- Comparison of retentive force and wear pattern of Locator® and ADD-TOC attachments combined with CAD-CAM milled bar
-
Chae SK, Cho WT, Choi JW, Bae EB, Bae JH, Bae GH, Huh JB
- KMID: 2526754
- J Adv Prosthodont.
- 2022 Feb;14(1):12-21.
- doi: 10.4047/jap.2022.14.1.12
PURPOSE The purpose of this study was to investigate changes in retention and wear pattern of Locator® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and... -
- CITED
-
- Close
- SHARE
-
- Close
- Survey study on the Preference of Dental Medical Personnel for Dental CAD/CAM Milling Machines
-
Song ES, Kim B, Lim YJ, Lee JJ
- KMID: 2416810
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):188-198.
- doi: 10.4047/jkap.2018.56.3.188
PURPOSE: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry.... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of internal adaptation of removable partial denture metal frameworks made by lost wax technique and printing technique of pattern using CAD
-
Choi W, Woo YH, Kim HS, Paek J
- KMID: 2402983
- J Korean Acad Prosthodont.
- 2018 Jan;56(1):17-24.
- doi: 10.4047/jkap.2018.56.1.17
Lost wax technique of casting wax patterns has been used principally to make metal frameworks of removable partial dentures. Since the development of digital technology and CAD, metal frameworks can... -
- CITED
-
- Close
- SHARE
-
- Close
- Fixed prosthesis restoration in edentulous patient fully implanted without considering definitive prosthesis: A case report
-
Chun YH, Pae A, Kwon KR, Kim HS
- KMID: 2393915
- J Korean Acad Prosthodont.
- 2017 Oct;55(4):427-435.
- doi: 10.4047/jkap.2017.55.4.427
The most important factor in the treatment of fully edentulous patients using implants is the shape of the definitive prosthesis. After the shape of the definitive prosthesis is determined, residual... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of coloring agent on the color of zirconia
-
Kim K, Noh K, Pae A, Woo YH, Kim HS
- KMID: 2391544
- J Korean Acad Prosthodont.
- 2017 Jan;55(1):18-25.
- doi: 10.4047/jkap.2017.55.1.18
PURPOSE: The aim of this study was to evaluate the effect of two types of coloring agents and the number of application on the color of zirconia. MATERIALS AND METHODS: Monolithic... -
- CITED
-
- Close
- SHARE
-
- Close
- Rehabilitation using twin-stage method for a Sjögren's syndrome patient with severe discoloration and attrition on upper and lower anterior teeth
-
Lee SK, Yang HS, Park SW, Lim HP, Yun KD
- KMID: 2344870
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):291-297.
- doi: 10.4047/jkap.2016.54.3.291
Patients with Sjögren's syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony,... -
- CITED
-
- Close
- SHARE
-
- Close
- Mandibular implant-supported overdenture using CAD-CAM Konus type attachment: A case report
-
Park JH, Kim IJ, Kim KA, Song KY, Seo JM
- KMID: 2344865
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):259-266.
- doi: 10.4047/jkap.2016.54.3.259
In edentulous mandible, implant supported overdenture was considered as a first treatment option. Konus type attachment supplies rigid support and cross arch stabilization so that more favorable force transmission and... -
- CITED
-
- Close
- SHARE
-
- Close
- Superimposition: a simple method to minimize occlusal adjustment of monolithic restoration
-
Choi C, Kim S
- KMID: 2344864
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):253-258.
- doi: 10.4047/jkap.2016.54.3.253
The development of translucent zirconia enabled clinicians to choose a monolithic zirconia crown as one treatment modality in the posterior dentition. Careful occlusal adjustments are recommended for monolithic zirconia crowns... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of crown designs of different dental occupational groups, using CAD-CAM
-
Kim T, Kim JE, Lee AR, Park YB
- KMID: 2344861
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):234-238.
- doi: 10.4047/jkap.2016.54.3.234
PURPOSE: Increasing use of computer aided design-computer aided manufacturing (CAD-CAM) system and number of design software made design of restoration easy and quick. Outcome of restoration has been dependent on... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of micro CT and cross-section technique for evaluation of marginal and internal fit of lithium disilicate crowns
-
Ko IS, Kim JM, Cho HW
- KMID: 2344860
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):226-233.
- doi: 10.4047/jkap.2016.54.3.226
PURPOSE: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of marginal and internal gap under model-free monolithic zirconia restoration fabricated by digital intraoral scanner
-
Lee JW, Park JM
- KMID: 2344858
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):210-217.
- doi: 10.4047/jkap.2016.54.3.210
PURPOSE: The aim of this study was to evaluate the marginal and internal adaptation of monolithic zirconia restoration made without physical model by digital intraoral scanner. MATERIALS AND METHODS: A prospective... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of dental CAD-CAM hybrid restorative materials repaired with composite resin
-
Moon YH, Lee J, Lee MG
- KMID: 2344856
- J Korean Acad Prosthodont.
- 2016 Jul;54(3):193-202.
- doi: 10.4047/jkap.2016.54.3.193
PURPOSE: This study was performed in order to assess the effect of the surface treatment methods and the use of bonding agent on the shear bond strength (SBS) between the... -
- CITED
-
- Close
- SHARE
-
- Close
- Development of CAD/CAM Based Brace Models for the Treatment of Patients with Scoliosis-Classification Based Approach versus Finite Element Modelling
-
Weiss HR, Kleban A
- KMID: 2148357
- Asian Spine J.
- 2015 Oct;9(5):661-667.
- doi: 10.4184/asj.2015.9.5.661
STUDY DESIGN: Retrospective controlled cohort study comparing the in-brace correction of two samples of scoliosis patients with braces of different computer aided design (CAD). PURPOSE: In-brace correction and compliance correlate with... -
- CITED
-
- Close
- SHARE
-
- Close
- Application of Virtual Surgical Planning with Computer Assisted Design and Manufacturing Technology to Cranio-Maxillofacial Surgery
-
Zhao L, Patel PK, Cohen M
- KMID: 2120682
- Arch Plast Surg.
- 2012 Jul;39(4):309-316.
- doi: 10.5999/aps.2012.39.4.309
Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical... -
- CITED
-
- Close
- SHARE
-
- Close
- Cementless Press-Fit and Fibrous or Bony Ingrowth "Asian Total Hip Prosthesis" Design Using Computed Axial Tomography and Computer Aided Design and Computer Aided
-
Kim YH, Kim SJ, Kim WK, Park YP, Suh JS, Chung IH
- KMID: 693060
- Yonsei Med J.
- 1987 Mar;28(1):18-22.
- doi: 10.3349/ymj.1987.28.1.18
The purpose of this study was to design intramedullary femoral stems that will optimally distribute the stresses to the bone. It was postulated that an ideal distribution of stresses would... -
- CITED
-
- Close
- SHARE
-
- Close
