- Maxillary space closure using a digital manufactured Mesialslider in a single appointment workflow
-
Wilhelmy L, Willmann JH, Tarraf NE, Wilmes B, Drescher D
- KMID: 2529946
- Korean J Orthod.
- 2022 May;52(3):236-245.
- doi: 10.4041/kjod21.203
New digital technologies, many involving three-dimensional printing, bring benefits for clinical applications. This article reports on the clinical procedure and fabrication of a skeletally anchored mesialization appliance (Mesialslider) using computer-aided... -
- CITED
-
- Close
- SHARE
-
- Close
- Color stability of 3D-printed denture resins: effect of aging, mechanical brushing and immersion in staining medium
-
Alfouzan AF, Alotiabi HM, Labban N, Al-Otaibi HN, Al Taweel SM, AlShehri HA
- KMID: 2516996
- J Adv Prosthodont.
- 2021 Jun;13(3):160-171.
- doi: 10.4047/jap.2021.13.3.160
Purpose This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods Forty... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of feasibility, time consumption and costs of three virtual planning systems for surgical correction of midfacial deficiency
-
Willinger K, Guevara-Rojas G, Cede J, Schicho K, Stamm T, Klug C
- KMID: 2525744
- Maxillofac Plast Reconstr Surg.
- 2021;43(1):2.
- doi: 10.1186/s40902-020-00284-1
Background: Today virtual surgical planning (VSP) is a standard method in maxillofacial corrective surgery and is the key to reach satisfactory esthetic outcomes. The purpose of this study was to... -
- CITED
-
- Close
- SHARE
-
- Close
- A Novel Digital Approach for Forced Eruption
-
Ju C, Lee Y, Hong Sj, Noh K, Paek J
- KMID: 2511898
- Implantology.
- 2020 Dec;24(4):219-225.
- doi: 10.32542/implantology.202020
Forced eruption has been proposed to expose subgingival carious lesion and achieve the biologic width when treating a tooth with subgingival dental caries. The aim of this report was to... -
- CITED
-
- Close
- SHARE
-
- Close
- How adjustment could affect internal and marginal adaptation of CAD/CAM crowns made with different materials
-
Hasanzade M, Moharrami M, Alikhasi M
- KMID: 2509772
- J Adv Prosthodont.
- 2020 Dec;12(6):344-350.
- doi: 10.4047/jap.2020.12.6.344
PURPOSE Recently introduced hybrid and reinforced glass ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials have been used for full-coverage restorations. However; the effect of adjustment and type of materials on internal... -
- CITED
-
- Close
- SHARE
-
- Close
- Biomechanical behavior of CAD/CAM cobaltchromium and zirconia full-arch fixed prostheses
-
Barbin T, Silva LDR, Velôso DV, Borges GA, Presotto AGC, Barão VAR, Groppo FC, Mesquita MF
- KMID: 2509766
- J Adv Prosthodont.
- 2020 Dec;12(6):329-337.
- doi: 10.4047/jap.2020.12.6.329
PURPOSE To verify the influence of computer-aided design/computer-aided manufacturing (CAD/CAM) implantsupported prostheses manufactured with cobalt-chromium (Co-Cr) and zirconia (Zr), and whether ceramic application, spark erosion, and simulation of masticatory cycles... -
- CITED
-
- Close
- SHARE
-
- Close
- Innovative customized CAD/CAM nickel-titanium lingual retainer versus standard stainless-steel lingual retainer: A randomized controlled trial
-
Gelin E, Seidel L, Bruwier A, Albert A, Charavet C
- KMID: 2508444
- Korean J Orthod.
- 2020 Nov;50(6):373-382.
- doi: 10.4041/kjod.2020.50.6.373
Objective: To compare computer-aided design and computer-aided manufacturing (CAD/CAM) customized nitinol retainers with standard stainlesssteel fixed retainers over a 12-month study period. Methods: This randomized controlled trial (RCT) was conducted... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strengths of aged and non-aged CAD/CAM materials after different surface treatments
-
Kilinc H, Sanal FA, Turgut S
- KMID: 2508420
- J Adv Prosthodont.
- 2020 Oct;12(5):273-282.
- doi: 10.4047/jap.2020.12.5.273
PURPOSE To assess shear bond strengths (SBS) of resin composites on aged and non-aged prosthetic materials with various surface treatments. MATERIALS AND METHODS Cerasmart (CE), Vita Enamic (VE), Vita Mark II (VM),... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement
-
Han SY, Moon YH, Lee Jh
- KMID: 2508417
- J Adv Prosthodont.
- 2020 Oct;12(5):251-258.
