Skip Navigation
Skip to contents
Results by Year

View Wide

Filter

ARTICLE TYPE

more+
SELECT FILTER
 
Close

PUBLICATION DATE

99 results
Display

A CAD/CAM-based strategy for concurrent endodontic and restorative treatment

Escobar PM, Kishen A, Lopes FC, Borges CC, Kegler EG, Sousa-Neto MD

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM)...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
In vivo wear determination of novel CAD/CAM ceramic crowns by using 3D alignment

Aladağ A, Oğuz D, Çömlekoğlu ME, Akan E

PURPOSE: To determine wear amount of single molar crowns, made from four different restoratives, and opposing natural teeth through computerized fabrication techniques using 3D image alignment. MATERIALS AND METHODS: A total...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Shear bond strength of zirconia to resin: The effects of specimen preparation and loading procedure

Chen B, Yang L, Lu Z, Meng H, Wu X, Chen C, Xie H

PURPOSE: Shear bond strength (SBS) test is the most commonly used method for evaluating resin bond strength of zirconia, but SBS results vary among different studies even when evaluating the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of individualization of fiberglass posts using bulk-fill resin-based composites on cementation: an in vitro study

Lins RB, Cordeiro J, Rangel CP, Antunes TB, Martins LR

OBJECTIVES: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. MATERIALS AND METHODS: The roots from a total of 100 bovine incisors were randomly...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Stem Fixation in Revision Total Knee Arthroplasty: Indications, Stem Dimensions, and Fixation Methods

Kang SG, Park CH, Song SJ

Although stems improve initial mechanical stability in revision total knee arthroplasty (TKA), ideal indications, proper lengths and diameters, and appropriate fixation methods remain controversial. The topics of the present article...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Microtensile bond strength of resin cement primer containing nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) to human dentin

Arjmand N, Boruziniat A, Zakeri M, Mohammadipour HS

PURPOSE: The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of continuous application of MDP-containing primer and luting resin cement on bond strength to tribochemical silica-coated Y-TZP

Lim MJ, Yu MK, Lee KW

OBJECTIVES: This study investigated the effect of continuous application of 10-methacryloyloxydecyldihydrogen phosphate (MDP)-containing primer and luting resin cement on bond strength to tribochemical silica-coated yttria-stabilized tetragonal zirconia polycrystal (Y-TZP). MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
In-vitro performance and fracture strength of thin monolithic zirconia crowns

Weigl P, Sander A, Wu Y, Felber R, Lauer HC, Rosentritt M

PURPOSE: All-ceramic restorations required extensive tooth preparation. The purpose of this in vitro study was to investigate a minimally invasive preparation and thickness of monolithic zirconia crowns, which would provide...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of nano alumina coating on the flexural bond strength between zirconia and resin cement

Akay C, Tanış MC, Mumcu E, Kılıçarslan MA, Şen M

PURPOSE: The purpose of this in vitro study is to examine the effects of a nano-structured alumina coating on the adhesion between resin cements and zirconia ceramics using a four-point...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of abutment diameter, luting agent type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments

Safari S, Hosseini Ghavam F, Amini P, Yaghmaei K

PURPOSE: The aim of this study was to evaluate the effects of abutment diameter, cement type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Shear bond strength of luting cements to fixed superstructure metal surfaces under various seating forces

Ozer F, Pak-Tunc E, Dagli NE, Ramachandran D, Sen D, Blatz MB

PURPOSE: In this study, the shear bond strengths (SBS) of luting cements to fixed superstructure metal surfaces under various seating forces were investigated. MATERIALS AND METHODS: Seven different cements [Polycarboxylate (PCC),...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Tooth surface treatment strategies for adhesive cementation

Rohr N, Fischer J

PURPOSE: The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of repeated bonding on the shear bond strength of different resin cements to enamel and dentin

Bulut AC, Atsü SS

PURPOSE: Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full Cementation in Revision Total Knee Arthroplasty Using a Constrained Condylar Knee Prosthesis with an Average 7-Year Follow-up

Kwon KT, Han KY, Lee WS, Kim DH

PURPOSE: To evaluate clinical and radiological outcome of the full cementation technique in revision total knee arthroplasty (TKA) using a constrained condylar knee (CCK) prosthesis. MATERIALS AND METHODS: Between January 2008...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement

Kömürcüoğlu MB, Sağırkaya E, Tulga A

PURPOSE: To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. MATERIALS AND METHODS: The CAD/CAM...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effectiveness of optical coherence tomography for evaluating peri-implant tissue: A pilot study

Sanda M, Shiota M, Imakita C, Sakuyama A, Kasugai S, Sumi Y

PURPOSE: Optical coherence tomography (OCT) has been investigated as a novel diagnostic imaging tool. The utilisation of this equipment has been evaluated through several studies in the field of dentistry....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A technique for fabricating abutment replica with hot melt adhesive material to minimize residual cement in implant restoration: a case report

Seo CW, Han AR, Seo JM, Lee JJ

Removal of excess cement is important to prevent biological complication in cementation of implant restoration with subgingival margin. It can be difficult to completely remove excess cement. Several techniques have...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of dimethyl sulfoxide on bond durability of fiber posts cemented with etch-and-rinse adhesives

Shafiei F, Memarpour , Sarafraz Z

PURPOSE: This study was undertaken to investigate whether use of an adhesive penetration enhancer, dimethyl sulfoxide (DMSO), improves bond stability of fiber posts to root dentin using two two-step etch-and-rinse...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
3D micro-CT analysis of void formations and push-out bonding strength of resin cements used for fiber post cementation

Uzun ÄH, Malkoç MA, KeleÅŸ A, Öğreten

PURPOSE: To investigate the void parameters within the resin cements used for fiber post cementation by micro-CT (µCT) and regional push-out bonding strength. MATERIALS AND METHODS: Twenty-one, single and round shaped...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement

Pyun JH, Shin TB, Lee JH, Ahn KM, Kim TH, Cha HS

PURPOSE: To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS: The specimens...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2022 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr