- Microscopical and chemical surface characterization of CAD/CAM zircona abutments after different cleaning procedures. A qualitative analysis
-
Gehrke P, Tabellion , Fischer C
- KMID: 2118246
- J Adv Prosthodont.
- 2015 Apr;7(2):151-159.
- doi: 10.4047/jap.2015.7.2.151
PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of scaling procedures on the integrity of titanium nitride coated CAD/CAM abutments
-
Gehrke P, Spanos E, Fischer C, Storck H, Tebbel F, Duddeck D
- KMID: 2413488
- J Adv Prosthodont.
- 2018 Jun;10(3):197-204.
- doi: 10.4047/jap.2018.10.3.197
PURPOSE: To determine the extent of treatment traces, the roughness depth, and the quantity of titanium nitride (TiN) removed from the surface of CAD/CAM abutments after treatment with various instruments. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- Microbiological cleaning and disinfection efficacy of a three-stage ultrasonic processing protocol for CAD-CAM implant abutments
-
Gehrke P, Riebe O, Fischer C, Weinhold O, Dhom G, Sader R, Weigl P
- KMID: 2534690
- J Adv Prosthodont.
- 2022 Oct;14(5):273-284.
- doi: 10.4047/jap.2022.14.5.273
PURPOSE. Computer-aided design and manufacturing (CAD-CAM) of implant abutments has been shown to result in surface contamination from site-specific milling and fabrication processes. If not removed, these contaminants can have... -
- CITED
-
- Close
- SHARE
-
- Close