- doi: 10.4047/jap.2020.12.5.251
PURPOSE The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and CAD/CAM purposed materials were evaluated to find influence of each material. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of flexural strength according to thickness between CAD/CAM denture base resins and conventional denture base resins
-
Lee DH, Lee JS
- KMID: 2512113
- J Dent Rehabil Appl Sci.
- 2020 Sep;36(3):183-195.
- doi: 10.14368/jdras.2020.36.3.183
Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of fracture strength after thermomechanical aging between provisional crowns made with CAD/CAM and conventional method
-
Reeponmaha T, Angwaravong O, Angwarawong T
- KMID: 2505361
- J Adv Prosthodont.
- 2020 Aug;12(4):218-224.
- doi: 10.4047/jap.2020.12.4.218
PURPOSE. The objectives of this study were to evaluate the fracture strength and fracture patterns of provisional crowns fabricated from different materials and techniques after receiving stress from a simulated... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of different surface treatments on the shear bond strengths of two dual-cure resin cements to CAD/CAM restorative materials
-
Turker N, Buyukkaplan U, Başar EK, Özarslan MM
- KMID: 2505357
- J Adv Prosthodont.
- 2020 Aug;12(4):189-196.
- doi: 10.4047/jap.2020.12.4.189
PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Digital approach for fabrication of zirconia restoration with optimal gingival adaptation after tooth extraction: A case report
-
Mai HN, Lee DH
- KMID: 2504689
- J Korean Acad Prosthodont.
- 2020 Jul;58(3):217-220.
- doi: 10.4047/jkap.2020.58.3.217
Conventionally, when a zirconia fixed dental restoration is planned, the interim restoration is made manually and the final restoration is fabricated by the silicone impression taking at the prosthodontic stage.... -
- CITED
-
- Close
- SHARE
-
- Close
- Tensile bond strength of chairside reline resin to denture bases fabricated by subtractive and additive manufacturing
-
Kim HS, Jung JH, Bae JM, Kim JM, Kim YL
- KMID: 2504684
- J Korean Acad Prosthodont.
- 2020 Jul;58(3):177-184.
- doi: 10.4047/jkap.2020.58.3.177
Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface finishing treatments on the color stability of CAD/CAM materials
-
Ozen F, Demirkol N, Oz OP
- KMID: 2504123
- J Adv Prosthodont.
- 2020 Jun;12(3):150-156.
- doi: 10.4047/jap.2020.12.3.150
PURPOSE. The aim of this study was to evaluate the effect of different surface finishing processes on the color stabilities of lithium disilicate glass-ceramics, zirconia-reinforced lithium silicate ceramics, and resin... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the repair capacities and color stabilities of a resin nanoceramic and hybrid CAD/CAM blocks
-
Bahadır HS, Bayraktar Y
- KMID: 2504122
- J Adv Prosthodont.
- 2020 Jun;12(3):140-149.
- doi: 10.4047/jap.2020.12.3.140
PURPOSE. This study evaluated the color stabilities of two computer-aided design and computer-aided manufacturing (CAD/CAM) blocks and a nanofill composite resin and the microtensile bond strength (μTBS) between the materials.... -
- CITED
-
- Close
- SHARE
-
- Close
- Repair bond strength of resin composite to three aged CAD/CAM blocks using different repair systems
-
Gul P, Altınok-Uygun L
- KMID: 2504121
- J Adv Prosthodont.
- 2020 Jun;12(3):131-139.
- doi: 10.4047/jap.2020.12.3.131
PURPOSE. The purpose of this study is to evaluate the repair bond strength of a nanohybrid resin composite to three CAD/CAM blocks using different intraoral ceramic repair systems. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Fitting accuracy of ceramic veneered Co-Cr crowns produced by different manufacturing processes
-
Maltzahn NFv, Bernhard F, Kohorst P
- KMID: 2502334
- J Adv Prosthodont.
- 2020 Apr;12(2):100-106.
- doi: 10.4047/jap.2020.12.2.100
PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and... -
- CITED
-
- Close
- SHARE
-
- Close
- Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique
-
Yoon SN, Han JS, Yeo IS, Yoon HI
- KMID: 2469923
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):67-76.
- doi: 10.4047/jkap.2020.58.1.67
With the evolution of the computer-aided design/computer-aided manufacturing (CAD/CAM) technology, the intraoral scanners are playing an increasingly important role, as they are the first step towards a completely digital workflow.... -
- CITED
-
- Close
- SHARE
-
- Close
- The treatment of an edentulous patient with conventional complete denture and CAD/CAM complete denture
-
Cho S, Lee J
- KMID: 2469920
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):42-49.
- doi: 10.4047/jkap.2020.58.1.42
In patients with fully edentulous jaw, treatment of complete dentures should be carried out in many stages when following the conventional methods. Therefore there were disadvantages such as multiple visits... -
- CITED
-
- Close
- SHARE
-
- Close
