth Access Hole And Prosthetic Components In Screw Retained Implants

Ko SM, Byun TH, Lee JB

  • KMID: 2196209
  • J Korean Acad Prosthodont.
  • 2002 Aug;40(4):374-385.
A total of 605 implant fixture prosthesis delivered by 3 clinics and 2 laboratories were examined in this study. The object of this study was to determine the proper length...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of the surface modifications and the use of washer on the reverse torque of the implant prosthetic gold retaining screw

Lee JH, Jang KS, Kim CW, Kim YS

  • KMID: 2195850
  • J Korean Acad Prosthodont.
  • 2002 Jun;40(3):246-261.
The screw loosening is one of the complications that happen frequently in dental implant prostheses. The purpose of this study was to evaluate the changes of reverse/loosening (opening) torque of the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Preliminary Study on the Design of Implant Abutment Screw Head for Rapid Fastening & loosening

Lee JB

  • KMID: 1578874
  • J Korean Acad Prosthodont.
  • 2002 Apr;40(2):193-200.
For the purpose of decreasing the chair time in implant cases,the time needed to loosening and fastening the screw must be shortened.Nowadays,the two typical designs of screw head are slot...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
THE EFFECTS OF FABRICATION AND TIGHTENING METHODS OF GOLD CYLINDER ON THE PRELOAD OF THE IMPLANT ABUTMENT

Cho HW, Kim SH

  • KMID: 2195965
  • J Korean Acad Prosthodont.
  • 2000 Oct;38(5):695-703.
The purpose of this study was to evaluate the effects of fabrication and tightening methods of gold cyliner on the preload of the standard abutment. Three linear strain gauges (KFR-02N-120C1-23,...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2021 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr