- The polymerization efficiency of a bulk-fill composite based on matrixmodification technology
-
Elshazly TM, Bourauel C, Aboushelib MN, Sherief DI, El-Korashy DI
- KMID: 2512023
- Restor Dent Endod.
- 2020 Aug;45(3):e32.
- doi: 10.5395/rde.2020.45.e32
Objectives: To evaluate the polymerization efficiency of a matrix-modified bulk-fill composite, and compare it to a conventional composite which has a similar filler system. The degree of conversion (DC%) and monomer... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of thickness and translucency of polymer-infiltrated ceramic-network material on degree of conversion of resin cements
-
Barutcigil K, Büyükkaplan U
- KMID: 2502329
- J Adv Prosthodont.
- 2020 Apr;12(2):61-66.
- doi: 10.4047/jap.2020.12.2.61
PURPOSE. The aim of the present study was to determine the degree of conversion of light- and dual-cured resin cements used in the cementation of all-ceramic restorations under different thicknesses... -
- CITED
-
- Close
- SHARE
-
- Close
- Degree of Conversion and Polymerization Shrinkage of Low and High Viscosity Bulk-Fill Giomer-based and Resin-based composites
-
Kim H, Lee J, Kim H, Kwon T, Nam S
- KMID: 2441491
- J Korean Acad Pediatr Dent.
- 2019 Feb;46(1):1-9.
- doi: 10.5933/JKAPD.2019.46.1.1
The aim of this study was to compare the degree of conversion and polymerization shrinkage of low and high viscosity bulk-fill giomer-based and resin-based composites. Two bulk-fill giomer (Beautifil Bulk... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of 457 nm light on the polymerization of dental composite resins
-
Ro JH, Yi DH, Seol HJ, Kwon YH
- KMID: 2423003
- Korean J Dent Mater.
- 2018 Sep;45(3):179-186.
- doi: 10.14815/kjdm.2018.45.3.179
The aim of this study was to determine if a 457 nm blue laser could effectively polymerize dental composite resins. After light curing 6 dental composite resins using a laser... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of radiant exposure and wavelength spectrum of light-curing units on chemical and physical properties of resin cements
-
Lima AF, Formaggio , Zambelli L, Palialol A, Marchi GM, Saraceni C, de Oliveira MT
- KMID: 2356003
- Restor Dent Endod.
- 2016 Nov;41(4):271-277.
- doi: 10.5395/rde.2016.41.4.271
OBJECTIVES: In this study, we evaluated the influence of different radiant exposures provided by single-peak and polywave light-curing units (LCUs) on the degree of conversion (DC) and the mechanical properties... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of 4,4'-bis(N,N-diethylamino) benzophenone on the degree of conversion in liquid photopolymer for dental 3D printing
-
Lee DH, Mai HN, Yang JC, Kwon TY
- KMID: 2083882
- J Adv Prosthodont.
- 2015 Oct;7(5):386-391.
- doi: 10.4047/jap.2015.7.5.386
PURPOSE: The purpose of this preliminary study was to investigate the effects of adding 4,4'-bis(N,N-diethylamino) benzophenone (DEABP) as a co-initiator to a binary photoinitiating system (camphorquinone-amine) to analyze on the... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of dentin bonding agent formulas on their polymerization quality, and together with tooth tissues on their microleakage and shear bond strength: an explorative 3-step experiment
-
Erfan M, Jafarzadeh-Kashi TS, Ghadiri M, Rakhshan V
- KMID: 2284733
- J Adv Prosthodont.
- 2014 Oct;6(5):333-345.
- doi: 10.4047/jap.2014.6.5.333
PURPOSE: Bonding agents (BA) are the crucial weak link of composite restorations. Since the commercial materials' compositions are not disclosed, studies to formulize the optimum ratios of different components are... -
- CITED
-
- Close
- SHARE
-
- Close
- Temperature changes under demineralized dentin during polymerization of three resin-based restorative materials using QTH and LED units
-
Mousavinasab SM, Khoroushi , Moharreri , Atai M
- KMID: 2316889
- Restor Dent Endod.
- 2014 Aug;39(3):155-163.
OBJECTIVES: Light-curing of resin-based materials (RBMs) increases the pulp chamber temperature, with detrimental effects on the vital pulp. This in vitro study compared the temperature rise under demineralized human tooth... -
- CITED
-
- Close
- SHARE
-
- Close
- Degree of conversion of resin composite cured by light through a translucent fiber posts
-
Urapepon S
- KMID: 2118230
- J Adv Prosthodont.
- 2014 Jun;6(3):194-199.
- doi: 10.4047/jap.2014.6.3.194
PURPOSE: This study evaluated the depth of cure of resin composite cured by light through a translucent fiber post. MATERIALS AND METHODS: The opaque plastic tubes in various lengths of 2,... -
- CITED
-
- Close
- SHARE
-
- Close
- Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks
-
Kim MJ, Kim KH, Kim YK, Kwon TY
- KMID: 2176540
- J Adv Prosthodont.
- 2013 Nov;5(4):464-470.
- doi: 10.4047/jap.2013.5.4.464
PURPOSE: The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of CQ-amine ratio on the degree of conversion in resin monomers with binary and ternary photoinitiation systems
-
Moon HJ, Shin DH
- KMID: 2316813
- Restor Dent Endod.
- 2012 May;37(2):96-102.
OBJECTIVES: This study evaluated the effect of camphorquinone (CQ)-amine ratio on the C=C double bond conversion of resins with binary and ternary photoinitiation systems. MATERIALS AND METHODS: Two monomer mixtures (37.5... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of the color components of light-cured composite resin before and after polymerization on degree of conversion and flexural strength
-
Yoo JA, Cho BH
- KMID: 1986695
- J Korean Acad Conserv Dent.
- 2011 Jul;36(4):324-335.
- doi: 10.5395/JKACD.2011.36.4.324
OBJECTIVES: This study investigated the effects of the color components of light-cured composite resin before and after polymerization on degree of conversion (DC) and biaxial flexural strength (FS). MATERIALS AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- Optimal combination of 3-component photoinitiation system to increase the degree of conversion of resin monomers
-
Kim CG, Moon HJ, Shin DH
- KMID: 1986694
- J Korean Acad Conserv Dent.
- 2011 Jul;36(4):313-323.
- doi: 10.5395/JKACD.2011.36.4.313
OBJECTIVES: This study investigated the optimal combination of 3-component photoinitiation system, consisting of CQ, p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), and 2-dimethylaminoethyl methacrylate (DMAEMA) to increase the degree of conversion of resin... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of solvent evaporation of dentin adhesive on bonding efficacy
-
Cho MW, Kim JY, Kim DS, Choi KK
- KMID: 2176430
- J Korean Acad Conserv Dent.
- 2010 Sep;35(5):321-334.
- doi: 10.5395/JKACD.2010.35.5.321
OBJECTIVES: The purpose of this study is to evaluate bonding efficacy by means of measuring the effect of remained solvent on Degree of conversion(DC) and microTBS and FE-SEM examination. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of pre-heating on some physical properties of composite resin
-
Jin MU, Kim SK
- KMID: 2176040
- J Korean Acad Conserv Dent.
- 2009 Jan;34(1):30-37.
- doi: 10.5395/JKACD.2009.34.1.030
The purpose of this study was to evaluate the effect of pre-heating on some physical properties of composite resin. Eighty extracted, noncarious human molars were used in the present study. Four... -
- CITED
-
- Close
- SHARE
-
- Close
- Degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials
-
Kim SH, Watts DC
- KMID: 2321756
- J Korean Acad Prosthodont.
- 2008 Dec;46(6):639-643.
STATEMENT OF PROBLEM: The degree of conversion may influence the ultimate mechanical and physical properties of provisional crown and fixed partial denture materials. The high levels of the unreacted residual... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of mechanical properties in 4 indirect composite resin
-
Kim KS, Yoon TH, Song KY, Ahn SG
- KMID: 2195694
- J Korean Acad Prosthodont.
- 2007 Feb;45(1):21-33.
STATEMENT OF PROBLEM: The esthetic component of dental care has become increasingly more important, while new tooth-colored materials are continually marketed. Various new indirect composite materials have been developed with... -
- CITED
-
- Close
- SHARE
-
- Close
- Aging effect on the microtensile bond strength of self-etching adhesives
-
Park JS, Kim JS, Kim MS, Son HH, Kwon HC, Cho BH
- KMID: 1986884
- J Korean Acad Conserv Dent.
- 2006 Nov;31(6):415-426.
- doi: 10.5395/JKACD.2006.31.6.415
In this study, the changes in the degree of conversion (DC) and the microtensile bond strength (MTBS) of self-etching adhesives to dentin was investigated according to the time after curing.... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study between degree of conversion and flexural strength of composite resins
-
Lee SH, Pae AR, Kim SH
- KMID: 2000684
- J Korean Acad Prosthodont.
- 2006 Jun;44(3):333-342.
Statement of problem. Although many studies have been carried out to investigate the correlation between the degree of conversion and the flexural strength of composite resins, there is minimal... -
- CITED
-
- Close
- SHARE
-
- Close
- The polymerization rate and the degree of conversion of composite resins by different light sources
-
Ryoo JH, Lee IB, Yoo HM, Kim MJ, Seok CI, Kwon HC
- KMID: 2175633
- J Korean Acad Conserv Dent.
- 2004 Jul;29(4):386-398.
- doi: 10.5395/JKACD.2004.29.4.386
OBJECTIVES: The purpose of this study was to observe the reaction kinetics and the degree of polymerization of composite resins when cured by different light sources and to evaluate the... -
- CITED
-
- Close
- SHARE
-
- Close
